SIST EN 61169-37:2007
(Main)Radio-frequency connectors -- Part 37: Sectional specification for STWX8 R.F connectors
Radio-frequency connectors -- Part 37: Sectional specification for STWX8 R.F connectors
This part of IEC 61169, which is a Sectional Specification (SS), provides information and rules for the preparation of Detail Specifications (DS) for type STWX8 R.F. coaxial connectors with push-pull self-lock coupling. The connectors are normally used with flexible and semi-rigid R.F. cables for middle power applications in conjunction with 50 ? cables in an operating frequency range up to 4 GHz. It describes the interface dimensions for general purpose grade 2 connectors, dimensional details for standard test connectors, grade 0, together with gauging information and the mandatory tests selected from QC 220000 (IEC 61169-1), applicable to all DS relating to type STWX8 connectors. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements.
Hochfrequenz-Steckverbinder - Teil 37: Rahmenspezifikationen - STWX8-Hochfrequenzsteckverbinder
Connecteurs pour fréquences radioélectriques -- Partie 37: Spécification intermédiaire relative aux connecteurs pour fréquences radioélectriques de type STWX8
L'IEC 61169-37:2007 est une spécification intermédiaire qui fournit des informations et des règles pour la préparation des spécifications particulières pour les connecteurs coaxiaux pour fréquences radioélectriques de série STWX8 avec accouplement autobloquant push-pull.
Radiofrekvenčni konektorji – 37. del: Področna specifikacija za RF konektorje tipa STWX8 (IEC 61169-37:2007)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Radio-frequency connectors -- Part 37: Sectional specification for STWX8 R.F connectors (IEC 61169-37:2007)Connecteurs pour fréquences radioélectriques -- Partie 37: Spécification intermédiaire relative aux connecteurs pour fréquences radioélectriques de type STWX8 (IEC 61169-37:2007)Hochfrequenz-Steckverbinder - Teil 37: Rahmenspezifikationen - STWX8-Hochfrequenzsteckverbinder (IEC 61169-37:2007)Ta slovenski standard je istoveten z:EN 61169-37:2007SIST EN 61169-37:2007en,de33.120.305)R.F. connectorsICS:SLOVENSKI
STANDARDSIST EN 61169-37:200701-november-2007
EUROPEAN STANDARD EN 61169-37 NORME EUROPÉENNE
EUROPÄISCHE NORM April 2007
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61169-37:2007 E
ICS 33.120.30
English version
Radio-frequency connectors -
Part 37: Sectional specification
for STWX8 R.F connectors (IEC 61169-37:2007)
Connecteurs pour fréquences radioélectriques -
Partie 37: Spécification intermédiaire relative aux connecteurs
pour fréquences radioélectriques
de type STWX8 (CEI 61169-37:2007)
Hochfrequenz-Steckverbinder -
Teil 37: Rahmenspezifikationen -
STWX8-Hochfrequenzsteckverbinder (IEC 61169-37:2007)
This European Standard was approved by CENELEC on 2007-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
EN 61169-37:2007
- 2 -
Foreword The text of document 46F/44/CDV, future edition 1 of IEC 61169-37, prepared by SC 46F, R.F. and microwave passive components, of IEC TC 46, Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories, was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure and was approved by CENELEC as EN 61169-37 on 2007-03-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2007-12-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2010-03-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61169-37:2007 was approved by CENELEC as a European Standard without any modification. __________
- 3 - EN 61169-37:2007 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60096 Series Radio-frequency cables -
-
IEC 61169-1 A1 A2 1992 1996 1997 Radio-frequency connectors -
Part 1: Generic specification - General requirements and measuring methods EN 61169-1 A1 A2 1994 1996 1997
INTERNATIONAL STANDARD IEC61169-37QC 222400 First edition2007-02 Radio-frequency connectors – Part 37: Sectional specification – STWX8 R.F. connectors © IEC 2007
⎯
Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch
Web: www.iec.ch T For price, see current cataloguePRICE CODE
Commission Electrotechnique InternationaleInternational Electrotechnical Commission
– 2 – 61169-37 © IEC:2007(E) CONTENTS FOREWORD.3
1 Scope.5 2 Normative references.5 3 Mating face and gauge information.5 3.1 Dimensions - General connectors – Grade 2 (Figure 1).5 3.2 Gauges for general purpose connectors - Grade 2.7 3.3 Dimensions – standard test connectors – Grade 0.10 4 Quality assessment procedure.13 4.1 General.13 4.2 Rating and characteristics (see Clause 6 of IEC 61169-1 (QC 220000)).13 4.3 Test schedule and inspection requirements - Acceptance tests.16 4.4 Procedures.19 5 Instructions for preparation of detail specifications.19 5.1 General.19 5.2 Identification of the detail specification.19 5.3 Identification of the component.19 5.4 Performance.20 5.5 Marking, ordering information and related matters.20 5.6 Selection of tests, tests conditions and severities.20 5.7 Blank detail specification pro-forma for type STWX 8 connectors.20
Figure 1 – Mating face of STWX8 connectors (for dimensions and notes, see Table 1).6 Figure 2 – Gauge pins for contact of socket connectors
(for dimensions, see Table 2).8 Figure 3 – Gauge for outer of socket connectors (for dimensions, see Table 3).9 Figure 4 – Female contact (for dimensions and notes, see Table 4).10 Figure 5 – Male contact (for dimensions and notes, see Table 5).12
Table 1 – Mating face dimensions.7 Table 2 – Gauges Dimensions.8 Table 3 – Gauge dimensions.10 Table 4 – Female contact dimensions.11 Table 5 – Male contact dimensions.12 Table 6 – Rating and characteristics.14 Table 7 – Acceptance tests.16 Table 8 – Periodic tests.17
61169-37 © IEC:2007(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
RADIO-FREQUENCY CONNECTORS –
Part 37: Sectional specification –
STWX8 R.F. connectors
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61169-37 has been prepared by subcommittee 46F: R.F. and microwave passive components, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories. The text of this standard is based on the following documents: CDV Report on voting 46F/44/CDV 46F/49/RVC
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
– 4 – 61169-37 © IEC:2007(E) A list of all parts of the IEC 61169 series, under the general title Radio frequency connectors, can be found on the IEC website. The QC numbers that appear on the front cover of this publication are the specification numbers in the IEC Quality Assessment System for Electronic Components (IECQ). The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed, • withdrawn, • replaced by a revised edition, or • amended. A bilingual version of this publication may be issued at a later date.
61169-37 © IEC:2007(E) – 5 –
RADIO-FREQUENCY CONNECTORS –
Part 37: Sectional specification –
STWX8 R.F. connectors
1 Scope
This part of IEC 61169, which is a Sectional Specification (SS), provides information and rules for the preparation of Detail Specifications (DS) for type STWX8 R.F. coaxial connectors with push-pull self-lock coupling.
The connectors are normally used with flexible and semi-rigid R.F. cables for middle power applications in conjunction with 50
cables in an operating frequency range up to 4 GHz. It describes the interface dimensions for general purpose grade 2 connectors, dimensional details for standard test connectors, grade 0, together with gauging information and the mandatory tests selected from QC 220000 (IEC 61169-1), applicable to all DS relating to type STWX8 connectors. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60096 (all parts), Radio-frequency cables IEC 61169-1:1992, Radio-frequency connectors – Part 1: Generic specification – General requirements and measuring methods
Amendment 1 (1996)
Amendment 2 (1997) 3 Mating face and gauge information
3.1 Dimensions - General connectors – Grade 2 (Figure 1) All dimensions are in mm. All un-dimensioned pictorial configurations are for reference purpose only.
– 6 – 61169-37 © IEC:2007(E)
Note 1JD F H C B A G E N P Note 1 Note1Note1U S I T X C Z W K 90° ± 10°
L MBB Q EE ∅Q MM A L MCC DD AA Note 1 Note 4 V Q RIEC
300/07
Figure 1 – Mating face of STWX8 connectors (for dimensions and notes, see Table 1)
61169-37 © IEC:2007(E) – 7 –
Table 1 – Mating face dimensions mm Reference min. max. Notes A 8,12 8,20 Diameter B 4,83, ----- Diameter C 2,06 2,21 Diameter D 4,0 -----
E 5,33 5,84
F ------ 0,18
G 4,5 ------
H ----- 0,18
I 8,22 8,28 Diameter J 6,90 7,00
K ------ 2,20
L 0,05 0,15 Radius M ------ 0,13 Radius N ------ 0,64 Diameter P 1,32 1,37 Diameter Q 0,19 0,25
R 0,00 0,30
S 7,05 ------
T ------ ------ Diameter (see Note 2) U 7,05 ------
V 6,00 ------
W 0,18 ------
X ------ 4,72- Diameter Z 0,18 ------
AA ------- ------ Diameter (see Note 3) BB 7,92 8,02 Diameter CC 1,22 1,42
DD 0,72 0,92
EE 1,10 Nominal NOTE 1 Reference plane: mechanical and electrical. NOTE 2 To meet electrical and mechanical requirements. NOTE 3 Bore diameter closed to meet electrical and mechanical requirements when mated with a 1,32/1,37 diameter. 3.2 Gauges for general purpose connectors - Grade 2 All dimensions are in mm. All undimensioned pictorial configurations are for reference purposes only.
– 8 – 61169-37 © IEC:2007(E) 3.2.1 Gauges for socket contact
4 mm (max.)3,17 mm (min.)50° ± 10° D C IEC
301/07
Figure 2 – Gauge pins for contact of socket connectors
(for dimensions, see Table 2)
Table 2 – Gauges Dimensions Gauge A- Maximum material for sizing purposes
Gauge B – Minimum material for measurement of gauge retention force Mass of gauge: (80 ± 1) g mm mm Reference min. max. min. max. D 1,370 1,375 1,315 1,320 C 0 0,64 ----- ------ Material: steel, polished. Surface roughness: Ra=0,4 m maximum.
Test procedure According to 9.3.4 of IEC 61169-1, the gauge A shall be inserted three times into the socket center contact. This is a sizing operation. After this, the gauge B shall be inserted into socket centre contact. The contact shall support the mass of the gauge in a vertical downward attitude. NOTE The minimum diameter of gauge A corresponds to the maximum diameter of a male contact.
61169-37 © IEC:2007(E) – 9 –
3.2.2 Gauges for female outer contact
Radius or allow chamfer 0,38 mm (max.) Jack connector center contact/insulator into the holeA J Reference planeIEC
302/07
(A) General dimensions
∅Q M MA90° ± 10° Reference plane Reference planeL M Q BB K L M DD Q CC IEC
303/07
(B) Alternative coupling grooves
Figure 3 – Gauge for outer of socket connectors (for dimensions, see Table 3)
– 10 – 61169-37 © IEC:2007(E) Table 3 – Gauge dimensions Gauge C-Maximum material for sizing purpose Gauge D-Minimum material for measurement of gauge retention force mm mm Reference min. max. min. max. A 8,185 8,20 8,12 8,135 J 7,05 7,15 7,05 7,15 K 1,1 1,1 Rad.L 0,05 0,15 0,05 0,15 RadM ---- 0,13 ----- 0,13 Q 0,2 0,25 0,15 0,20 BB 7,95 7,98 7,95 7,98 CC 1,2 1,4 1,1 1,3 DD 0,6 0,8 0,5 0,7 Material: polished steel. Surface roughness: Ra =0,4 µm max. Test procedure According to 9.3.4 of IEC 61169-1, the gauge C shall be placed three times inside the outer contact. This is a sizing operation. The gauge D is placed inside the outer contact.The retention force of the gauge shall be 15 N minimum. 3.3 Dimensions – standard test connectors – Grade 0 3.3.1 Socket (female contact)
Note 1J R D B Q A F H V C P Y Z Note 1 H EXWIEC
304/07
Figure 4 – Female contact (for dimensions and notes, see Table 4)
61169-37 © IEC:2007(E) – 11 –
Table 4 – Female contact dimensions mm Reference min. max. Notes A 8,22 8,25 Diameter B 4,67 4,72 see Note 3/Diameter C 2,16 2,18 see Note 4/Diameter D — — see Note 2/Diameter E 6 —
F 0,27 0,52
H 0,29 0,57
J 7,05 7,20
P 1,39 1,41 Diameter Q 7,78 7,82
R 0 0,30
V 2,13 2,18 Diameter W 4,62 4,88
X 6,05 6,10
Y 0,18 0,23
Z 0,15 0,25
NOTE 1 Reference plane: mechanical and electrical. NOTE 2 Diameter of outer conductor and length of uniform section of transmission line to give required characteristic impedance of 50Ω when checked using time domain reflectometer methods.
NOTE 3 Dimension for use of PTFE dielectric having a dielectric constant of 2,02. Use of PTFE is mandatory. NOTE 4 Bore diameter closed to meet electrical and mechanical requirements when mated with a 1,35/1,37 diameter.
– 12 – 61169-37 © IEC:2007(E) 3.3.2 Plug (male contact)
Note 1j f h r b a c d u Note 160° ± 1°e n p IEC
305/07 Figure 5 – Male contact (for dimensions and notes, see Table 5) Table 5 – Male contact dimensions mm Reference min. max. Notes a 8,15 8,20 Diameter b 4,88 4,93 see Note 3/Diameter c 2,13 2,18 see Note 2/Diameter d — — see Note 2/Diameter e
f 0,04 0,24
h — 0,09
j 6,95 7,00
n — 0,30
p 1,35 1,37 Diameter r 0 0,20 Diameter u 0,10 0,20
NOTE 1 Reference plane: mechanical and electrical. NOTE 2 Diameter of outer conductor and length of uniform section of transmission line to give required characteristic impedance of 50 when checked using time domain reflectometer methods.
NOTE 3 Dimension for use of PTFE dielectric having a dielectric constant of 2,02. Use of PTFE is mandatory.
61169-37 © IEC:2007(E) – 13 –
4 Quality assessment proced
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.