Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020)

This document, to be used together with ISO 4254-1, specifies the safety requirements and their
verification for the design and construction of mounted, semi-mounted, trailed and self-propelled
agricultural sprayers for use with plant protection products (PPP) and liquid fertilizer application,
as placed on the market by the manufacturer and designed for a single operator only. In addition, it
specifies the type of information on safe working practices (including residual risks) to be provided by
the manufacturer.
When requirements of this document are different from those which are stated in ISO 4254-1, the
requirements of this document take precedence over the requirements of ISO 4254-1 for machines that
have been designed and built according to the provisions of this document.
This document, taken together with ISO 4254-1, deals with significant hazards, hazardous situations
and events relevant to sprayers and liquid fertilizer distributors when they are used as intended and
under the conditions foreseeable by the manufacturer (see Annex A), excepting the hazards arising from:
— protection of the driver against spray when spraying (see Foreword);
— automatically actuated height adjustment systems;
— the environment, other than noise;
— moving parts for power transmission except strength requirements for guards and barriers.
This document is not applicable to sprayers and liquid fertilizer distributors which are manufactured
before the date of publication of this document.

Landmaschinen - Sicherheit - Teil 6: Pflanzenschutzgeräte (ISO 4254-6:2020)

Dieser Teil von ISO 4254, der zusammen mit ISO 4254 1 anzuwenden ist, legt die sicherheitstechnischen Anforderungen und deren Überprüfung für die Gestaltung und Konstruktion von angebauten, aufgesattelten, gezogenen und selbstfahrenden landwirtschaftlichen Pflanzenschutzgeräten zur Ausbringung von Pflanzenschutzmitteln (PPP, en: Plant Protection Products) und flüssigen Düngemitteln fest, die vom Hersteller auf den Markt gebracht werden und die für nur eine Bedienungsperson bestimmt sind. Zusätzlich legt dieser Teil von ISO 4254 fest, welche Informationen zu sicheren Arbeitsweisen (einschließlich Restrisiken) vom Hersteller zur Verfügung zu stellen sind.
Wenn die in diesem Teil von ISO 4254 festgelegten Anforderungen von den Anforderungen in ISO 4254 1 abweichen, haben im Falle von Maschinen, die entsprechend den Festlegungen dieses Teils der ISO 4254 konstruiert und gebaut wurden, die Anforderungen dieses Teils von ISO 4254 Vorrang vor den Festlegungen in ISO 4254 1.
Dieser Teil von ISO 4254 behandelt zusammen mit ISO 4254 1 die signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die für Pflanzenschutzgeräte und Geräte zum Ausbringen von flüssigen Düngemitteln, die bestimmungsgemäß und unter den vom Hersteller vorgesehenen Bedingungen eingesetzt werden, relevant sind (siehe Anhang A), mit der Ausnahme von Gefährdungen durch:
—   automatisch funktionierende Systeme zur Höheneinstellung;
—   die Umwelt, mit Ausnahme von Geräuschen;
ANMERKUNG   Siehe ISO 16119 für umweltbezogene Gefährdungen.
—   bewegliche Teile der Kraftübertragung, mit Ausnahme der Festigkeitsanforderungen an trennende Schutzeinrichtungen und Abweisbügel.
Dieser Teil von ISO 4254 gilt nicht für Pflanzenschutzgeräte und Geräte zum Ausbringen von flüssigen Düngemitteln, die vor dem Datum der Veröffentlichung dieses Dokuments durch ISO hergestellt wurden.

Matériel agricole - Sécurité - Partie 6: Pulvérisateurs et distributeurs d'engrais liquides (ISO 4254-6:2020)

Le présent document, à utiliser conjointement avec l'ISO 4254-1, spécifie les exigences de sécurité et leur vérification pour la conception et la construction de pulvérisateurs agricoles portés, semi-portés, traînés et automoteurs destinés à appliquer des produits de protection des plantes et des engrais liquides, à leur mise en marché par le constructeur et conçus pour un seul opérateur. En outre, elle spécifie le type d'informations que le fabricant doit fournir sur les pratiques d'utilisation sûre (y compris les risques résiduels).
Lorsque des exigences du présent document diffèrent de celles de l'ISO 4254-1, les exigences du présent document prennent le pas sur les exigences de l'ISO 4254-1 pour les machines conçues et fabriquées conformément aux exigences du présent document.
Le présent document, pris avec l'ISO 4254-1, traite de tous les phénomènes dangereux, situations dangereuses et événements dangereux significatifs relatifs aux pulvérisateurs et distributeurs d'engrais liquides, lorsqu'ils sont utilisés normalement et dans les conditions prévisibles par le fabricant (voir l'Annexe A), à l'exception des phénomènes dangereux provenant:
—          de la protection du conducteur contre le produit lors de sa pulvérisation (voir l'Avant-propos);
—          des systèmes de contrôle automatique de la hauteur;
—          de l'environnement, autres que le bruit;
—          des éléments mobiles de transmission de puissance, à l'exception des exigences de résistance des protecteurs et barres d'éloignement.
Le présent document ne s'applique pas aux pulvérisateurs et aux distributeurs d'engrais liquides qui ont été fabriqués avant la date de publication du présent document.

Kmetijski stroji - Varnost - 6. del: Škropilnice in naprave za razdeljevanje tekočih gnojil (ISO 4254-6:2020)

Ta dokument, ki se uporablja skupaj s standardom ISO 4254-1, določa varnostne zahteve in njihovo
preverjanje za načrtovanje in izdelavo priklopnih, polpriklopnih, vlečenih in samognanih
kmetijskih škropilnic za uporabo z izdelki za zaščito rastlin (PPP) in za aplikacije tekočih gnojil,
kakršne da na tržišče proizvajalec in ki so zasnovane za enega upravljavca. Poleg tega
določa tudi vrsto informacij o varnih delovnih praksah (vključno z ostalimi tveganji), ki jih mora zagotoviti
proizvajalec.
Če se zahteve tega dokumenta razlikujejo od zahtev, navedenih v standardu ISO 4254-1,
imajo zahteve tega dokumenta prednost pred zahtevami standarda ISO 4254-1 za stroje, ki
so zasnovani in izdelani v skladu z določbami tega dokumenta.
Ta dokument skupaj s standardom ISO 4254-1 obravnava večja tveganja, nevarne situacije
in dogodke, ki se navezujejo na škropilnice in naprave za razdeljevanje tekočih gnojil, kadar se uporabljajo v skladu z njihovim namenom in
pod pogoji, ki jih določa proizvajalec (glej dodatek A), razen tveganj, povezanih s/z:
– zaščito voznika pred škropivom med škropljenjem (glej predgovor);
– sistemi za nastavitev višine, ki se aktivirajo samodejno;
– okoljem (razen hrupa);
– premikajočimi se deli menjalnika (razen zahtev glede trdnosti ščitnikov in pregrad).
Ta dokument se ne uporablja za škropilnike in naprave za razdeljevanje tekočih gnojil, izdelane
pred datumom njegove objave.

General Information

Status
Published
Public Enquiry End Date
30-Jun-2017
Publication Date
28-May-2020
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
28-May-2020
Due Date
02-Aug-2020
Completion Date
29-May-2020

Relations

Buy Standard

Standard
EN ISO 4254-6:2020
English language
36 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 4254-6:2017
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4254-6:2020
01-julij-2020
Nadomešča:
SIST EN ISO 4254-6:2010
SIST EN ISO 4254-6:2010/AC:2011
Kmetijski stroji - Varnost - 6. del: Škropilnice in naprave za razdeljevanje tekočih
gnojil (ISO 4254-6:2020)
Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO
4254-6:2020)
Landmaschinen - Sicherheit - Teil 6: Pflanzenschutzgeräte (ISO 4254-6:2020)
Matériel agricole - Sécurité - Partie 6: Pulvérisateurs et distributeurs d'engrais liquides
(ISO 4254-6:2020)
Ta slovenski standard je istoveten z: EN ISO 4254-6:2020
ICS:
65.060.40 Oprema za nego rastlin Plant care equipment
SIST EN ISO 4254-6:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 4254-6:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 4254-6:2020


EN ISO 4254-6
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2020
EUROPÄISCHE NORM
ICS 65.060.40 Supersedes EN ISO 4254-6:2009
English Version

Agricultural machinery - Safety - Part 6: Sprayers and
liquid fertilizer distributors (ISO 4254-6:2020)
Matériel agricole - Sécurité - Partie 6: Pulvérisateurs et Landmaschinen - Sicherheit - Teil 6:
distributeurs d'engrais liquides (ISO 4254-6:2020) Pflanzenschutzgeräte (ISO 4254-6:2020)
This European Standard was approved by CEN on 16 February 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4254-6:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 4254-6:2020
EN ISO 4254-6:2020 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC aimed to be covered . 5

2

---------------------- Page: 4 ----------------------
SIST EN ISO 4254-6:2020
EN ISO 4254-6:2020 (E)
European foreword
This document (EN ISO 4254-6:2020) has been prepared by Technical Committee ISO/TC 23 "Tractors
and machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144
“Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2020, and conflicting national standards
shall be withdrawn at the latest by May 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4254-6:2009.
The main changes compared to the previous edition are as follows:
— some excluded hazards have been deleted from the scope as they are covered by ISO 4254-1 or this
revised edition;
— the general (stability) requirements have been deleted as they are covered by ISO 4254-1;
— the protection of the operator against hazardous substances in case of front mounted booms has
been removed as this risk is relevant to all types of sprayers but appropriate requirements (in form
of an international reference standard) are not yet available; however, the protection of the driver
against spray when spraying is dealt with by the harmonized European standard EN 15695
(Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against
hazardous substances - Part 1: Cab classification, requirements and test procedures and Part 2:
Filters, requirements and test procedures) which is listed in the EU Official Journal under the
Machinery Directive 2006/42EU;
— in 4.6.2, the requirements for chemical inductions bowls have been amended to cover foldable
devices;
— in 4.7, requirements for protecting the operator in case of leakages have been added;
— a new subclause (4.12) to deal with the storage of personal protective equipment has been added;
— Clause 6 has been aligned with ISO 4254-1.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
3

---------------------- Page: 5 ----------------------
SIST EN ISO 4254-6:2020
EN ISO 4254-6:2020 (E)
Endorsement notice
The text of ISO 4254-6:2020 has been approved by CEN as EN ISO 4254-6:2020 without any
modification.

4

---------------------- Page: 6 ----------------------
SIST EN ISO 4254-6:2020
EN ISO 4254-6:2020 (E)
Annex ZA
(informative)

Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC aimed to be covered
This European Standard has been prepared under a Commission’s standardization request "M/396
mandate to CEN and CENELEC for standardisation in the field of machinery" to provide one voluntary
means of conforming to essential requirements of the Directive 2006/42/EC of the European
Parliament and of the Council of 17 May 2006 on machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding Essential
Requirements, of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex 1 of Directive
2006/42/EC
Essential Requirements of EU Clause(s)/sub-clause(s)
Remarks/Notes
Directive 2006/42/EC of this EN
1. ESSENTIAL HEALTH AND
SAFETY REQUIREMENTS
1.1.2.  Principles of safety 4.1
integration
1.1.3.  Materials and products 4.1; 4.5.2; 4.5.3; 4.5.4; 4.9; 4.11;
4.14
1.1.4.  Lighting 4.1
1.1.5.  Design of machinery to 4.1; 4.3; 4.4; 4.5; 4.10; 4.13; 4.14
facilitate its handling
1.1.6.  Ergonomics 4.1; 4.4; 4.13
1.1.7.  Operating positions 4.1 Except for the prevention of
exposure of the operator to spray
liquid while spraying.
1.1.8.  Seating 4.1
1.2. CONTROL SYSTEMS
1.2.1.  Safety and reliability of 4.1; 4.4
control systems
1.2.2.  Control devices 4.3; 4.5.2.2; 4.5.4; 4.10
1.2.3.  Starting 4.1
1.2.4.  Stopping 4.1; 4.10
1.2.4.1.  Normal stop 4.1; 4.10
1.2.4.2.  Operational stop 4.1
5

---------------------- Page: 7 ----------------------
SIST EN ISO 4254-6:2020
EN ISO 4254-6:2020 (E)
1.2.4.3.  Emergency stop 4.1
1.2.4.4.  Assembly of machinery 4.1; 4.13
1.2.5.  Selection of control or 4.1
operating modes
1.2.6.  Failure of the power 4.1; 4.4.2
supply
1.3. PROTECTION AGAINST
MECHANICAL HAZARDS
1.3.1.  Risk of loss of stability 4.1; 4.2
1.3.2.  Risk of break-up during 4.1; 4.2; 4.8
operation
1.3.3.  Risks due to falling or 4.4; 4.8
ejected objects
1.3.4.  Risks due to surfaces, 4.1
edges or angles
1.3.5.  Risks related to combined Not relevant
machinery
1.3.6.  Risks related to variations 4.1
in operating conditions
1.3.7.  Risks related to moving 4.1; 4.8
parts
1.3.8.  Choice of protection Not relevant
against risks arising from moving
parts
1.3.8.1.  Moving transmission Not relevant
parts
1.3.8.2.  Moving parts involved in Not relevant
the process
1.3.9.  Risks of uncontrolled Not relevant
movements
1.4. REQUIRED
CHARACTERISTICS OF GUARDS
AND PROTECTIVE DEVICES
1.4.1.  General requirements Not relevant
1.4.2.1.  Fixed guards Not relevant
1.4.2.2.  Interlocking movable Not relevant
guards
1.4.2.3.  Adjustable guards Not relevant
restricting access
1.4.3.  Special requirements for Not relevant
protective devices
6

---------------------- Page: 8 ----------------------
SIST EN ISO 4254-6:2020
EN ISO 4254-6:2020 (E)
1.5. RISKS DUE TO OTHER
HAZARDS
1.5.1.  Electricity supply 4.1
1.5.2.  Static electricity 4.1
1.5.3.  Energy supply other than 4.1
electricity
1.5.4.  Errors of fitting Clause 6
1.5.5.  Extreme temperatures 4.1
1.5.6.  Fire 4.1
1.5.7.  Explosion 4.1
1.5.8.  Noise 4.1; 4.15
1.5.9.  Vibrations 4.1
1.5.10.  Radiation 4.1
1.5.11.  External radiation 4.1
1.5.12.  Laser radiation Not relevant
1.5.13.  Emissions of hazardous 4.5; 4.7; 4.9; 4.11 Except for the prevention of
materials and substances exposure of the operator to spray
liquid while spraying.
1.5.14.  Risk of being trapped in a 4.5.1
machine
1.5.15.  Risk of slipping, tripping 4.1
or falling
1.5.16.  Lightning 4.1
1.6. MAINTENANCE
1.6.1.  Machinery maintenance 4.1; 4.14
1.6.2.  Access to operating 4.1
positions and servicing points
1.6.3.  Isolation of energy 4.1
sources
1.6.4.  Operator intervention 4.1
1.6.5.  Cleaning of internal parts 4.1
1.7. INFORMATION
1.7.1.  Information and warnings Clause 6
on the machinery
1.7.1.1.  Information and 4.1; Clause 6
information devices
1.7.1.2.  Warning devices 4.1
1.7.2.  Warning of residual risks 4.1; Clause 6
7

---------------------- Page: 9 ----------------------
SIST EN ISO 4254-6:2020
EN ISO 4254-6:2020 (E)
1.7.3.  Marking of machinery 4.1; 6.2
1.7.4.  Instructions Clause 6
1.7.4.1.  General principles for 4.1; Clause 6
the drafting of instructions
1.7.4.2.  Contents of the 4.1; Clause 6
instructions
1.7.4.3.  Sales literature 4.1
2. SUPPLEMENTARY ESSENTIAL
HEALTH AND SAFETY
REQUIREMENTS FOR CERTAIN
CATEGORIES OF MACHINERY
2.1.  FOODSTUFFS MACHINERY Not relevant
AND MACHINERY FOR
COSMETICS OR
PHARMACEUTICAL PRODUCTS
2.2.  PORTABLE HAND-HELD Not relevant
AND/OR HAND-GUIDED
MACHINERY
2.2.1.  General Not relevant
2.2.1.1.  Instructions Not relevant
2.2.2.  Portable fixing and other Not relevant
impact machinery
2.2.2.1.  General Not relevant
2.2.2.2.  Instructions Not relevant
2.3.  MACHINERY FOR WORKING Not relevant
WOOD AND MATERIAL WITH
SIMILAR PHYSICAL
CHARACTERISTICS
2.4.  MACHINERY FOR
PESTICIDE APPLICATION
2.4.2.  General 4.1; 4.5.3; 4.5.4; 4.7; 4.9; 4.10
2.4.3.  Controls and monitoring 4.3; 4.4.2; 4.6; 4.10
2.4.4.  Filling and emptying 4.5.3; 4.5.4
2.4.5.  Applications of pesticides Not relevant
2.4.5.1.  Application rate Not relevant
2.4.5.2.  Distribution, deposition Not relevant
and drift of pesticide
2.4.5.3.  Tests Not relevant
2.4.5.4.  Losses during stoppage 4.10
2.4.6.  Maintenance 4.14
8

---------------------- Page: 10 ----------------------
SIST EN ISO 4254-6:2020
EN ISO 4254-6:2020 (E)
2.4.6.1.  Cleaning Not relevant
2.4.6.2.  Servicing 4.14
2.4.7.  Inspections Not relevant
2.4.8.  Marking of nozzles, Not relevant
strainers and filters
2.4.9.  Indication of pesticide in Not relevant
use
2.4.10.  Instructions Not relevant
3.  SUPPLEMENTARY
ESSENTIAL HEALTH AND
SAFETY REQUIREMENTS TO
OFFSET HAZARDS DUE TO THE
MOBILITY OF MACHINERY
3.1. GENERAL 4.1
3.2. WORK POSITIONS
3.2.1.  Driving positions 4.1
3.2.2.  Seating 4.1
3.2.3.  Positions for other 4.1
persons
3.3. CONTROL SYSTEMS
3.3.1.  Control devices 4.1
3.3.2.  Starting/moving 4.1
3.3.3.  Travelling function 4.1
3.3.4.  Movement of pedestrian- Not relevant
controlled machinery
3.3.5.  Control circuit failure 4.1
3.4. PROTECTION AGAINST
MECHANICAL HAZARDS
3.4.1.  Uncontrolled movements 4.1
3.4.2.  Moving transmission parts 4.1
3.4.3.  Roll-over and tip-over 4.2
3.4.4.  Falling objects Not relevant
3.4.5.  Means of access 4.1
3.4.6.  Towing devices 4.1
3.4.7.  Transmission of power 4.1
between self-propelled
machinery (or tractor) and
recipient machinery
3.5. PROTECTION AGAINST
9

---------------------- Page: 11 ----------------------
SIST EN ISO 4254-6:2020
EN ISO 4254-6:2020 (E)
OTHER HAZARDS
3.5.1.  Batteries 4.1
3.5.2.  Fire 4.1
3.5.3.  Emissions of hazardous The exposure of the operator to
substances spray liquid while spraying is
limited to information for use to
be provided in the operator's
manual.
3.6. INFORMATION AND
INDICATIONS
3.6.1.  Signs, signals and 4.1; Clause 6
warnings
3.6.2.  Marking 4.1; Clause 6
3.6.3.  Instructions 4.1; Clause 6
3.6.3.1.  Vibrations 4.1
3.6.3.2. Multiple uses Clause 6
4.  SUPPLEMENTARY Not relevant
ESSENTIAL HEALTH AND
SAFETY REQUIREMENTS TO
OFFSET HAZARDS DUE TO
LIFTING OPERATIONS
4.1.  GENERAL Not relevant
4.1.1.  Definitions Not relevant
4.1.2.  Protection against Not relevant
mechanical hazards
4.1.2.1.  Risks due to lack of Not relevant
stability
4.1.2.2.  Machinery running on Not relevant
guide rails and rail tracks
4.1.2.3.  Mechanical strength Not relevant
4.1.2.4.  Pulleys, drums, wheels, Not relevant
ropes and chains
4.1.2.5.  Lifting accessories and Not relevant
their components
4.1.2.6.  Control of movements Not relevant
4.1.2.7.  Movements of loads Not relevant
during handling
4.1.2.8.  Machinery serving fixed Not relevant
landings
4.1.2.8.1.  Movements of the Not relevant
carrier
10

---------------------- Page: 12 ----------------------
SIST EN ISO 4254-6:2020
EN ISO 4254-6:2020 (E)
4.1.2.8.2.  Access to the carrier Not relevant
4.1.2.8.3.  Risks due to contact Not relevant
with the moving carrier
4.1.2.8.4.  Risk due to the load Not relevant
falling off the carrier
4.1.2.8.5.  Landings Not relevant
4.2.  REQUIREMENTS FOR Not relevant
MACHINERY WHOSE POWER
SOURCE IS OTHER THAN
MANUAL EFFORT
4.2.1.  Control of movements Not relevant
4.2.2.  Loading control Not relevant
4.2.3.  Installations guided by Not relevant
ropes
4.3.  INFORMATION AND Not relevant
MARKINGS
4.3.1.  Chains, ropes and webbing Not relevant
4.3.2.  Lifting accessories Not relevant
4.3.3.  Lifting machinery Not relevant
4.4.  INSTRUCTIONS Not relevant
4.4.1.  Lifting accessories Not relevant
4.4.2.  Lifting machinery Not relevant
5.  SUPPLEMENTARY Not relevant
ESSENTIAL HEALTH AND
SAFETY REQUIREMENTS FOR
MACHINERY INTENDED FOR
UNDERGROUND WORK
5.1.  RISKS DUE TO LACK OF Not relevant
STABILITY
5.2.  MOVEMENT Not relevant
5.3.  CONTROL DEVICES Not relevant
5.4.  STOPPING Not relevant
5.5.  FIRE Not relevant
5.6.  EXHAUST EMISSIONS Not relevant
6.  SUPPLEMENTARY Not relevant
ESSENTIAL HEALTH AND
SAFETY REQUIREMENTS FOR
MACHINERY PRESENTING
PARTICULAR HAZARDS DUE TO
THE LIFTING OF PERSONS

11

---------------------- Page: 13 ----------------------
SIST EN ISO 4254-6:2020
EN ISO 4254-6:2020 (E)
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.

12

---------------------- Page: 14 ----------------------
SIST EN ISO 4254-6:2020
INTERNATIONAL ISO
STANDARD 4254-6
Third edition
2020-04
Agricultural machinery — Safety —
Part 6:
Sprayers and liquid fertilizer
distributors
Matériel agricole — Sécurité —
Partie 6: Pulvérisateurs et distributeurs d'engrais liquides
Reference number
ISO 4254-6:2020(E)
©
ISO 2020

---------------------- Page: 15 ----------------------
SIST EN ISO 4254-6:2020
ISO 4254-6:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 16 ----------------------
SIST EN ISO 4254-6:2020
ISO 4254-6:2020(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Safety requirements and/or protective measures . 2
4.1 General . 2
4.2 Stability of machines fitted with rollers for manual handling when dismounted . 2
4.3 Spray boom folding . 2
4.4 Adjustment of spray boom height . 2
4.4.1 Manual height adjustment . 2
4.4.2 Powered height adjustment . 3
4.5 Spray tank . 3
4.5.1 Prevention of whole-body access to the tank . 3
4.5.2 Limitation of contact with chemicals . 3
4.5.3 Prevention of spillage and overflow. 4
4.5.4 Protection from contact with spray mixture when draining . 4
4.6 Pressure indicator (manometer). 5
4.7 Protection against overpressure . 5
4.8 Fan for air-assistance . 5
4.9 Spray liquid carrying hoses . 6
4.10 Spraying stop control . 6
4.11 Clean water tank . 6
4.12 Storage of personal protective equipment . 6
4.13 Hitching and clearance zone . 6
4.14 Servicing and maintenance . 7
4.15 Noise reduction at the design stage . 7
5 Verification of the safety requirements and/or protective measures .7
6 Information for use . 9
6.1 Operator's manual . 9
6.2 Marking .10
6.2.1 General.10
6.2.2 Sprayers .10
6.2.3 Product pump .10
Annex A (informative) List of significant hazards.12
Bibliography .19
© ISO 2020 – All rights reserved iii

---------------------- Page: 17 ----------------------
SIST EN ISO 4254-6:2020
ISO 4254-6:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html
This document was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture
and forestry, Subcommittee SC 6, Equipment for crop protection, in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 144, Tractors and machinery for
agriculture and forestry, in accordance with the Agreement on technical cooperation between ISO and
CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 4254-6:2009), which has been technically
revised and contains the following changes:
— some excluded hazards have been deleted from the scope as they are covered by ISO 4254-1 or this
revised edition;
— the general (stability) requirements have been deleted as they are covered by ISO 4254-1;
— the protection of the operator against hazardous substances in case of front mounted booms has
been removed as this risk is relevant to all types of sprayers but appropriate requirements (in form
of an international reference standard) are not yet available;
— in 4.5.2, the requirements for chemical inductions bowls have been amended to cover foldable
devices;
— in 4.7, requirements for protecting the operator in case of leakages have been added;
— a new subclause (4.12) to deal with the storage of personal protective equipment has been added;
— Clause 6 has been aligned with ISO 4254-1.
A list of all parts in the ISO 4254 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved

---------------------- Page: 18 ----------------------
SIST EN ISO 4254-6:2020
ISO 4254-6:2020(E)

Introduction
The structure of safety standards in the field of machinery is as follows:
a) type-A standards (basic standards) give basic concepts, principles for design, and general aspects
that can be applied to machinery;
b) type-B standards (generic safety standards) deal with one safety aspect or one type of safeguards
that can be used across a wide range of machinery:
— type-B1 standards on particular safety aspects (e.g. safety distances, surface temperature, noise),
— type-B2 standards on safeguards (e.g. two-hand controls, interlocking devices, pressure
sensitive devices, guards);
c) type-C standards (machinery safety standards) deal with detailed safety requirements for a
particular machine or group of machines.
This document is a type-C standard as stated in ISO 12100.
This document is of relevance, in particular, for the following stakeholder groups representing the
market players with regard t
...

SLOVENSKI STANDARD
oSIST prEN ISO 4254-6:2017
01-junij-2017
.PHWLMVNLVWURML9DUQRVWGHOâNURSLOQLFHLQQDSUDYH]DUD]GHOMHYDQMHWHNRþLK
JQRMLO ,62',6
Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors
(ISO/DIS 4254-6:2017)
Landmaschinen - Sicherheit - Teil 6: Pflanzenschutzgeräte (ISO/DIS 4254-6:2017)
Matériel agricole - Sécurité - Partie 6: Pulvérisateurs et distributeurs d'engrais liquides
(ISO/DIS 4254-6:2017)
Ta slovenski standard je istoveten z: prEN ISO 4254-6
ICS:
65.060.40 Oprema za nego rastlin Plant care equipment
oSIST prEN ISO 4254-6:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 4254-6:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 4254-6:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4254-6
ISO/TC 23/SC 6 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2017-04-20 2017-07-12
Agricultural machinery — Safety —
Part 6:
Sprayers and liquid fertilizer distributors
Matériel agricole — Sécurité —
Partie 6: Pulvérisateurs et distributeurs d’engrais liquides
ICS: 65.060.40
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 4254-6:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 4254-6:2017
ISO/DIS 4254-6:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 4254-6:2017
ISO/DIS 4254-6:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Safety requirements and/or protective measures . 2
4.1 General . 2
4.2 Stability of machines fitted with rollers for manual handling when dismounted . 2
4.3 Protection against spray . 2
4.4 Spray boom folding . 2
4.5 Adjustment of spray boom height . 3
4.6 Spray tank . 3
4.6.1 Prevention of whole‑body access to the tank . 3
4.6.2 Limitation of contact with chemicals . 3
4.6.3 Prevention of spillage and overflow. 4
4.6.4 Protection from contact with spray mixture when draining . 5
4.7 Pressure indicator (manometer). 5
4.8 Protection against overpressure . 5
4.9 Product fan . 6
4.10 Spray liquid carrying hoses . 6
4.11 Spraying stop control . 6
4.12 Clean water tank . 6
4.13 Storage of personal protective equipment . 6
4.14 Hitching and clearance zone . 6
4.15 Servicing and maintenance . 7
4.16 Platforms other than operator platforms . 7
4.17 Noise reduction at the design stage . 8
5 Verification of the safety requirements and/or protective measures .8
6 Information for use . 9
6.1 Operator’s manual. 9
6.2 Marking .10
6.2.1 General.10
6.2.2 Sprayers .10
6.2.3 Plant protection product pump.11
6.2.4 Plant protection product hoses .11
Annex A (informative) List of significant hazards.12
Annex ZA (informative) .21
Bibliography .22
© ISO 2017 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 4254-6:2017
ISO/DIS 4254-6:2017(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non‑governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4254‑6 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture
and forestry, Subcommittee SC 6 and by Technical Committee CEN/TC 144, Tractors and machinery for
agriculture and forestry in collaboration.
This third edition cancels and replaces the second edition ISO 4254‑6:2009, which has been technically
revised and contains the following changes:
Compared with the second edition (2009) the following modifications were made
— 1 Scope: some excluded hazards were deleted as they are covered by ISO 4254‑1 or this revised
edition;
— 4.2.1 General (stability) was deleted as covered by ISO 4254‑1;
— 4.4 (protection of the operator against hazardous substances in case of front mounted booms) was
modified to allow the application to all types of sprayers;
— 4.5.2: the requirements for chemical inductions bowls were amended to cover foldable devices;
— 4.6 Pressure indicators: requirements for protecting the operator in case of leakages were added;
— New 6.6.2.3 to refer to closed transfer systems;
— New 4.12 to deal with the storage of personal protective equipment;
A list of all parts in the ISO 4254- series, published under the general title Agricultural machinery —
Safety, can be found on the ISO website.
iv © ISO 2017 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 4254-6:2017
ISO/DIS 4254-6:2017(E)

Introduction
The structure of safety standards in the field of machinery is as follows:
a) type‑A standards (basic standards) giving basic concepts, principles for design, and general aspects
that can be applied to machinery;
b) type‑B standards (generic safety standards) dealing with one safety aspect or one type of
safeguards that can be used across a wide range of machinery:
— type‑B1 standards on particular safety aspects (e.g. safety distances, surface temperature, noise),
— type‑B2 standards on safeguards (e.g. two‑hand control devices, interlocking devices, pressure
sensitive devices, guards);
c) type‑C standards (machinery safety standards) dealing with detailed safety requirements for a
particular machine or group of machines.
This document is a type‑C standard as stated in ISO 12100.
When requirements of this type‑C standard are different from those which are stated in type‑A or B
standards, the requirements of this type‑C standard take precedence over the requirements of the
other standards for machines that have been designed and built according to the requirements of this
type‑C standard.
The machinery concerned and the extent to which hazards, hazardous situations and events are
covered are indicated in the scope of this part of ISO 4254. These hazards are specific to sprayers and
liquid fertilizer distributors.
Significant hazards that are common to all the agricultural machines (self‑propelled, mounted, semi‑
mounted and trailed) are dealt with in ISO 4254-1.
© ISO 2017 – All rights reserved v

---------------------- Page: 7 ----------------------
oSIST prEN ISO 4254-6:2017

---------------------- Page: 8 ----------------------
oSIST prEN ISO 4254-6:2017
DRAFT INTERNATIONAL STANDARD ISO/DIS 4254-6:2017(E)
Agricultural machinery — Safety —
Part 6:
Sprayers and liquid fertilizer distributors
1 Scope
This part of ISO 4254, to be used together with ISO 4254‑1, specifies the safety requirements and their
verification for the design and construction of mounted, semi‑mounted, trailed and self‑propelled
agricultural sprayers for use with Plant Protection Products (PPP) and liquid fertilizer application,
as placed on the market by the manufacturer and designed for a single operator only. In addition, it
specifies the type of information on safe working practices (including residual risks) to be provided by
the manufacturer.
When requirements of this part of ISO 4254 are different from those which are stated in ISO 4254-1,
the requirements of this part of ISO 4254 take precedence over the requirements of ISO 4254‑1 for
machines that have been designed and built according the provisions of this part of ISO 4254.
This part of ISO 4254, taken together with ISO 4254‑1, deals with significant hazards, hazardous
situations and events relevant to sprayers and liquid fertilizer distributors when they are used as
intended and under the conditions foreseen by the manufacturer (see Annex A), excepting the hazards
arising from:
— automatically actuated height adjustment systems;
— the environment, other than noise;
NOTE For environment related hazards, see ISO 16119.
— moving parts for power transmission except strength requirements for guards and barriers;
This part of ISO 4254 is not applicable to sprayers and liquid fertilizer distributors which are
manufactured before the date of publication of this document by ISO.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 4254-1:2013, Agricultural machinery — Safety — Part 1: General requirements
ISO 5353:1995, Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat
index point
ISO 5681, Equipment for crop protection — Vocabulary
ISO 12100:2010, Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 13857:2008, Safety of machinery — Safety distances to prevent hazard zones being reached by upper
and lower limbs
ISO 16119-2:2013, Agricultural and forestry machinery — Environmental requirements for sprayers —
Part 2: Horizontal boom sprayers
© ISO 2017 – All rights reserved 1

---------------------- Page: 9 ----------------------
oSIST prEN ISO 4254-6:2017
ISO/DIS 4254-6:2017(E)

ISO 16119-3:2013, Agricultural and forestry machinery — Environmental requirements for sprayers —
Part 3: Sprayers for bush and tree crops
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 4254‑1, ISO 5681 and
ISO 12100 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http:// www .electropedia .org/
— ISO Online browsing platform: available at http:// www .iso .org/ obp
4 Safety requirements and/or protective measures
4.1 General
4.1.1 Machinery shall comply with the safety requirements and/or protective measures of this clause.
In addition, the machine shall be designed according to the principles of ISO 12100 for hazards relevant,
but not significant, which are not dealt with by this part of ISO 4254.
The compliance with the safety requirements and/or measures shall be verified in accordance with
Clause 5.
4.1.2 Unless otherwise specified in this part of ISO 4254, the machine shall comply with the
requirements of ISO 4254-1.
4.1.3 The machine shall allow for handling and operating, including filling and maintenance, by an
operator wearing adequate personal protective equipment as recommended in 6.1 g).
4.2 Stability of machines fitted with rollers for manual handling when dismounted
Machines equipped with transport rollers for manual handling when dismounted shall be designed to
minimize the risk of tipping over (see clause 5).
4.3 Protection against spray
In order to protect the operator from spray, the sprayer design should allow the use of protective
measures specified by the label of the product to be applied (e.g. protection by operator cabin or
personal protective equipment).
4.4 Spray boom folding
4.4.1 To limit the risk associated with overhead power lines during work, the booms shall be capable
of folding and unfolding without exceeding a height of 4 m. See also (6.1 d) and 6.1 e)).
This requirement does not apply during release of the folded boom from the transport position, nor
during positioning of the folded boom into the transport position.
2 © ISO 2017 – All rights reserved

---------------------- Page: 10 ----------------------
oSIST prEN ISO 4254-6:2017
ISO/DIS 4254-6:2017(E)

4.4.2 Booms that can be manually folded/unfolded shall be fitted with two handles located at a
distance of at least 300 mm from the nearest articulation. These handles may be integral parts of the
boom, provided they are ergonomically designed and clearly identified.
In the case of powered folding/unfolding operation, the control shall be of the hold‑to‑run type and the
manual control shall be located outside the swiveling zone.
A device shall be provided to prevent the boom from moving when it is in the transport position. If
this locking device is a hydraulic valve not directly fitted to the cylinder, the lines connecting the valve
to the cylinder shall be designed to withstand a pressure of at least four times the rated maximum
hydraulic pressure. See also (7.1 d)). The unlocking and the unfolding of booms shall be controlled by
means of separate actions by the operator.
4.5 Adjustment of spray boom height
The manual force necessary to adjust the height of the boom shall not exceed 250 N.
Where height adjustment is by a mechanical device, this device shall be self‑arresting and able to deal
with a nominal load equal to at least 1,3 times the weight of the boom.
This mechanical device shall be operable from the ground or from a platform as specified in
ISO 4254-1:2013, 4.7.2.
In the case of powered height adjustment systems that are manually actuated, it shall be possible to
actuate the manual control from the driver’s position and the control shall be of the hold‑to‑run type.
In the case of powered height adjustment systems that are automatically actuated, it shall be possible to
override the system from the driver’s position.
To ensure the protection of the operator against crushing and shearing hazards related to a failure of
the control circuit of the height adjustment of the boom, the machine shall be fitted for those purposes
with either
-1
a) a device which limits the maximum downward speed of the boom to 10 mm⋅s (measured at the
centreline of the machine) during a hydraulic failure, or
b) a device capable of stopping the boom lowering at a minimum height of 500 mm between the boom
and the ground.
For b), in those cases where the height needs to be reduced to less than 500 mm, a safety device shall
prevent any lowering beneath the chosen height, and it shall only be possible to reduce the height by
means of an intentional and separate action.
If these safety devices are hydraulic valves not directly fitted to the cylinder, the lines connecting the
valve to the cylinder shall be designed to withstand a pressure of at least four times the rated maximum
hydraulic pressure.
4.6 Spray tank
4.6.1 Prevention of whole-body access to the tank
To limit the risk of access into the tank, any tank opening greater than 400 mm in diameter — or, if
it is rectangular, of more than 400 mm × 300 mm — shall be provided with a grating which can only
be removed by the use of tools. The openings in the grating shall not exceed the above‑mentioned
dimensions. See also 6.1 g) and 6.2.2.
4.6.2 Limitation of contact with chemicals
To limit the risk of exposure to chemicals during filling/cleaning operations 4.6.2.1, 4.6.2.2 or 4.6.2.3
shall be applied.
© ISO 2017 – All rights reserved 3

---------------------- Page: 11 ----------------------
oSIST prEN ISO 4254-6:2017
ISO/DIS 4254-6:2017(E)

4.6.2.1 Chemical induction bowls which are folded/unfolded manually shall be provided with a handle
and locking mechanism for folding/unfolding that can be actuated without presenting a risk to the
operator during operation. The handle can be integral part of the chemical induction bowl provided it is
suitably designed and clearly identified.
Power-assisted chemical induction bowls shall be able to be operated from a position that prevents
the operator contacting the folding induction bowl while operating the folding control. The folding
control shall be a hold-to-run control. The unintended unfolding of the chemical induction bowl during
transport shall be prevented by a suitable means.
Actuation of the PPP container rinsing device shall be operated by a hold‑to‑run control, the purpose
of which is to prevent operation of the rinsing device unless a PPP container is correctly positioned on
the device, prevents the discharge of liquid onto the operator and all liquid released is directed into the
induction system, no liquid shall be ejected outside of the induction system.
4.6.2.2 The filling hole of the spray tank shall be so positioned that the height from the ground or
platform is not more than 1 300 mm, with the horizontal reach between the rim of the hole and the outer
edge of any part of the sprayer which could hinder the operator being not more than 300 mm at the
operator filling position (see Figure 1).
4.6.2.3 In case of liquid PPP, the sprayer shall be equipped with a means for introducing PPP’s that
control the risk of chemical contact and inhalation when dispensing PPP’s and when cleaning the PPP
container (see e.g. closed transfer systems).
NOTE A closed transfer systems standard is under development.
Dimensions in millimetres
Key
1 operator filling position
Figure 1 — Maximum reach for manually filling chemicals
4.6.3 Prevention of spillage and overflow
The actual overall volume of the tank shall exceed the nominal volume by at least 5 %.
The lid shall be:
— attached to the machine, e.g. by means of a chain;
4 © ISO 2017 – All rights reserved

---------------------- Page: 12 ----------------------
oSIST prEN ISO 4254-6:2017
ISO/DIS 4254-6:2017(E)

— fitted with a holding device ensuring a closed position either by means of a positive mechanical
action or lids fixed by screwing;
— fitted so as to prevent leakage of the spray mixture, e.g. by means of a seal.
The level of liquid shall be indicated to the operator during filling and emptying. The nominal volume of
the tank shall be marked.
A pressure‑compensation device shall be fitted on tanks that are not designed to be put under pressure,
in order to keep them at atmospheric pressure when emptying and filling.
4.6.4 Protection from contact with spray mixture when draining
The operator shall be prevented from coming into contact with the spray mixture when emptying the
tank. This requirement is met if
— the draining outlet can be opened without a tool (for example by means of a tap), and
— the flow is directed away from the operator.
An emptying device shall allow the complete emptying of the residue in the tank when the sprayer is in
a horizontal position.
It shall be possible to collect the liquid at the outlet without contaminating the operator or
equipment parts.
The tank outlet shall be guarded against accidental opening (see ISO 16119‑2:2013, 5.1.1.3.2).
See also 6.1 g) and 6.1 k).
4.7 Pressure indicator (manometer)
The sprayer shall have a pressure indicator. The design of the pressure indicator shall be such that in
case of a leakage there is no unreasonable hazard for the operator. This requirement is deemed to be
fulfilled if either
— spray liquid carrying hoses are not located in the operator cabin, or
— additional protection shall be provided, e.g. by imperforate covers completely covering the hoses
and their connecting devices so that exposure of leakage to the operator shall be avoided.
The working pressure(s) shall be clearly readable from the driver’s position. Turning of the head and
the upper body is acceptable.
For analogue pressure gauges, the minimum diameter of pressure gauge dial plate shall be:
— 63 mm where the gauge is connected to controls and positioned within the hand reach of the
operator or between the plane formed by the hitch points of the three‑point linkage and the tractor;
— 100 mm in all other cases.
The gauge case shall be isolated from the spray mixture.
Pressure exceeding the maximum working pressure shall be indicated — for example, on the analogue
pressure gauge by a red marking and on a digital instrument by an (audible or optical) indication
initiated when the pressure reaches the maximum working pressure. See also 6.1 m).
4.8 Protection against overpressure
The sprayer shall be provided with a safety device that prevents the pressure from exceeding the
maximum working pressure of the circuit by more than 20 %.
© ISO 2017 – All rights reserved 5

---------------------- Page: 13 ----------------------
oSIST prEN ISO 4254-6:2017
ISO/DIS 4254-6:2017(E)

The adjustment of this safety device shall be protected against unauthorized or accidental modification.
Its actuation shall not cause any spillage or leakage of liquid from the circuit.
4.9 Product fan
If a sprayer is equipped with a product system fan, the following requirements apply:
— the fan shall be placed or protected so that when the sprayer is operating it shall not be able to draw
in or discharge foreign matter which could injure the operator;
— access to the fan shall be prevented by fixed guards, which may be a combination of imperforate and
mesh guards whose apertures conform to requirements of ISO 13857:2008, Tables 1, 3, 4 and 6;
— when the fan drive is not controlled independently from the pump drive, it shall be possible to
disengage the fan drive from the pump drive from the ground or from a platform.
See also 6.1 h).
4.10 Spray liquid carrying hoses
To avoid hazards to the operator in case of leakage
— hoses shall not be located in the operator cabin, or
— hoses and their connecting devices shall be protected (e.g. by imperforate screens).
All pressurized hoses shall be directly and durably marked with the maximum working pressure.
The maximum working pressure of hoses and the maximum working pressure of connecting devices
shall be at least equal to the maximum working pressure of the circuit [see also 6.1 m), 6.2.3 and 6.2.4].
4.11 Spraying stop control
Each machine shall be equipped at the operator’s position with a spraying stop control device to safely
stop the flow (e.g. by means of two valves placed in series). When the spraying stop control has been
activated, there shall be no dripping.
4.12 Clean water tank
Sprayers shall be equipped with a clean water tank for the operator’s use (e.g. in case a person has been
in contact with chemicals) having a minimum capacity of 15 l. This tank shall be totally isolated from
the other parts of the machine and shall be fitted wit
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.