Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes

This part of this European Standard specifies requirements for aluminium-containing shredded material mixed with other metals and non-metallic components (rubber, plastic, glass etc) produced by shredding end-of-life vehicles, household appliances etc. It is applicable to material intended for further preparation/selection processes by the user to get the aluminium scrap separated from other foreign materials.

Aluminium und Aluminiumlegierungen - Schrott - Teil 8: Schrott aus Nichteisenmaterialien vom Schreddern für Aluminiumseparationsverfahren

Diese Europäische Norm legt die Anforderungen an geschreddertes aluminiumhaltiges Material, das mit anderen metallischen und nichtmetallischen Bestandteilen (Gummi, Kunststoff, Glas usw.) gemischt ist, fest. Es wird beim Schreddern von ausgedienten Fahrzeugen, Haushaltsgeräten usw. produziert. Es ist für Material geeignet, das für weitere Vorbereitungs- und Sortierverfahren beim Anwender bestimmt ist, um Aluminiumschrott durch das Trennen von anderen Fremdstoffen zu erhalten. Die separierte Aluminiumfraktion ist in prEN 13920-9 beschrieben

Aluminium et alliages d'aluminium - Scrap (matieres premieres pour recyclage) - Partie 8: Scrap composé de non-ferreux de broyage destiné aux procédés de récupération de l'aluminium

Cette partie de la présente norme européenne spécifie le scrap d'aluminium contenant des matériaux désintégrés mélangés a d'autres métaux et a des éléments non métalliques (caoutchouc, plastique, verre, etc.) provenant de la désintégration de véhicules, appareils domestiques, etc. en fin de vie. Elle s'applique aux matériaux destinés a des opérations de préparation/sélection ultérieurs par l'utilisateur en vue de séparer le scrap d'aluminium des autres matériaux étrangers.

Aluminij in aluminijeve zlitine – Odpadni aluminij – 8. del: Odpadek, ki vsebuje neželezne materiale iz procesa drobljenega-sekanega pri separaciji aluminija

General Information

Status
Published
Publication Date
31-Dec-2003
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-2004
Due Date
01-Jan-2004
Completion Date
01-Jan-2004

Buy Standard

Standard
SIST EN 13920-8:2004
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine – Odpadni aluminij – 8. del: Odpadek, ki vsebuje neželezne materiale iz procesa drobljenega-sekanega pri separaciji aluminijaAluminium und Aluminiumlegierungen - Schrott - Teil 8: Schrott aus Nichteisenmaterialien vom Schreddern für AluminiumseparationsverfahrenAluminium et alliages d'aluminium - Scrap (matieres premieres pour recyclage) - Partie 8: Scrap composé de non-ferreux de broyage destiné aux procédés de récupération de l'aluminiumAluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys13.030.50RecikliranjeRecyclingICS:Ta slovenski standard je istoveten z:EN 13920-8:2003SIST EN 13920-8:2004en01-januar-2004SIST EN 13920-8:2004SLOVENSKI

STANDARD
SIST EN 13920-8:2004

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13920-8April 2003ICS 13.030.50; 77.120.10English versionAluminium and aluminium alloys - Scrap - Part 8: Scrapconsisting of non-ferrous materials from shredding processesdestined to aluminium separation processesAluminium et alliages d'aluminium - Scrap (matièrespremières pour recyclage) - Partie 8: Scrap composé denon-ferreux de broyage destiné aux procédés derécupération de l'aluminiumAluminium und Aluminiumlegierungen - Schrott - Teil 8:Schrott aus Nichteisenmaterialien vom Schreddern fürAluminiumseparationsverfahrenThis European Standard was approved by CEN on 28 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36

B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13920-8:2003 ESIST EN 13920-8:2004

EN 13920-8:2003 (E)2ContentspageForeword......................................................................................................................................................................31Scope..............................................................................................................................................................42Normative references....................................................................................................................................43Terms and definitions....................................................................................................................................44Ordering information.....................................................................................................................................45Requirements.................................................................................................................................................55.1General............................................................................................................................................................55.2Characteristics...............................................................................................................................................55.3Chemical composition...................................................................................................................................55.4Metal yield.......................................................................................................................................................56Classification procedure, treatment of non-conformities and arbitration...............................................5Bibliography................................................................................................................................................................6SIST EN 13920-8:2004

EN 13920-8:2003 (E)3ForewordThis document (EN 13920-8:2003) has been prepared by Technical Committee CEN /TC 132, "Aluminium andaluminium alloys", the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by October 2003, and conflicting national standards shall be withdrawn at the latestby October 2003.Within its programme of work, Technical Committee CEN/TC 132 has entrusted CEN/TC132/WG 20 "Scrap" toprepare the following standard.EN 13920 comprises the following parts under the general title "Alum

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.