oSIST prEN 18120-13:2024

Packaging - Design for recycling for plastic packaging - Part 13: Recyclability evaluation process for plastic packaging - Protocols for PE and PP flexible packaging

This document covers the design of PE and PP flexible packaging with respect to compatibility of the design with recycling processes available for PE and PP packaging.
Packaging constituents and components used in/on PE and PP flexible packaging but made of materials other than PE and PP are also covered by this document as these need to be evaluated for compatibility with PE and PP mechanical recycling processes.

Verpackung - Recyclingorientierte Gestaltung von Kunststoffverpackungsprodukten - Teil 13 - Verfahren zur Bewertung der Recyclingfähigkeit von Kunststoffverpackungen - Protokolle für flexible Verpackungen aus PE und PP

Dieses Dokument behandelt die Gestaltung flexibler PE- und PP-Verpackungen im Hinblick auf die Kompatibilität der Gestaltung mit den für PE- und PP-Verpackungen verfügbaren PE- und PP-Verpackungen.
Verpackungselemente und -bestandteile, die in/an flexiblen PE- und PP-Verpackungen verwendet werden, aber aus anderen Materialien als PE und PP bestehen, werden ebenfalls in diesem Dokument behandelt, da sie ebenfalls im Hinblick auf die Kompatibilität mit den mechanischen Recyclingprozessen für PE und PP bewertet werden müssen.

Emballages - Conception des emballages plastiques en vue de leur recyclage - Partie 13 : Processus d’évaluation de la recyclabilité des emballages plastiques - Protocoles pour les emballages souples en PE et PP

Le présent document traite de la conception d’emballages souples en PE et PP, et plus particulièrement de la compatibilité de la conception avec les processus de recyclage disponibles pour les emballages en PE et PP.
Les constituants et composants d’emballages utilisés dans/sur les emballages souples en PE et PP, mais fabriqués à partir de matériaux autres que le PE et le PP, sont également couverts par le présent document, car il est nécessaire d’évaluer leur compatibilité avec les processus de recyclage mécanique du PE et du PP.

Embalaža - Načrtovanje, ki omogoča recikliranje plastične embalaže - 13. del: Postopek za ocenjevanje možnosti recikliranja plastične embalaže - Protokoli za prožno plastično embalažo iz polietilena (PE) in polipropilena (PP)

General Information

• Status: Not Published
• Public Enquiry End Date: 01-Nov-2024
• ICS: 13.030.50 - Recycling
• ICS: 55.020 - Packaging and distribution of goods in general
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: EPO - Packaging - sales and grouped
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 20-Aug-2024
• Due Date: 07-Jan-2025
• Mandate: M/584 - Plastics recycling and recycled plastics
• Ref Project: prEN 18120-13 - Packaging - Design for recycling for plastic packaging - Part 13: Recyclability evaluation process for plastic packaging - Protocols for PE and PP flexible packaging

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2024
Embalaža - Načrtovanje, ki omogoča recikliranje plastične embalaže - 13. del:
Postopek za ocenjevanje možnosti recikliranja plastične embalaže - Protokoli za
prožno plastično embalažo iz polietilena (PE) in polipropilena (PP)
Packaging - Design for recycling for plastic packaging - Part 13: Recyclability evaluation
process for plastic packaging - Protocols for PE and PP flexible packaging
Verpackung - Recyclingorientierte Gestaltung von Kunststoffverpackungsprodukten - Teil
13 - Verfahren zur Bewertung der Recyclingfähigkeit von Kunststoffverpackungen -
Protokolle für flexible Verpackungen aus PE und PP
Ta slovenski standard je istoveten z: prEN 18120-13
ICS:
13.030.50 Recikliranje Recycling
55.020 Pakiranje in distribucija blaga Packaging and distribution of
na splošno goods in general
83.080.20 Plastomeri Thermoplastic materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2024
ICS 55.020; 13.030.50; 83.080.20
English Version
Packaging - Design for recycling for plastic packaging -
Part 13: Recyclability evaluation process for plastic
packaging - Protocols for PE and PP flexible packaging
Verpackung - Recyclingorientierte Gestaltung von
Kunststoffverpackungsprodukten - Teil 13 - Verfahren
zur Bewertung der Recyclingfähigkeit von
Kunststoffverpackungen - Protokolle für flexible
Verpackungen aus PE und PP
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 261.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 18120-13:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Recyclability evaluation process . 8
4.1 Principle . 8
4.2 Sampling .10
4.2.1 Test material requirements . 10
4.2.2 Control sample selection . 11
4.2.3 Virgin resin selection . 11
4.3 Test method .11
4.4 Test report .11
4.5 Evaluation .12
Annex A (normative) Experimental determination of the technical recyclability of PE and PP flexible
packaging samples . 13
A.1 Principle . 13
A.1.1 Apparatus . 13
A.1.2 Materials . 14
A.1.3 Sampling . 14
A.1.4 Procedure . 14
A.1.5 Expression of results . 20
A.1.6 Test report . 22
Annex B (normative) Recommendations for virgin and control materials. 24
Annex C (informative) Benchmark recommendations for the assessment of technical recyclability 25
Annex D (informative) Overview of the test method . 27
Bibliography . 29
European foreword
This document (prEN 18120-13:2024) has been prepared by Technical Committee CEN/TC 261
“Packaging”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
Introduction
EN 18120 consisting of 15 parts aims via a series of guidelines and protocols to establish consistency and
improvement for the Design for Recycling of household, industrial and commercial plastic packaging.
— Part 1: Definitions and principles for design-for-recycling of plastic packaging
— Part 2: Process and governance to evaluate the recyclability of plastic packaging
— Part 3: Sortability evaluation process for plastic packaging
— Part 4: Guideline for PET bottles
— Part 5: Guideline for PET rigid packaging (except bottle)
— Part 6: Guideline for PE and PP rigid packaging
— Part 7: Guideline and protocols for PE and PP flexible packaging
— Part 8: Guideline for PS and XPS packaging
— Part 9: Guideline for EPS packaging
— Part 10: Recyclability evaluation process for plastic packaging — Protocols for PET bottles
— Part 11: Recyclability evaluation process for plastic packaging — Protocols for PET other rigid
packaging
— Part 12: Recyclability evaluation process for plastic packaging — Protocols for PE and PP rigid
packaging
— Part 13: Recyclability evaluation process for plastic packaging — Protocols for PE and PP flexible
packaging
— Part 14: Recyclability evaluation process for plastic packaging — Protocols for PS and XPS packaging
— Part 15: Recyclability evaluation process for plastic packaging — Protocols for EPS packaging
Design for recycling guidelines are a common way of describing compatibility with plastic packaging
collection, sorting and recycling into high quality recycled plastic into state-of-the-art facilities. They
provide guidance on the level compatibility, defined as:
— green: Packaging constituents with full compatibility with recycling;
— yellow: Packaging constituents with limited compatibility with recycling;
— red: Packaging constituents which are not compatible with recycling.
Recyclability guidelines will require regular review and improvement to reflect innovations in design,
collection, sorting and recycling.
The Design for recycling guidelines provided in this series of standards are representative of the state of
the art in Europe and cover all steps from design for recycling, packaging waste collection, sorting,
recycling into recycled plastic and to use in a new application.
Packaging recyclability is the combination of five parameters: packaging designed for recycling,
packaging waste collection, sorting when necessary, recycling and use of recycled plastic in a new
application. This series of standards covers one parameter: the design for recycling.

1 Scope
This document covers the design of PE and PP flexible packaging with respect to compatibility of the
design with recycling processes available for PE and PP packaging.
Packaging constituents and components used in/on PE and PP flexible packaging but made of materials
other than PE and PP are also covered by this document as these need to be evaluated for compatibility
with PE and PP mechanical recycling processes.
2 Normative references
The following documents are referred to in the text in such a way that their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
prEN 18120-1, Packaging — Design for recycling of plastic packaging — Part 1: Definitions and principles
for design-for-recycling of plastic packaging
prEN 18120-12, Packaging — Design for recycling of plastic packaging — Part 12: Recyclability evaluation
process for plastic packaging — Protocols for PE and PP rigid packaging
EN 14477, Packaging — Flexible packaging material — Determination of puncture resistance — Test
methods
EN ISO 527-1, Plastics — Determination of tensile properties — Part 1: General principles (ISO 527-1)
EN ISO 527-2, Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and
extrusion plastics (ISO 527-2)
EN ISO 527-3, Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
(ISO 527-3)
EN ISO 1133-1:2022, Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate
(MVR) of thermoplastics — Part 1: Standard method (ISO 1133-1:2022)
EN ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion
method, liquid pycnometer method and titration method (ISO 1183-1)
EN ISO 3451-1, Plastics — Determination of ash — Part 1: General methods (ISO 3451-1)
EN ISO 6383-2, Plastics — Film and sheeting — Determination of tear resistance — Part 2: Elmendorf
method (ISO 6383-2)
EN ISO 15512, Plastics — Determination of water content (ISO 15512)
EN ISO 18314-1, Analytical colourimetry — Part 1: Practical colour measurement (ISO 18314-1)
ISO 4593, Plastics — Film and sheeting — Determination of thickness by mechanical scanning
ISO 7765-1, Plastics film and sheeting — Determination of impact resistance by the free-falling dart method
— Part 1: Staircase methods
ISO 11357-1, Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
ISO 11357-3, Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature
and enthalpy of melting and crystallization
ISO 11358-1, Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles
ISO 14782, Plastics — Determination of haze for transparent materials
3 Terms and definitions
For the purposes of this document, the terms and definitions given in prEN 18120-1 and the following
apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: availa
...