Packaging - Design for recycling for plastic packaging - Part 15: Recyclability evaluation process for plastic packaging - Protocols for EPS packaging

This document covers the design of EPS packaging with respect to compatibility of the design with recycling processes.
Packaging constituents and packaging components made of other materials than EPS are also covered by this document as they need to be evaluated on compatibility with polymer recycling.

Verpackung - Recyclingorientierte Gestaltung von Kunststoffverpackungsprodukten - Teil 15: Verfahren zur Bewertung der Recyclingfähigkeit von Kunststoffverpackungen - Protokolle für Verpackungen aus EPS

Dieses Dokument behandelt die Gestaltung von EPS in Verpackungen im Hinblick auf die Kompatibilität der Gestaltung mit Recyclingprozessen.
Verpackungselemente und -bestandteile aus anderen Materialien als EPS werden ebenfalls durch dieses Dokument behandelt, da sie hinsichtlich der Kompatibilität mit dem Polymer-Recycling bewertet werden müssen.

Emballages - Conception des emballages plastiques en vue de leur recyclage - Partie 15 : Processus d’évaluation de la recyclabilité des emballages plastiques - Protocoles pour les emballages en PSE

Le présent document traite de la conception d’emballages en PSE, et plus particulièrement de la compatibilité de la conception avec les processus de recyclage.
Les constituants et composants d’emballages fabriqués à partir de matériaux autres que le PSE sont également couverts par le présent document, car il est nécessaire d’évaluer leur compatibilité avec le recyclage des polymères.

Embalaža - Načrtovanje, ki omogoča recikliranje plastične embalaže - 15. del: Postopek za ocenjevanje možnosti recikliranja plastične embalaže - Protokoli za plastično embalažo iz ekspandiranega polistirena (EPS)

General Information

Status
Not Published
Public Enquiry End Date
01-Nov-2024
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
20-Aug-2024
Due Date
07-Jan-2025

Buy Standard

Draft
prEN 18120-15:2024
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2024
Embalaža - Načrtovanje, ki omogoča recikliranje plastične embalaže - 15. del:
Postopek za ocenjevanje možnosti recikliranja plastične embalaže - Protokoli za
plastično embalažo iz ekspandiranega polistirena (EPS)
Packaging - Design for recycling for plastic packaging - Part 15: Recyclability evaluation
process for plastic packaging - Protocols for EPS packaging
Verpackung - Recyclingorientierte Gestaltung von Kunststoffverpackungsprodukten - Teil
15: Verfahren zur Bewertung der Recyclingfähigkeit von Kunststoffverpackungen -
Protokolle für Verpackungen aus EPS
Ta slovenski standard je istoveten z: prEN 18120-15
ICS:
13.030.50 Recikliranje Recycling
55.020 Pakiranje in distribucija blaga Packaging and distribution of
na splošno goods in general
83.080.20 Plastomeri Thermoplastic materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2024
ICS 55.020; 13.030.50; 83.080.20
English Version
Packaging - Design for recycling for plastic packaging -
Part 15: Recyclability evaluation process for plastic
packaging - Protocols for EPS packaging
Verpackung - Recyclingorientierte Gestaltung von
Kunststoffverpackungsprodukten - Teil 15: Verfahren
zur Bewertung der Recyclingfähigkeit von
Kunststoffverpackungen - Protokolle für Verpackungen
aus EPS
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 261.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 18120-15:2024 E
worldwide for CEN national Members.

Contents Page
European foreword .3
Introduction .4
1 Scope .6
2 Normative references .6
3 Terms and definitions .6
4 Mandatory elements of evaluation process guidelines .6
4.1 Listing of relevant aspects . 6
4.2 Applicable unit operations for packaging type . 7
Bibliography . 13

European foreword
This document (prEN 18120-15:2024) has been prepared by Technical Committee CEN/TC 261
“Packaging”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a standardization request addressed to CEN by the
European Commission. The Standing Committee of the EFTA States subsequently approves these
requests for its Member States.

Introduction
EN 18120 consisting of 15 parts aims via a series of guidelines and protocols to establish
consistency and improvement for the Design for recycling of household, industrial and
commercial plastic packaging.
— Part 1: Definitions and principles for design-for-recycling of plastic packaging
— Part 2: Process and governance to evaluate the recyclability of plastic packaging
— Part 3: Sortability evaluation process for plastic packaging
— Part 4: Guideline for PET bottles
— Part 5: Guideline for PET rigid packaging (except bottle)
— Part 6: Guideline for PE and PP rigid packaging
— Part 7: Guideline and protocols for PE and PP flexible packaging
— Part 8: Guideline for PS and XPS packaging
— Part 9: Guideline for EPS packaging
— Part 10: Recyclability evaluation process for plastic packaging — Protocols for PET bottles
— Part 11: Recyclability evaluation process for plastic packaging — Protocols for PET other
rigid packaging
— Part 12: Recyclability evaluation process for plastic packaging — Protocols for PE and PP
rigid packaging
— Part 13: Recyclability evaluation process for plastic packaging — Protocols for PE and PP
flexible packaging
— Part 14: Recyclability evaluation process for plastic packaging — Protocols for PS and XPS
packaging
— Part 15: Recyclability evaluation process for plastic packaging — Protocols for EPS packaging
Design for recycling guidelines are a common way of describing compatibility with plastic
packaging collection, sorting and recycling into high quality recycled plastic into state-of-the-art
facilities. They provide guidance on the level compatibility, defined as:
— green: Packaging constituents with full compatibility with recycling;
— yellow: Packaging constituents with limited compatibility with recycling;
— red: Packaging constituents which are not compatible with recycling.
Recyclability guidelines will require regular review and improvement to reflect innovations in
design, collection, sorting and recycling.
The Design for recycling guidelines provided in this series of standards are representative of the
state of the art in Europe and cover all steps from design for recycling, packaging waste collection,
sorting, recycling into recycled plastic and to use in a new application.
Packaging recyclability is the combination of five parameters: packaging designed for recycling,
packaging waste collection, sorting when necessary, recycling and use of recycled plastic in a new
application. This series of standards covers one parameter: the design for recycling.

1 Scope
This document covers the design of EPS packaging with respect to compatibility of the design
with recycling processes.
Packaging constituents and packaging components made of other materials than EPS are also
covered by this document as they need to be evaluated on compatibility with polymer recycling.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
prEN 18120-1, Packaging — Design for recycling of plastic packaging — Part 1: Definitions and
principles for design-for-recycling of plastic packaging
EN ISO 527-2, Plastics — Determination of tensile properties — Test conditions for moulding and
extrusion plastics (ISO 527-2)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in prEN 18120-1 apply.
ISO and IEC maintain terminology databases for use in standardization at the following
addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
4 Mandatory elements of evaluation process guidelines
4.1 Listing of relevant aspects
Design for recyclability evaluation process guidelines per product group for a packaging:
— list of unit operations for the whole process until the recyclate is used;
— specification of unit operations process capability to be used for the evaluation: best available
technology/”mainstream”/state of the art;
— relevant process conditions settings for testing for all relevant unit operations;
— list of mandatory sampling and tests to be performed on the samples for each unit operation.
The goals of the evaluation is to identify all foreseeable critical points and establish a testing
strategy that either confirms or excludes a negative impact for each critical points considered.
4.2 Applicable unit operations for packaging type
For EPS protective packaging and fish boxes the following unit operations are applicable:
Evaluation of inn
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.