SIST EN ISO 18119:2019/A1:2021
(Main)Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing - Amendment 1 (ISO 18119:2018/Amd 1:2021)
Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing - Amendment 1 (ISO 18119:2018/Amd 1:2021)
Gasflaschen - Nahtlose Gasflaschen und Großflaschen aus Stahl und Aluminiumlegierungen - Wiederkehrende Inspektion und Prüfung - Änderung 1 (ISO 18119:2018/Amd 1:2021)
No scope available
Bouteilles à gaz - Bouteilles et tubes à gaz en acier et en alliages d'aluminium, sans soudure - Contrôles et essais périodiques - Amendement 1 (ISO 18119:2018/Amd 1:2021)
Plinske jeklenke - Plinske jeklenke in velike jeklenke iz celega iz jekla in aluminijevih zlitin - Periodični pregled in preskušanje - Dopolnilo A1 (ISO 18119:2018/Amd 1:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 18119:2019/A1:2021
01-september-2021
Plinske jeklenke - Plinske jeklenke in velike jeklenke iz celega iz jekla in
aluminijevih zlitin - Periodični pregled in preskušanje - Dopolnilo A1 (ISO
18119:2018/Amd 1:2021)
Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes -
Periodic inspection and testing - Amendment 1 (ISO 18119:2018/Amd 1:2021)
Gasflaschen - Nahtlose Gasflaschen und Großflaschen aus Stahl und
Aluminiumlegierungen - Wiederkehrende Inspektion und Prüfung - Änderung 1 (ISO
18119:2018/Amd 1:2021)
Bouteilles à gaz - Bouteilles et tubes à gaz en acier et en alliages d'aluminium, sans
soudure - Contrôles et essais périodiques - Amendement 1 (ISO 18119:2018/Amd
1:2021)
Ta slovenski standard je istoveten z: EN ISO 18119:2018/A1:2021
ICS:
23.020.35 Plinske jeklenke Gas cylinders
77.150.10 Aluminijski izdelki Aluminium products
SIST EN ISO 18119:2019/A1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 18119:2019/A1:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 18119:2019/A1:2021
EN ISO 18119:2018/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2021
EUROPÄISCHE NORM
ICS 23.020.35
English Version
Gas cylinders - Seamless steel and seamless aluminium-
alloy gas cylinders and tubes - Periodic inspection and
testing - Amendment 1 (ISO 18119:2018/Amd 1:2021)
Bouteilles à gaz - Bouteilles et tubes à gaz en acier et en Gasflaschen - Nahtlose Gasflaschen und Großflaschen
alliages d'aluminium, sans soudure - Contrôles et aus Stahl und Aluminiumlegierungen -
essais périodiques - Amendement 1 (ISO Wiederkehrende Inspektion und Prüfung - Änderung 1
18119:2018/Amd 1:2021) (ISO 18119:2018/Amd 1:2021)
This amendment A1 modifies the European Standard EN ISO 18119:2018; it was approved by CEN on 14 May 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18119:2018/A1:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 18119:2019/A1:2021
EN ISO 18119:2018/A1:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 18119:2019/A1:2021
EN ISO 18119:2018/A1:2021 (E)
European foreword
This document (EN ISO 18119:2018/A1:2021) has been prepared by Technical Committee ISO/TC 58
"Gas cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the
secretariat of which is held by BSI.
This Amendment to the European Standard EN ISO 18119:2018 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by November 2021,
and conflicting national standards shall be withdrawn at the latest by November 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 18119:2018/Amd 1:2021 has been approved by CEN as EN ISO 18119:2018/A1:2021
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 18119:2019/A1:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 18119:2019/A1:2021
INTERNATIONAL ISO
STANDARD 18119
First edition
2018-05
AMENDMENT 1
2021-05
Gas cylinders — Seamless steel
and seamless aluminium-alloy gas
cylinders and tubes — Periodic
inspection and testing
AMENDMENT 1
Bouteilles à gaz — Bouteilles et tubes à gaz en acier et en alliages
d'aluminium, sans soudure — Contrôles et essais périodiques
AMENDEMENT 1
Reference number
ISO 18119:2018/Amd.1:2021(E)
©
ISO 2021
---------------------- Page: 7 ----------------------
SIST EN ISO 18119:2019/A1:2021
ISO 18119:2018/Amd.1:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized oth
...
SLOVENSKI STANDARD
SIST EN ISO 18119:2019/oprA1:2020
01-julij-2020
Plinske jeklenke - Nevarjene plinske jeklenke in velike jeklenke iz jekla in
aluminijevih zlitin - Periodični pregled in preskušanje - Dopolnilo A1 (ISO
18119:2018/DAmd 1)
Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes -
Periodic inspection and testing - Amendment 1 (ISO 18119:2018/DAmd 1)
Gasflaschen - Nahtlose Gasflaschen und Großflaschen aus Stahl und
Aluminiumlegierungen - Wiederkehrende Inspektion und Prüfung (ISO
18119:2018/DAmd 1)
Bouteilles à gaz - Bouteilles et tubes à gaz en acier et en alliages d'aluminium, sans
soudure - Contrôles et essais périodiques - Amendement 1 (ISO 18119:2018/DAmd 1)
Ta slovenski standard je istoveten z: EN ISO 18119:2018/prA1
ICS:
23.020.35 Plinske jeklenke Gas cylinders
77.150.10 Aluminijski izdelki Aluminium products
SIST EN ISO 18119:2019/oprA1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 18119:2019/oprA1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 18119:2019/oprA1:2020
DRAFT AMENDMENT
ISO 18119:2018/DAM 1
ISO/TC 58/SC 4 Secretariat: ANSI
Voting begins on: Voting terminates on:
2020-05-22 2020-08-14
Gas cylinders — Seamless steel and seamless
aluminium-alloy gas cylinders and tubes — Periodic
inspection and testing
AMENDMENT 1
Bouteilles à gaz — Bouteilles et tubes à gaz en acier et en alliages d'aluminium, sans soudure — Contrôles
et essais périodiques
AMENDEMENT 1
ICS: 23.020.35
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 18119:2018/DAM 1:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
SIST EN ISO 18119:2019/oprA1:2020
ISO 18119:2018/DAM 1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 18119:2019/oprA1:2020
ISO 18119:2018/DAM 1:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different ty
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.