SIST EN 1264-5:2021
(Main)Water based surface embedded heating and cooling systems - Part 5: Determination of the thermal output for wall and ceiling heating and for floor, wall and ceiling cooling
Water based surface embedded heating and cooling systems - Part 5: Determination of the thermal output for wall and ceiling heating and for floor, wall and ceiling cooling
This European Standard applies to water based heating and cooling systems embedded into the enclosure surfaces of the room to be heated or to be cooled. Part 5 of this standard deals with the recalculation of values determined in Part 2 of this European Standard for the system in question, using it for floor heating applications. The recalculation method described in this part of the standard enables the conversion of the calculation and test results of Part 2 into results for other surface orientations in the room, i. e. for ceiling and wall heating, as well as for the application as cooling surfaces, i. e. for floor, ceiling and wall cooling. It has to be emphasised that the test results of Part 2 of this European Standard are the basis of all calculation. Therefore the use of this prove method is necessary whether or not the system in question is used for heating or cooling application.
This European Standard shall be applied to commercial trade and practical engineering if proved and certifiable values of the thermal output shall be used.
Raumflächenintegrierte Heiz- und Kühlsysteme mit Wasserdurchströmung - Teil 5: Bestimmung der Wärmeleistung von Wand- und Deckenheizung sowie Kühlleistung von Fußboden-, Wand- und Deckenkühlung
Die Normenreihe EN 1264 gibt Leitlinien für in Wohn- und anderen Gebäuden (z. B. Bürogebäuden, öffentlichen Gebäuden sowie Gewerbe- und Industriegebäuden) installierte raumflächenintegrierte Heiz und Kühlsysteme und legt einen Schwerpunkt auf Systeme, die für den Zweck der thermischen Behaglichkeit installiert werden.
Die Normenreihe EN 1264 gibt Leitlinien für Heiz- und Kühlsysteme mit Wasserdurchströmung, die in die Raumumschließungsflächen des zu heizenden oder des zu kühlenden Raumes eingebettet sind. Sie legt ggf. auch die entsprechende Verwendung anderer Heizmittel als Wasser fest.
Die Normenreihe EN 1264 legt die Identifizierung standardisierter Produktmerkmale durch Berechnung und Prüfung der Wärmeleistung der Heizung für technische Spezifikationen und die Zertifizierung fest. Für das Design, den Bau und den Betrieb dieser Anlagen siehe EN 1264 3 und EN 1264 4 für die Typen A, B, C, D, H, I und J. Für die Typen E, F und G siehe Normenreihe EN ISO 11855.
Die in der Normenreihe EN 1264 festgelegten Systeme grenzen an den tragenden Untergrund der Umschließungsflächen des Gebäudes an und werden direkt oder mit Befestigungshalterungen angebracht. Die Normenreihe EN 1264 trifft keine Festlegungen für in abgehängten Decken montierte Deckensysteme mit einem auslegungsgemäßen offenen Luftspalt zwischen dem System und der Gebäudestruktur, der eine thermisch induzierte Umwälzung der Luft erlaubt. Die Wärmeleistung dieser Systeme kann nach der Normenreihe EN 14037 und EN 14240 bestimmt werden.
EN 1264 5 legt die Umrechnung von Werten fest, die in EN 1264 2 für das betreffende System bestimmt wurden. Sie ermöglicht die Umrechnung der Berechnungs- und Messergebnisse von EN 1264 2 in Ergebnisse für andere Oberflächenausrichtungen im Raum, d. h. für die Wand- und Deckenheizung, sowie für die Anwendung als Kühlflächen, d. h. für die Fußboden , Decken- und Wandkühlung. Daher sind die Prüfergebnisse von EN 1264 2 die Basis aller Berechnungen, unabhängig davon, ob das betreffende System für Heiz- oder für Kühlanwendungen eingesetzt wird.
Systèmes de surfaces chauffantes et rafraîchissantes hydrauliques intégrées - Partie 5 : Détermination de l'émission thermique des surfaces chauffantes et rafraîchissantes intégrées dans les sols, les plafonds et les murs
La série EN 1264 fournit des lignes directrices pour les systèmes de surfaces chauffantes et rafraîchissantes intégrées dans les bâtiments résidentiels et non résidentiels (par exemple, des bureaux, des bâtiments publics, commerciaux et industriels), et se concentre sur les systèmes installés à des fins de confort thermique.
La série EN 1264 fournit des lignes directrices pour les systèmes de surfaces chauffantes et rafraîchissantes intégrées dans les parois des pièces à chauffer ou à rafraîchir. Elle spécifie également l'utilisation de fluides caloporteurs autres que l'eau, le cas échéant.
La série EN 1264 spécifie les caractéristiques normalisées des produits en calculant et en mettant à l'essai l'émission thermique du chauffage pour les spécifications techniques et la certification. Pour la conception, la construction et le fonctionnement de ces systèmes, voir l'EN 1264-3 et l'EN 1264-4 pour les types A, B, C, D, H, I et J. Pour les types E, F et G, voir la série EN ISO 11855.
Les systèmes spécifiés dans la série EN 1264 sont fixés directement ou à l'aide de supports de fixation au plancher porteur des parois du bâtiment. La série EN 1264 ne spécifie pas les systèmes de plafond montés dans un plafond suspendu, dont l'entrefer ouvert conçu entre le système et la structure du bâtiment permet la circulation de l'air induite par la chaleur. L'émission thermique de ces systèmes peut être déterminée selon la série EN 14037 et l'EN 14240.
L'EN 1264-5 spécifie le recalcul des valeurs déterminées dans l'EN 1264-2 pour le système en question. Il permet de convertir les résultats de calcul et de mesure de l'EN 1264-2 en résultats pour des surfaces orientées différemment, telles que les plafonds et les murs chauffants, ainsi que pour les applications de surfaces rafraîchissantes, telles que les systèmes rafraîchissants par le sol, les plafonds ou les murs. Les résultats d'essais de l'EN 1264-2constituent la base de tous les calculs, que le système en question soit utilisé ou non pour des applications de chauffage ou de refroidissement.
Ploskovni sistemi za ogrevanje in hlajenje z vodo - 5. del: Določevanje oddaje toplote za stensko in stropno ogrevanje ter talno, stensko in stropno hlajenje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 1264-5:2021
01-julij-2021
Nadomešča:
SIST EN 1264-5:2009
Ploskovni sistemi za ogrevanje in hlajenje z vodo - 5. del: Določevanje oddaje
toplote za stensko in stropno ogrevanje ter talno, stensko in stropno hlajenje
Water based surface embedded heating and cooling systems - Part 5: Determination of
the thermal output for wall and ceiling heating and for floor, wall and ceiling cooling
Raumflächenintegrierte Heiz- und Kühlsysteme mit Wasserdurchströmung - Teil 5:
Bestimmung der Wärmeleistung von Wand- und Deckenheizung sowie Kühlleistung von
Fußboden-, Wand- und Deckenkühlung
Systèmes de surfaces chauffantes et rafraîchissantes hydrauliques intégrées - Partie 5 :
Détermination de l'émission thermique des surfaces chauffantes et rafraîchissantes
intégrées dans les sols, les plafonds et les murs
Ta slovenski standard je istoveten z: EN 1264-5:2021
ICS:
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
SIST EN 1264-5:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 1264-5:2021
---------------------- Page: 2 ----------------------
SIST EN 1264-5:2021
EN 1264-5
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2021
EUROPÄISCHE NORM
ICS 91.140.10 Supersedes EN 1264-5:2008
English Version
Water based surface embedded heating and cooling
systems - Part 5: Determination of the thermal output for
wall and ceiling heating and for floor, wall and ceiling
cooling
Systèmes de surfaces chauffantes et rafraîchissantes Raumflächenintegrierte Heiz- und Kühlsysteme mit
hydrauliques intégrées - Partie 5 : Détermination de Wasserdurchströmung - Teil 5: Bestimmung der
l'émission thermique des surfaces chauffantes et Wärmeleistung von Wand- und Deckenheizung sowie
rafraîchissantes intégrées dans les sols, les plafonds et Kühlleistung von Fußboden-, Wand- und
les murs Deckenkühlung
This European Standard was approved by CEN on 12 April 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1264-5:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 1264-5:2021
EN 1264-5:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Calculation method . 6
5 Test report . 7
Annex A (normative) Figures and tables . 8
Annex B (informative) Explanations concerning the specification of the heat exchange
coefficients of Table A.1 . 10
Bibliography . 11
2
---------------------- Page: 4 ----------------------
SIST EN 1264-5:2021
EN 1264-5:2021 (E)
European foreword
This document (EN 1264-5:2021) has been prepared by Technical Committee CEN/TC 130 “Space
heating appliances without integral heat sources”, the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2021, and conflicting national standards
shall be withdrawn at the latest by November 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1264-5:2008.
The main changes compared to the previous edition are listed below:
a) Modification of the Title;
b) Clarification of the Scope;
c) Improved wording, especially the term “prove method”.
EN 1264, Water based surface embedded heating and cooling systems, consists of the following parts:
— Part 1: Definitions and symbols;
— Part 2: Floor heating: Methods for the determination of the thermal output using calculations and
experimental tests;
— Part 3: Dimensioning;
— Part 4: Installation;
— Part 5: Determination of the thermal output for wall and ceiling heating and for floor, wall and ceiling
cooling.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 1264-5:2021
EN 1264-5:2021 (E)
Introduction
The EN 1264 series is based on the realization that in the field of commercial trade the thermal output
of heating and cooling systems represents the basis of rating. In order to be able to evaluate and
compare different heating and cooling systems, it is therefore necessary to refer to values determined
using one single, unambiguously defined method. The basis for doing so are the test methods for the
determination of the thermal output of floor heating systems specified in EN 1264-2. In analogy to
EN 442-2, Radiators and convectors — Part 2: Test methods and rating, this test method provides
characteristic partial load curves under defined boundary conditions as well as the characteristic
output of the system represented by the standard thermal output together with the associated standard
temperature difference between the heating medium and the room temperature.
4
---------------------- Page: 6 ----------------------
SIST EN 1264-5:2021
EN 1264-5:2021 (E)
1 Scope
The EN 1264 series gives guidelines for surface embedded heating and cooling systems installed in
buildings, residential and non-residential (e.g. office, public, commercial and industrial buildings) and
focuses on systems installed for the purpose of thermal comfort.
The EN 1264 series gives guidelines for water based heating and cooling systems embedded into the
enclosure surfaces of the room to be heated or to be cooled. It also specifies the use of other heating
media instead of water, as appropriate.
The EN 1264 series specifies standardized product characteristics by calculation and testing the
thermal output of heating for technical specifications and certification. For the design, construction and
operation of these systems, see EN 1264-3 and EN 1264-4 for the types A, B, C, D, H, I and J. For the
types E, F and G, see the EN ISO 11855 series.
The systems specified in the EN 1264 series are adjoined to the structural base of the enclosure
surfaces of the building, mounted directly or with fixing supports. The EN 1264 series does not specify
ceiling systems mounted in a suspended ceiling with a designed open air gap between the system and
the building structure which allows the thermally induced circulation of the air. The thermal output of
these systems can be determined according to the EN 14037 series and EN 14240.
EN 1264-5 specifies the recalculation of values determined in EN 1264-2 for the system in question. It
enables the conversion of the calculation and measurement results of EN 1264-2 into results for other
surface orientations in the room, i.e. for ceiling and wall heating, as well as for
...
SLOVENSKI STANDARD
oSIST prEN 1264-5:2020
01-januar-2020
Ploskovni sistemi za ogrevanje in hlajenje z vodo - 5. del: Grelne in hladilne
površine, vgrajene v tla, strop ali stene - Določevanje oddaje toplote
Water based surface embedded heating and cooling systems - Part 5: Heating and
cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal
output
Raumflächenintegrierte Heiz- und Kühlsysteme mit Wasserdurchströmung - Teil 5: Heiz-
und Kühlflächen in Fußböden, Decken und Wänden - Bestimmung der Wärmeleistung
und der Kühlleistung
Systèmes de surfaces chauffantes et rafraîchissantes hydrauliques intégrées - Partie 5 :
Surfaces chauffantes et rafraîchissantes intégrées dans les sols, les plafonds et les murs
- Détermination de l'émission thermique
Ta slovenski standard je istoveten z: prEN 1264-5
ICS:
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
oSIST prEN 1264-5:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 1264-5:2020
---------------------- Page: 2 ----------------------
oSIST prEN 1264-5:2020
DRAFT
EUROPEAN STANDARD
prEN 1264-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2020
ICS 91.140.10 Will supersede EN 1264-5:2008
English Version
Water based surface embedded heating and cooling
systems - Part 5: Heating and cooling surfaces embedded
in floors, ceilings and walls - Determination of the thermal
output
Systèmes de surfaces chauffantes et rafraîchissantes Raumflächenintegrierte Heiz- und Kühlsysteme mit
hydrauliques intégrées - Partie 5 : Surfaces chauffantes Wasserdurchströmung - Teil 5: Heiz- und Kühlflächen
et rafraîchissantes intégrées dans les sols, les plafonds in Fußböden, Decken und Wänden - Bestimmung der
et les murs - Détermination de l'émission thermique Wärmeleistung und der Kühlleistung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 130.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1264-5:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 1264-5:2020
prEN 1264-5:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Calculation method . 6
5 Test report . 6
Annex A (normative) Figures and tables . 8
Annex B (informative) Explanations concerning the specification of the heat exchange
coefficients of Table A.1 . 10
Bibliography . 11
2
---------------------- Page: 4 ----------------------
oSIST prEN 1264-5:2020
prEN 1264-5:2020 (E)
European foreword
This document (prEN 1264-5:2020) has been prepared by Technical Committee CEN/TC 130 “Space
heating appliances without integral heat sources”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 1264-5:2008.
This document, Water based surface embedded heating and cooling systems, consists of the following
parts:
— Part 1: Definitions and symbols;
— Part 2: Floor heating: Methods for the determination of the thermal output using calculations and
experimental tests;
— Part 3: Dimensioning;
— Part 4: Installation;
— Part 5: Determination of the thermal output for wall and ceiling heating and for floor, wall and ceiling
cooling.
The main changes with respect to the previous edition are listed below:
a) Modified the title;
b) Clarified the scope;
c) Improved wording, especially the term “prove method”.
3
---------------------- Page: 5 ----------------------
oSIST prEN 1264-5:2020
prEN 1264-5:2020 (E)
Introduction
EN 1264 is based on the realization that in the field of commercial trade the thermal output of heating
and cooling systems represents the basis of rating. In order to be able to evaluate and compare different
heating and cooling systems, it is, therefore, necessary to refer to values determined using one single,
unambiguously defined method. The basis for doing so are the test methods for the determination of the
thermal output of floor heating systems specified in EN 1264-2. In analogy to EN 442-2, Radiators and
convectors — Part 2: Test methods and rating, this test method provides characteristic partial load curves
under defined boundary conditions as well as the characteristic output of the system represented by the
standard thermal output together with the associated standard temperature difference between the
heating medium and the room temperature.
4
---------------------- Page: 6 ----------------------
oSIST prEN 1264-5:2020
prEN 1264-5:2020 (E)
1 Scope
EN 1264 covers surface embedded heating and cooling systems installed in buildings, residential and
non-residential (e.g. office, public, commercial and industrial buildings) and focuses on systems installed
for the purpose of thermal comfort.
EN 1264 applies to water based heating and cooling systems embedded into the enclosure surfaces of the
room to be heated or to be cooled. It also applies as appropriate to the use of other heating media instead
of water.
EN 1264 applies to identify standardized product characteristics by calculation and testing the thermal
output of heating for technical specifications and certification. For the design, construction and operation
of these systems, EN ISO 11855 applies.
The systems covered in EN 1264 are adjoined to the structural base of the enclosure surfaces of the
building, mounted directly or with fixing supports. It does not cover ceiling systems mounted in a
suspended ceiling with a designed open air gap between the system and the building structure which
allows the thermally induced circulation of the air. The thermal output of these systems can be
determined according to ISO 18566, EN 14037 and EN 14240.
EN 1264-5 deals with the recalculation of values determined in EN 1264-2 for the system in question. It
enables the conversion of the calculation and measurement results of EN 1264-2 into results for other
surface orientations in the room, i.e. for ceiling and wall heating, as well as for the application as cooling
surfaces, i.e. for floor, ceiling and wall cooling. The test results of EN 1264-2 are the basis of all calculation,
whether or not the system in question is used for heating or cooling application.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.