Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output

This European Standard applies to water based heating and cooling systems embedded into the enclosure surfaces of the room to be heated or to be cooled. Part 5 of this standard deals with the recalculation of values determined in Part 2 of this European
Standard for the system in question, using it for floor heating applications. The recalculation method described in this part of the standard enables the conversion of the calculation and test results of Part 2 into results for other surface orientations in the room,
i. e. for ceiling and wall heating, as well as for the application as cooling surfaces, i. e. for floor, ceiling and wall cooling. It has to be emphasised that the test results of Part 2 of this European Standard are the basis of all calculation. Therefore the use of this prove method is necessary whether or not the system in question is used for heating or cooling application.

Raumflächenintegrierte Heiz und Kühlsysteme mit Wasserdurchströmung - Teil 5: Heiz­ und Kühlflächen in Fußböden, Decken und Wänden - Bestimmung der Wärmeleistung und der Kühlleistung

Diese Europäische Norm gilt für Heiz  und Kühlsysteme mit Wasserdurchströmung, die in die Raumum-schließungsflächen des zu heizenden oder zu kühlenden Raumes integriert sind. Teil 5 dieser Norm behan-delt die Umrechnung von Werten, die in Teil 2 dieser Europäischen Norm für das betreffende System bei Anwendung als Fußbodenheizung bestimmt wurden. Das im vorliegenden Teil der Norm beschriebene Umrechnungsverfahren ermöglicht die Umrechnung der Berechnungs  und experimentellen Ergebnisse von Teil 2 in Ergebnisse für andere Oberflächenausrichtungen im Raum, d. h. für die Wand  und Decken¬heizung, sowie für die Anwendung als Kühlflächen, d. h. für die Fußboden , Decken  und Wandkühlung. Es muss betont werden, dass Grundlage aller Berechnungen die Ergebnisse von Teil 2 dieser Europäischen Norm sind. Daher ist die Anwendung dieses Prüfverfahrens unabhängig davon erforderlich, ob das betreffende System für Heiz  oder für Kühlanwendungen eingesetzt wird.
Die vorliegende Europäische Norm ist auf den kommerziellen Handel und das praktische Ingenieurswesen anzuwenden, sofern geprüfte und zertifizierbare Werte für die Wärme /Kühlleistung erforderlich sind.

Systèmes de surfaces chauffantes et refraîchissantes hydrauliques intégrées - Partie 5: Surfaces chauffantes et refraîchissantes intégrées dans les sols, les plafonds et les murs - Détermination de l'emission thermique

La présente Norme européenne s'applique aux systèmes de surfaces chauffantes et rafraîchissantes intégrées dans le sol, les plafonds et les murs d'une pièce devant être chauffée ou rafraîchie. La partie 5 de la présente norme européenne traite du recalcul des valeurs déterminées dans la partie 2 de la présente norme européenne pour le système en question, utilisé dans des applications de chauffage par le sol. La méthode de recalcul décrite dans cette partie de la présente norme européenne permet de convertir les résultats de calcul et d’essai de la partie 2 en résultats pour des surfaces orientés différemment, telles que les plafonds et les murs chauffants, ainsi que pour les applications de surfaces rafraîchissantes, telles que les systèmes rafraîchissants par le sol, les plafonds ou les murs. Les résultats d’essai de la partie 2 de la présente norme européenne constituent les données de base de tous les calculs. L’utilisation de cette méthode de démonstration est donc nécessaire, que le système en question soit ou non utilisé en chauffage ou en rafraîchissement.
Commercialement et techniquement, la présente norme doit être appliquée si les valeurs d'émissions thermiques doivent être éprouvées et certifiées.

Ploskovni sistemi za gretje in hlajenje z vodo - 5. del: Grelne in hladilne površine, vgrajene v tla, strop ali stene - Ugotavljanje oddaje toplote

General Information

Status
Withdrawn
Publication Date
20-Nov-2008
Withdrawal Date
13-Jun-2021
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
07-Jun-2021
Due Date
30-Jun-2021
Completion Date
14-Jun-2021

Relations

Buy Standard

Standard
EN 1264-5:2009
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ploskovni sistemi za gretje in hlajenje z vodo - 5. del: Grelne in hladilne površine, vgrajene v tla, strop ali stene - Ugotavljanje oddaje toploteRaumflächenintegrierte Heiz und Kühlsysteme mit Wasserdurchströmung - Teil 5: Heiz­ und Kühlflächen in Fußböden, Decken und Wänden - Bestimmung der Wärmeleistung und der KühlleistungSystèmes de surfaces chauffantes et refraîchissantes hydrauliques intégrées - Partie 5: Surfaces chauffantes et refraîchissantes intégrées dans les sols, les plafonds et les murs - Détermination de l'emission thermiqueWater based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output91.140.10Sistemi centralnega ogrevanjaCentral heating systemsICS:Ta slovenski standard je istoveten z:EN 1264-5:2008SIST EN 1264-5:2009en,fr,de01-januar-2009SIST EN 1264-5:2009SLOVENSKI
STANDARD



SIST EN 1264-5:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1264-5October 2008ICS 91.140.10 English VersionWater based surface embedded heating and cooling systems -Part 5: Heating and cooling surfaces embedded in floors,ceilings and walls - Determination of the thermal outputSystèmes de surfaces chauffantes et refraîchissanteshydrauliques intégrées - Partie 5: Surfaces chauffantes etrefraîchissantes intégrées dans les sols, les plafonds et lesmurs - Détermination de l'emission thermiqueRaumflächenintegrierte Heiz
und Kühlsysteme mitWasserdurchströmung - Teil 5: Heiz- und Kühlflächen inFußböden, Decken und Wänden - Bestimmung derWärmeleistung und der KühlleistungThis European Standard was approved by CEN on 13 September 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1264-5:2008: ESIST EN 1264-5:2009



EN 1264-5:2008 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative References.5 3 Definitions and symbols.5 4 Calculation method.5 5 Prove report.6 Annex A (normative) Figures and tables.8 Annex B (informative) Explanations concerning the specification of the heat exchange coefficients of Table A.1.11 Bibliography.12
SIST EN 1264-5:2009



EN 1264-5:2008 (E) 3 Foreword This document (EN 1264-5:2008) has been prepared by Technical Committee CEN/TC 130 “Space heating appliances without integral heat sources”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by April 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This draft European Standard, Water based surface embedded heating and cooling systems, consists of the following parts: • Part 1: Definitions and symbols • Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods • Part 3: Dimensioning • Part 4: Installation • Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls — Determination of the thermal output According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 1264-5:2009



EN 1264-5:2008 (E) 4
Introduction This draft European Standard is based on the realisation that in the field of commercial trade the thermal output of heating and cooling systems represents the basis of rating. In order to be able to evaluate and compare different heating and cooling systems, it is, therefore, necessary to refer to values determined using one single, unambiguously defined method. The basis for doing so are the prove methods for the determination of the thermal output of floor heating systems described in Part 2 of this European Standard. In analogy to the European Standard EN 442-2 (Radiators and convectors — Part 2: Test methods and rating), this prove method provides characteristic partial load curves under defined boundary conditions as well as the characteristic output of the system represented by the standard thermal output together with the associated standard temperature difference between the heating medium and the room temperature. SIST EN 1264-5:2009



EN 1264-5:2008 (E) 5
1 Scope This European Standard applies to water based heating and cooling systems embedded into the enclosure surfaces of the room to be heated or to be cooled. Part 5 of this standard deals with the recalculation of values determined in Part 2 of this European Standard for the system in question, using it for floor heating applications. The recalculation method described in this part of the standard enables the conversion of the calculation and test results of Part 2 into results for other surface orientations in the room, i.e. for ceiling and wall heating, as well as for the application as cooling surfaces, i.e. for floor, ceiling and wall cooling. It has to be emphasised that the test results of Part 2 of this European Standard are the basis of all calculation. Therefore the use of this prove method is necessary whether or not the system in question is used for heating or cooling application. This European Standard shall be applied to commercial trade and practical engineering if proved and certifiable values of the thermal output shall be used.
2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.