SIST EN 60730-2-11:2008
(Main)Automatic electrical controls for household and similar use -- Part 2-11: Particular requirements for energy regulators
Automatic electrical controls for household and similar use -- Part 2-11: Particular requirements for energy regulators
This clause of Part 1 is applicable except as follows: In general, this part of IEC 60730 applies to energy regulators for use in, on, or in association with equipment for household and similar use, including energy regulators for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof. These energy regulators may be thermally, mechanically or electrically operated. This standard applies to the inherent safety, to the operating values, operating times and operating sequence where such are associated with equipment safety, and to the testing of automatic electrical energy regulator devices used in, or in association with, household or similar equipment. This standard is also applicable to energy regulators for appliances within the scope of IEC 60335-1. Throughout this standard the word "equipment" means "appliance and equipment". This standard does not apply to automatic electrical energy regulators designed exclusively for industrial applications. This standard is also applicable to individual energy regulators utilized as part of a control system or energy regulators which are mechanically integral with multi-functional controls having non-electrical outputs. Energy regulators for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.
Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche Anwendungen -- Teil 2-11: Besondere Anforderungen an Energieregler
Dispositifs de commande électrique automatiques à usage domestique et analogue -- Partie 2-11: Règles particulières pour les régulateurs d'énergie
En général, la présente partie de la CEI 60730 s'applique aux régulateurs d'énergie utilisés dans, sur ou en association avec un matériel à usage domestique ou analogue, y compris les régulateurs d'énergie pour le chauffage, le conditionnement d'air et les applications similaires. Le matériel peut utiliser l'électricité, le gaz, le pétrole, des combustibles solides, l'énergie thermique solaire, etc. ou une combinaison de ceux-ci.
Avtomatske električne krmilne naprave za uporabo v gospodinjstvu in za podobno uporabo - 2-11. del: Posebne zahteve za regulatorje energije (IEC 60730-2-11:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60730-2-11:2008
01-maj-2008
1DGRPHãþD
SIST EN 60730-2-11:1996
SIST EN 60730-2-11:1996/A1:1998
SIST EN 60730-2-11:1996/A11:2005
SIST EN 60730-2-11:1996/A2:1999
$YWRPDWVNHHOHNWULþQHNUPLOQHQDSUDYH]DXSRUDERYJRVSRGLQMVWYXLQ]DSRGREQR
XSRUDERGHO 3RVHEQH]DKWHYH]DUHJXODWRUMHHQHUJLMH ,(&
Automatic electrical controls for household and similar use - Part 2-11: Particular
requirements for energy regulators
Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche
Anwendungen - Teil 2-11: Besondere Anforderungen an Energieregler
Dispositifs de commande électrique automatiques à usage domestique et analogue -
Partie 2-11: Règles particulières pour les régulateurs d'énergie
Ta slovenski standard je istoveten z: EN 60730-2-11:2008
ICS:
97.120
SIST EN 60730-2-11:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 60730-2-11
NORME EUROPÉENNE
February 2008
EUROPÄISCHE NORM
ICS 97.120 Supersedes EN 60730-2-11:1993 + A1:1997 + A2:1998 + A11:2005
English version
Automatic electrical controls for household and similar use -
Part 2-11: Particular requirements for energy regulators
(IEC 60730-2-11:2006)
Dispositifs de commande électrique Automatische elektrische Regel- und
automatiques à usage domestique Steuergeräte für den Hausgebrauch
et analogue - und ähnliche Anwendungen -
Partie 2-11: Règles particulières Teil 2-11: Besondere Anforderungen
pour les régulateurs d'énergie an Energieregler
(CEI 60730-2-11:2006) (IEC 60730-2-11:2006)
This European Standard was approved by CENELEC on 2007-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60730-2-11:2008 E
---------------------- Page: 2 ----------------------
EN 60730-2-11:2008 - 2 -
Foreword
The text of the International Standard IEC 60730-2-11:2006, prepared by IEC TC 72, Automatic controls
for household use, was submitted to the formal vote and was approved by CENELEC as EN 60730-2-11
on 2007-10-01 without any modification.
This European Standard supersedes EN 60730-2-11:1993 (+ corr. July 1997) + A1:1997
(+ corr. July 1997) + A2:1998 + A11:2005.
It incorporates amended requirements for electronic controls in Annex H.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-10-01
national standard or by endorsement
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-10-01
This Part 2-11 is to be used in conjunction with EN 60730-1:2000 + A1:2004, Automatic electrical controls
for household and similar use – Part 1: General requirements, and any subsequent amendments.
This Part 2-11 supplements or modifies the corresponding clauses in EN 60730-1 so as to convert that
publication into the European Standard: Particular requirements for energy regulators.
Where this Part 2-11 states "addition", "modification" or "replacement", the relevant requirement, test
specification or explanatory matter in Part 1 shall be adapted accordingly.
Where no change is necessary, this Part 2-11 indicates that the relevant clause or subclause applies.
In this publication, the following print types are used:
– Requirements proper: in roman type.
– Test specifications: in italic type.
– Explanatory matter: in smaller roman type.
Subclauses or figures which are additional to those in Part 1 are numbered starting from 101.
__________
Endorsement notice
The text of the International Standard IEC 60730-2-11:2006 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
NORME CEI
INTERNATIONALE
IEC
60730-2-11
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2006-10
Dispositifs de commande électrique
automatiques à usage domestique et analogue –
Partie 2-11:
Règles particulières pour les régulateurs d’énergie
Automatic electrical controls
for household and similar use –
Part 2-11:
Particular requirements for energy regulators
© IEC 2006 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
M
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 4 ----------------------
60730-2-11 © IEC:2006 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
AUTOMATIC ELECTRICAL CONTROLS FOR
HOUSEHOLD AND SIMILAR USE –
Part 2-11: Particular requirements for energy regulators
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60730-2-11 has been prepared by IEC technical committee 72:
Automatic controls for household use.
This second edition cancels and replaces the first edition published in 1993, Amendment 1
(1994) and Amendment 2 (1997). This second edition constitutes a technical revision, which
incorporates amended requirements for electronic controls in Annex H.
---------------------- Page: 5 ----------------------
60730-2-11 © IEC:2006 – 5 –
The text of this standard is based upon the following documents:
FDIS Report on voting
72/712/FDIS 72/725/RVD
Full information on the voting for the approval of this part can be found in the report on voting
indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
This Part 2-11 is intended to be used in conjunction with IEC 60730-1. It was established on
the basis of the third edition of that standard (1999) and its Amendment 1 (2003).
Consideration may be given to future editions of, or amendments to, IEC 60730-1.
This Part 2-11 supplements or modifies the corresponding clauses in IEC 60730-1 so as to
convert that publication into the IEC standard: Particular requirements for energy regulators.
Where this Part 2-11 states "addition", "modification" or "replacement", the relevant
requirement, test specification or explanatory matter in Part 1 should be adapted accordingly.
Where no change is necessary, this Part 2-11 indicates that the relevant clause or subclause
applies.
In this publication, the following print types are used:
– Requirements proper: in roman type.
– Test specifications: in italic type.
– Explanatory matter: in smaller roman type.
Subclauses or figures which are additional to those in Part 1 are numbered starting from 101.
A list of all parts of the IEC 60730 series, under the general title Automatic electrical controls for
household and similar use, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
---------------------- Page: 6 ----------------------
60730-2-11 © IEC:2006 – 7 –
AUTOMATIC ELECTRICAL CONTROLS FOR
HOUSEHOLD AND SIMILAR USE –
Part 2-11: Particular requirements for energy regulators
1 Scope and normative references
This clause of Part 1 is applicable except as follows:
1.1 Replacement:
In general, this part of IEC 60730 applies to energy regulators for use in, on, or in association
with equipment for household and similar use, including energy regulators for heating, air
conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel,
solar thermal energy, etc. or a combination thereof.
These energy regulators may be thermally, mechanically or electrically operated.
1.1.1 Replacement:
This standard applies to the inherent safety, to the operating values, operating times and
operating sequence where such are associated with equipment safety, and to the testing of
automatic electrical energy regulator devices used in, or in association with, household or
similar equipment.
This standard is also applicable to energy regulators for appliances within the scope of
IEC 60335-1.
Throughout this standard the word “equipment” means “appliance and equipment”.
This standard does not apply to automatic electrical energy regulators designed exclusively
for industrial applications.
This standard is also applicable to individual energy regulators utilized as part of a control
system or energy regulators which are mechanically integral with multi-functional controls
having non-electrical outputs.
Energy regulators for equipment
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.