oSIST prEN 3480:2020

Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Plate - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 Mpa

Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) - Lufterschmolzen - Weichgeglüht - Platten - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa

Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Élaboré à l'air - Adouci - Plaques - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa

Le présent document spécifie les exigences relatives à :
Acier X6CrNiTi18-10 (1.4541)
Élaboré à l’air
Adouci
Plaques
6 mm < a ≤ 50 mm
500 MPa ≤ Rm ≤ 700 MPa
pour applications aérospatiales.
W.nr : 1.4541.
Désignation ASD-STAN : FE-PA3601.

Aeronavtika - Jeklo X6CrNiTi18-10 (1.4541) - Taljeno na zraku - Popuščano - Plošča - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 Mpa

General Information

• Status: Not Published
• Public Enquiry End Date: 30-Nov-2020
• ICS: 49.025.10 - Steels
• ICS: 77.140.50 - Flat steel products and semi-products
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 17-Sep-2020
• Due Date: 04-Feb-2021
• Completion Date: 01-Dec-2020
• Ref Project: prEN 3480 - Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Plate - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 Mpa

Relations

• Revised: SIST EN 3480:2007 - Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Plate - 6 mm < a <= 50 mm - 500 MPa <= Rm <= 700 MPa
• Effective Date: 11-Dec-2018
• Revised: SIST EN 3480:2007 - Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Plate - 6 mm < a <= 50 mm - 500 MPa <= Rm <= 700 MPa
• Effective Date: 18-Jan-2023
• Revised: SIST EN 3480:2007 - Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Plate - 6 mm < a <= 50 mm - 500 MPa <= Rm <= 700 MPa
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3480:2020
01-november-2020
Aeronavtika - Jeklo X6CrNiTi18-10 (1.4541) - Taljeno na zraku - Popuščano - Plošča
- 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 Mpa
Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Plate - 6 mm
< a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 Mpa
Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) - Lufterschmolzen - Weichgeglüht -
Platten - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa
Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Élaboré à l'air - Adouci - Plaques - 6
mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa
Ta slovenski standard je istoveten z: prEN 3480
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
oSIST prEN 3480:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3480:2020

---------------------- Page: 2 ----------------------
oSIST prEN 3480:2020


DRAFT
EUROPEAN STANDARD
prEN 3480
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2020
ICS Will supersede EN 3480:2007
English Version

Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air
melted - Softened - Plate - 6 mm < a ≤ 50 mm - 500 MPa ≤
Rm ≤ 700 Mpa
Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) -
Élaboré à l'air - Adouci - Plaques - 6 mm < a ≤ 50 mm - Lufterschmolzen - Weichgeglüht - Platten - 6 mm < a ≤
500 MPa ≤ Rm ≤ 700 MPa 50 mm - 500 MPa ≤ Rm ≤ 700 MPa
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3480:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3480:2020
prEN 3480:2020 (E)
Contents Page

European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9



2

---------------------- Page: 4 ----------------------
oSIST prEN 3480:2020
prEN 3480:2020 (E)
European foreword
This document (prEN 3480:2020) has been prepared by the Aerospace and Defence Industries Association of
Europe — Standardi
...