SIST EN 12595:2023
(Main)Bitumen and bituminous binders - Determination of kinematic viscosity
Bitumen and bituminous binders - Determination of kinematic viscosity
This document specifies a method for the determination of the kinematic viscosity of bituminous binders at 60 °C and 135 °C, in a range from 6 mm2/s to 300 000 mm2/s. Other temperatures are possible if calibration constants are known. Bituminous emulsions are not covered within the scope of this method.
Results for this method can be used to calculate dynamic viscosity when the density of the test material is known or can be determined.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to identify the hazards and assess the risks involved in performing this test method and to implement sufficient control measures to protect individual operators (and the environment). This includes appropriate safety and health practices and determination of the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der kinematischen Viskosität
Dieses Dokument legt ein Verfahren zur Bestimmung der kinematischen Viskosität von bitumenhaltigen Bindemitteln bei 60 °C und 135 °C in einem Bereich von 6 mm2/s bis 300 000 mm2/s fest. Andere Temperaturen sind möglich, sofern Kalibrierungskonstanten bekannt sind. Dieses Verfahren gilt nicht für Bitumenemulsionen.
Die nach diesem Verfahren erhaltenen Ergebnisse können zur Berechnung der dynamischen Viskosität verwendet werden, wenn die Dichte des Prüfmaterials bekannt ist oder bestimmt werden kann.
WARNUNG - Die Anwendung dieses Dokuments kann den Umgang mit gefährlichen Substanzen und Ausrüstungsteilen und die Ausführung gefährlicher Arbeitsgänge einschließen. Dieses Dokument erhebt nicht den Anspruch, alle mit seiner Anwendung verbundenen Sicherheitsprobleme anzusprechen. Es liegt in der Verantwortung des Anwenders dieses Dokuments, die Gefahren zu identifizieren und die mit der Durchführung der Prüfung verbundenen Risiken zu beurteilen sowie geeignete Kontrollmaßnahmen zu implementieren, um den Ausführenden (und die Umwelt) zu schützen. Dies beinhaltet einen angemessenen Arbeits- und Gesundheitsschutz sowie die Klärung vor der Anwendung, ob einschränkende Vorschriften zu berücksichtigen sind.
Bitumes et liants bitumineux - Détermination de la viscosité cinématique
Le présent document prescrit une méthode de détermination de la viscosité cinématique de liants bitumineux à 60 °C et 135 °C, dans l'intervalle de 6 mm2/s à 300 000 mm2/s. D’autres températures sont possibles si les constantes de calibration sont connues. Le domaine d’application de la présente méthode ne comprend pas les émulsions bitumineuses.
Les résultats de la présente méthode peuvent être utilisés pour calculer la viscosité dynamique quand la masse volumique du matériau d'essai est connue ou peut être déterminée.
AVERTISSEMENT — L'utilisation de ce document implique l'intervention de produits, d'opérations et d'équipements à caractère dangereux. Le présent document n'est pas censé aborder tous les problèmes de sécurité concernés par son usage. Il incombe à son utilisateur d'identifier les dangers et d'évaluer les risques liés à l'application de cette méthode d'essai et de mettre en œuvre des mesures de prévention pour protéger les opérateurs (et l'environnement). Cela passe entre autre par l’’établissement de règles d'hygiène et de sécurité appropriées et la détermination de l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določanje kinematične viskoznosti
Ta dokument določa metodo za določanje kinematične viskoznosti bitumenskih veziv pri temperaturi 60 °C in 135 °C v razponu od 6 mm2/s do 300.000 mm2/s. Druge temperature so možne, če so poznane kalibracijske konstante. Bitumenske emulzije niso zajete v tej metodi.
Rezultati te metode se lahko uporabijo za izračun dinamične viskoznosti, kadar je gostota preskusnega materiala poznana ali jo je mogoče določiti.
OPOZORILO: Pri uporabi tega dokumenta so lahko prisotni nevarni materiali, postopki in oprema. Ta dokument ne obravnava vseh varnostnih težav, ki se navezujejo na njegovo uporabo. Uporabnik tega dokumenta je odgovoren za prepoznavanje nevarnosti in oceno tveganj, povezanih z izvajanjem te preskusne metode, ter za izvajanje zadostnih nadzornih ukrepov za zaščito posameznih operaterjev (in okolja). To vključuje ustrezne varnostne in zdravstvene prakse ter določitev uporabnosti regulativnih omejitev pred uporabo.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12595:2023
01-november-2023
Nadomešča:
SIST EN 12595:2014
Bitumen in bitumenska veziva - Določanje kinematične viskoznosti
Bitumen and bituminous binders - Determination of kinematic viscosity
Bitumen und bitumenhaltige Bindemittel - Bestimmung der kinematischen Viskosität
Bitumes et liants bitumineux - Détermination de la viscosité cinématique
Ta slovenski standard je istoveten z: EN 12595:2023
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 12595:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12595:2023
---------------------- Page: 2 ----------------------
SIST EN 12595:2023
EN 12595
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2023
EUROPÄISCHE NORM
ICS 75.140; 91.100.50 Supersedes EN 12595:2014
English Version
Bitumen and bituminous binders - Determination of
kinematic viscosity
Bitumes et liants bitumineux - Détermination de la Bitumen und bitumenhaltige Bindemittel -
viscosité cinématique Bestimmung der kinematischen Viskosität
This European Standard was approved by CEN on 28 May 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12595:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12595:2023
EN 12595:2023 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 6
5 Apparatus . 6
6 Preparation of test samples . 8
7 Procedure . 8
7.1 Test conditions . 8
7.2 Determination and measurement . 9
8 Calculation . 9
9 Expression of results . 10
10 Precision . 10
10.1 Repeatability .
...
SLOVENSKI STANDARD
oSIST prEN 12595:2022
01-februar-2022
Bitumen in bitumenska veziva - Določanje kinematične viskoznosti
Bitumen and bituminous binders - Determination of kinematic viscosity
Bitumen und bitumenhaltige Bindemittel - Bestimmung der kinematischen Viskosität
Bitumes et liants bitumineux - Détermination de la viscosité cinématique
Ta slovenski standard je istoveten z: prEN 12595
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
oSIST prEN 12595:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12595:2022
---------------------- Page: 2 ----------------------
oSIST prEN 12595:2022
DRAFT
EUROPEAN STANDARD
prEN 12595
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2021
ICS 75.140; 91.100.50 Will supersede EN 12595:2014
English Version
Bitumen and bituminous binders - Determination of
kinematic viscosity
Bitumes et liants bitumineux - Détermination de la Bitumen und bitumenhaltige Bindemittel -
viscosité cinématique Bestimmung der kinematischen Viskosität
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 336.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12595:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12595:2022
prEN 12595:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 5
5 Apparatus . 5
6 Preparation of test samples . 6
7 Procedure . 6
7.1 Test conditions . 6
7.2 Determination and measurement . 7
8 Calculation . 8
9 Expression of res
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.