iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1432:2000

(Main)

Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions

Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions

This European standard specifies the main dimensional and design characteristics, ratings, test methods, and operational requirements of swap tanks to be used within domestic and international multimodal traffic by road, rail, short sea, inland waterways, Ro/Ro or ferry transport. Swap tanks are not intended for intercontinental deep-sea traffic.

Wechselbehälter - Wechseltanks - Maße, Anforderungen, Prüfverfahren, Betriebsbedingungen

Diese Europäische Norm legt die grundsätzlichen Masse und Konstruktionsmerkmale, Gesamtgewichte, Prüfverfahren und Anforderungen an den Betrieb von Wechseltanks fest, die im nationalen und im internationalen kombinierten Verkehr zur Strasse und Schiene eingesetzt werden sowie auf See- Kurzstrecken, Binnenwasserstrassen, Ro/Ro- oder Fährverkehrsstrecken. Wechseltanks sind nicht vorgesehen für den internationalen Hochseeverkehr.

Caisses mobiles - Caisses mobiles citernes - Dimensions, prescriptions, méthodes d'essai, conditions d'exploitation

La présente norme spécifie les principales caractéristiques dimensionnelles et de conception, ainsi que les masses brutes maximales, les méthodes d'essais et les prescriptions d'exploitation des caisses mobiles citernes a utiliser en trafic intermodal intérieur et international routier, ferroviaire, maritime court, fluvial intérieur, RORO et sur ferry-boat. De telles caisses mobiles citernes ne sont pas normalement prévues pour le transport maritime intercontinental de haute mer.

Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions

General Information

Status
Published
Publication Date
30-Nov-2000
ICS
55.180.10 - General purpose containers
Technical Committee
SS SPL - Technical Board for the general field
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2000
Due Date
01-Dec-2000
Completion Date
01-Dec-2000
Ref Project
EN 1432:1997 - Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions

Buy Standard

EN 1432:2000EN 1432:2000
PreviousNext
Standard
EN 1432:2000
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Swap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditionsWechselbehälter - Wechseltanks - Maße, Anforderungen, Prüfverfahren, BetriebsbedingungenCaisses mobiles - Caisses mobiles citernes - Dimensions, prescriptions, méthodes d'essai, conditions d'exploitationSwap bodies - Swap tanks - Dimensions, requirements, test methods, operation conditions55.180.10General purpose containersICS:Ta slovenski standard je istoveten z:EN 1432:1997SIST EN 1432:2000en01-december-2000SIST EN 1432:2000SLOVENSKI
STANDARD



SIST EN 1432:2000



SIST EN 1432:2000



SIST EN 1432:2000



SIST EN 14
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 284:2007(Main)
Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements
EN 284:2006

This European Standard specifies basic requirements for non-stackable swap bodies of class C, having a gross mass of not more than 16 t.
NOTE 1   "Swap bodies of class C" means that they are equipped with bottom fittings positioned according to the specification for 1 C (20') ISO containers (see ISO 668).
NOTE 2   Stackable swap bodies class C are specified in CEN/TS 13853.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 14993:2005(Main)
Swap bodies for combined transport - Stackable swap bodies type A 1371 - Dimensions, design requirements and testing
CEN/TS 14993:2005

This document specifies dimensions, design requirements and testing requirements of stackable swap bodies type A 1371 which are suitable for domestic and European multimodal conveyance by road, rail, short sea and coastal sea transport (including Ro/Ro or ferry transport) and inland waterways.

  • Technical specification
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 13853:2004(Main)
Swap bodies for combined transport - Stackable swap bodies type C 745-S16 - Dimensions, design requirements and testing
CEN/TS 13853:2003

This Technical Specification specifies dimensions, design requirements and testing requirements of stackable swap bodies of type C 745-S16 which are suitable for domestic and international multimodal conveyance by road, rail, short sea and coastal sea transport (including Ro/Ro or ferry transport) and inland waterways.

  • Technical specification
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 452:2000(Main)
Swap bodies - Swap bodies of Class A - Dimensions and general requirements
EN 452:1995

This European Standard specifies the dimensions and basic requirements for swap bodies of class A, which are designed as totally enclosed types e.g. box types, or as open types e.g. platform without or with cover/stake. These swap bodies are suitable for international exchange and for conveyance by road and rail including interchange between these forms of transport. Note: Class A means that all swap bodies having this designation are equipped with bottom fittings positioned according to the specification for 1A (40') ISO-Containers

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12406:2000(Main)
Swap bodies - Thermal swap bodies of Class C - Dimensions and general requirements
EN 12406:1999

This European standard specifies the dimensions and basic requirements for thermal swap bodies of class C. These swap bodies are suitable for international exchange and for conveyance by road and rail including interchange between these forms of transport.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12410:2000(Main)
Swap bodies - Thermal swap bodies of Class A - Dimensions and general requirements
EN 12410:1999

This European standard specifies the dimensions and basic requirements for thermal swap bodies of class A. These swap bodies are suitable for international exchange and for conveyance by road and rail including interchange between these forms of transport.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 283:2000(Main)
Swap bodies - Testing
EN 283:1991

This European Standard lays down the basic testing requirements for swap bodies of class A, B and C, which are suitable for conveyance by road and rail vehicles, including interchange between these modes of transport. This standard does not apply to specific cargo swap bodies (e.g. tank type swap bodies).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10374:2000(Main)
Freight containers - Automatic identification (ISO 10374:1991, including Amendment 1:1995)
EN ISO 10374:1997

Specifies all necessary user requirements. Includes: a container idenfication system, data coding systems, description of data, performance criteria and security features. Annex A forms an integral part of this standard. Annex B is for information only.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6346:2022(Main)
Freight containers - Coding, identification and marking (ISO 6346:2022, Corrected version 2022-08)
EN ISO 6346:2022

1.1 This document provides a system for the identification and presentation of information about
freight containers. The identification system is intended for general application, for example in
documentation, control and communications (including automatic data processing systems), as well as
for display on the containers themselves.
The methods of displaying identification and certain other data (including operational data) on
containers by means of permanent marks are included.
1.2 This document specifies:
a) a container identification system, with an associated system for verifying the accuracy of its use,
having:
— mandatory marks for the presentation of the identification system for visual interpretation,
and
— features to be used in optional Automatic Equipment Identification (AEI) and electronic data
interchange (EDI);
b) a coding system for data on container size and type, with corresponding marks for their display;
c) operational marks, both mandatory and optional;
d) physical presentation of marks on the container.
1.3 The terms “mandatory” and “optional” in this document are used to differentiate those ISO
marking provisions which shall necessarily be fulfilled by all containers from those which are not
required of all containers. The optional marks are included to further comprehension and promote
uniform application of the optional mark. If a choice has been made to display an optional mark, the
provisions laid down in this document relating to the mark shall be applied. The terms “mandatory”
and “optional” do not refer to requirements of any regulatory body.
1.4 This document applies to all freight containers covered by International Standards ISO 668, parts
1 to 5 of ISO 1496, ISO 8323 and should, wherever appropriate and practicable, be applied:
— to containers other than those covered by the International Standards mentioned in Clause 2;
— to container-related and/or detachable equipment.
NOTE 1 Containers marked according to previous editions of ISO 6346 need not be re-marked.
1.5 This document does not cover temporary operational marks of any kind, permanent marks,
data plates, etc. which may be required by intergovernmental agreements, national legislation or
nongovernmental organizations.
NOTE 2 Some of the major international conventions whose container-marking requirements are not covered
in this document are as follows:
— International Convention for Safe Containers (1972, as amended) (CSC), International Maritime Organization
(IMO);
— Customs Convention on Containers 1956 and 1972, related to temporary admission and transport under
customs seal.
— Convention on Temporary Admission (Istanbul, 26 June 1990), related to temporary admission.
It should not be assumed that this list is exhaustive.
This document does not cover the display of technical data on tank containers (see ISO 1496-3), nor
does it, in any way, include identification marks or safety signs for items of cargo which may be carried
in freight containers.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12641-1:2020(Main)
Intermodal loading units and commercial vehicles - Tarpaulins - Part 1: Minimum requirements
EN 12641-1:2019

This document specifies minimum requirements for the strength and attachment of tarpaulins used on swap bodies and utility vehicles for road and road/rail combined (intermodal transport) traffic.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day