oSIST prEN 12697-32:2013

Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor

This European Standard describes a test method for the preparation of bituminous test specimens using a vibratory compaction technique. The test specimens can include compaction with a vibratory slab compactor from which smaller samples can be cored if required.
This European Standard is applicable to loose mixtures and cores and is used to establish a reference density for a bituminous mixture in accordance with the procedures described in prEN 13108-20, or the ease of compaction as described in EN 12697-10.

Asphalt - Prüfverfahren für Heißasphalt - Teil 32: Laborverdichtung von Asphalt mit einem Vibrationsverdichter

Diese Europäische Norm beschreibt ein Prüfverfahren zur Herstellung von Asphalt-Probekörpern mit Hilfe einer Vibrationsverdichtungstechnik. Die Probekörper können durch Verdichtung mit einem Vibrationsplatten-verdichter hergestellt werden, und falls erforderlich können daraus durch Kernbohren kleinere Probekörper ausgebohrt werden.
Diese Europäische Norm gilt sowohl für loses Mischgut als auch für Bohrkerne und ist bei der Bestimmung einer Bezugsdichte für einen gegebenen Asphalt nach einem der in prEN 13108 20 beschriebenen Verfahren oder bei der Bestimmung der Verdichtbarkeit nach EN 12697 10 anzuwenden.

Matériaux enrobés - Méthodes d'essai pour enrobés à chaud - Partie 32 : Compactage en laboratoire de mélanges bitumineux par compacteur vibratoire

La présente Norme européenne décrit une méthode d’essai pour la préparation d’éprouvettes bitumineuses
utilisant une technique de compactage vibratoire. Les éprouvettes peuvent inclure un compactage par un
compacteur vibratoire de plaque à l’aide duquel des éprouvettes plus petites peuvent être prélevées si
nécessaire.
Cette Norme européenne s’applique aux carottes et aux mélanges foisonnés et est utilisée afin de déterminer
une masse volumique de référence pour un mélange bitumineux conformément aux modes opératoires
décrits dans le prEN 13108-20 ou la compactabilité comme décrit dans l’EN 12697-10.

Bitumenske zmesi - Preskusne metode za vroče asfaltne zmesi - 32. del: Laboratorijska zgostitev bitumenskih zmesi z vibracijskim zgoščevalnikom

General Information

• Status: Not Published
• Public Enquiry End Date: 14-Jan-2014
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CES - Roads
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 06-Mar-2017
• Due Date: 11-Mar-2017
• Completion Date: 06-Mar-2017
• Ref Project: prEN 12697-32 rev - Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor

Relations

• Revised: SIST EN 12697-32:2004+A1:2007 - Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
• Effective Date: 01-Dec-2013
• Revised: SIST EN 12697-32:2004+A1:2007 - Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
• Effective Date: 18-Jan-2023
• Revised: SIST EN 12697-32:2004+A1:2007 - Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
• Effective Date: 19-Jan-2023
• Revised: SIST EN 12697-32:2004+A1:2007 - Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 12697-32:2013
01-december-2013
%LWXPHQVNH]PHVL3UHVNXVQHPHWRGH]DYURþHDVIDOWQH]PHVLGHO
/DERUDWRULMVND]JRVWLWHYELWXPHQVNLK]PHVL]YLEUDFLMVNLP]JRãþHYDOQLNRP
Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction
of bituminous mixtures by vibratory compactor
Asphalt - Prüfverfahren für Heißasphalt - Teil 32: Laborverdichtung von Asphalt mit
einem Vibrationsverdichter
Matériaux enrobés - Méthodes d'essai pour enrobés à chaud - Partie 32 : Compactage
en laboratoire de mélanges bitumineux par compacteur vibratoire
Ta slovenski standard je istoveten z: prEN 12697-32 rev
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 12697-32:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12697-32:2013

---------------------- Page: 2 ----------------------
oSIST prEN 12697-32:2013


EUROPEAN STANDARD
DRAFT
prEN 12697-32 rev
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2013
ICS Will supersede EN 12697-32:2003+A1:2007
English Version
Bituminous mixtures - Test methods for hot mix asphalt - Part
32: Laboratory compaction of bituminous mixtures by vibratory
compactor
Matériaux enrobés - Méthodes d'essai pour enrobés à Asphalt - Prüfverfahren für Heißasphalt - Teil 32:
chaud - Partie 32 : Compactage en laboratoire de Laborverdichtung von Asphalt mit einem
mélanges bitumineux par compacteur vibratoire Vibrationsverdichter
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 227.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12697-32 rev:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12697-32:2013
prEN 12697-32:2013 (E)
Contents
Page
Foreword .3
1 Scope .6
2 Normative references .6
3 Terms and definitions .6
4 Principle .7
5 Materials .7
6 Apparatus .7
7 Preparation of test specimens .8
7.1 Core Specimens .8
7.2 Plant-mixed materials .9
7.3 Laboratory-mixed materials .9
8 Calculation and expression of results .9
9 Test report .9
10 Precision .9
Annex A (normative) Test method for determining the suitability of a vibrating hammer for
laboratory compaction . 11
A.1 Principle . 11
A.2 Apparatus . 11
A.3 Materials . 11
A.4 Preparation of sample . 11
A.5 Procedure . 11
A.6 Calculation and expression of results . 12
A.7 Calibration certificate . 13
Bibliography . 14


2

---------------------- Page: 4 ----------------------
oSIST prEN 12697-32:2013
prEN 12697-32:2013 (E)
Foreword
This document (prEN 12697-32:2013) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12697-32:2003+A1:2007.
The following is a list of significant technical changes since the previous edition:
 The scope includes compaction with a vibratory slab compactor;
 EN 1097-5 replaces EN 12697-14 for water content;
 the compaction time is limited to 4 min;
 corrections to the key to Figure 2.
This European Standard is one of a series of standards as follows:
EN 12697-1, Bituminous mixtures — Test methods for hot mix asphalt — Part 1: Soluble binder content
EN 12697-2, Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle size
distribution
EN 12697-3, Bituminous mixtures — Test methods for hot mix asphalt — Part 3: Binder recovery: Rotary
evaporator
EN 12697-4, Bituminous mixtures — Test methods for hot mix asphalt — Part 4: Binder recovery:
Fractionating column
EN 12697-5, Bituminous mixtures — Test methods for hot mix asphalt — Part 5: Determination of the
maximum density
EN 12697-6, Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density
of bituminous specimen
EN 12697-7, Bituminous mixtures — Test methods for hot mix asphalt — Part 7: Determination of bulk density
of bituminous specimens by gamma rays
EN 12697-8, Bituminous mixtures — Test methods for hot mix asphalt — Part 8: Determination of void
characteristics of bituminous specimens
EN 12697-10, Bituminous mixtures — Test methods for hot mix asphalt — Part 10: Compactibility
EN 12697-11, Bituminous mixtures — Test methods for hot mix asphalt — Part 11: Determination of the
affinity between aggregate and binder
EN 12697-12, Bituminous mixtures — Test methods for hot mix asphalt — Part 12: Determination of the water
sensitivity of bituminous specimens
3

---------------------- Page: 5 ----------------------
oSIST prEN 12697-32:2013
prEN 12697-32:2013 (E)
EN 12697-13, Bituminous mixtures — Test methods for hot mix asphalt — Part 13: Temperature
measurement
EN 12697-14, Bituminous mixtures — Test methods for hot mix asphalt — Part 14: Water content
EN 12697-15, Bituminous mixtures — Test methods for hot mix asphalt — Part 15: Determination of the
segregation sensitivity
EN 12697-16, Bituminous mixtures — Test methods for hot mix asphalt — Part 16: Abrasion by studded tyres
EN 12697-17, Bituminous mixtures — Test methods for hot mix asphalt — Part 17: Particle loss of porous
asphalt specimen
EN 12697-18, Bituminous mixtures — Test methods for hot mix asphalt — Part 18: Binder drainage
EN 12697-19, Bituminous mixtures — Test methods for hot mix asphalt — Part 19: Permeability of specimen
EN 12697-20, Bituminous mixtures — Test methods for hot mix asphalt — Part 20: Indentation using cube or
cylindrical specimen
EN 12697-21, Bituminous mixtures — Test methods for hot mix asphalt — Part 21: Indentation using plate
specimens
EN 12697-22, Bituminous mixtures — Test methods for hot mix asphalt — Part 22: Wheel tracking
EN 12697-23, Bituminous mixtures — Test methods for hot mix asphalt — Part 23: Determination of the
indirect tensile strength of bituminous specimens
EN 12697-24, Bituminous mixtures — Test methods for hot mix asphalt — Part 24: Resistance to fatigue
EN 12697-25, Bituminous mixtures — Test methods for hot mix asphalt — Part 25: Cyclic compression test
EN 12697-26, Bituminous mixtures — Test methods for hot mix asphalt — Part 26: Stiffness
EN 12697-27, Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling
EN 12697-28, Bituminous mixtures — Test methods for hot mix asphalt — Part 28: Preparation of samples for
determining binder content, water content and grading
EN 12697-29, Bituminous mixtures — Test methods for hot mix asphalt — Part 29: Determination of the
dimensions of a bituminous specimen
EN 12697-30, Bituminous mixtures — Test methods for hot mix asphalt — Part 30 Specimen preparation by
impact compactor
EN 12697-31, Bituminous mixtures — Test methods for hot mix asphalt — Part 31: Specimen preparation by
gyratory compactor
EN 12697-32, Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory compaction of
bituminous mixtures by a vibratory compactor
EN 12697-33, Bituminous mixtures — Test methods for hot mix asphalt — Part 33: Specimen preparation by
roller compactor
EN 12697-34, Bituminous mixtures — Test methods for hot mix asphalt — Part 34: Marshall test
EN 12697-35, Bituminous mixtures — Test methods for hot mix asphalt — Part 35: Laboratory mixing
4

---------------------- Page: 6 ----------------------
oSIST prEN 12697-32:2013
prEN 12697-32:2013 (E)
EN 12697-36, Bituminous mixtures — Test methods for hot mix asphalt — Part 36: Determination of the
thickness of a bituminous pavement
EN 12697-37, Bituminous mixtures — Test methods for hot mix asphalt — Part 37: Hot sand test for the
adhesivity of binder on precoated chippings for HRA
EN 12697-38, Bituminous mixtures — Test methods for hot mix asphalt — Part 38: Common equipment and
calibration
EN 12697-39, Bituminous mixtures — Test methods for hot mix asphalt — Part 39: Binder content of by
ignition
EN 12697-40, Bituminous mixtures — Test methods for hot mix asphalt — Part 40: In situ drainability
EN 12697-41, Bituminous mixtures — Test methods for hot mix asphalt — Part 41: Resistance to deicing
fluids
EN 12697-42, Bituminous mixtures — Test methods for hot mix asphalt — Part 42: Amount of coarse foreign
matters in reclaimed asphalt
EN 12697-43, Bituminous mixtures — Test methods for hot mix asphalt — Part 43: Resistance to fuel
EN 12697-44, Bituminous mixtures — Test methods for hot mix asphalt — Part 44: Crack propagation by
semi-circular bending test
EN 12697-45, Bituminous mixtures — Test methods for hot mix asphalt — Part 45: Saturation ageing tensile
stiffness (SATS) conditioning test
EN 12697-46, Bituminous mixtures — Test methods for hot mix asphalt — Part 46: Low temperature cracking
and properties by uniaxial tension tests
EN 12697-47, Bituminous mixtures — Test methods for hot mix asphalt — Part 47: Determination of the ash
content of natural asphalt
prEN 12697-48, Bituminous mixtures — Test methods for hot mix asphalt — Part 48: Inter-layer bond
1)
strength
prEN 12697-49, Bituminous mixtures — Test methods for hot mix asphalt — Part 49: Determination of friction
1)
after polishing
prTS 12697-50, Bituminous mixtures — Test methods for hot mix asphalt — Part 50: Scuffing resistance of
1)
surface course
The applicability of this European Standard is described in the product standards for bituminous mixtures.
Annex A is normative.

1) In preparation
5

---------------------- Page: 7 ----------------------
oSIST prEN 12697-32:2013
prEN 12697-32:2013 (E)
1 Scope
This European Standard describes a test method for the preparation of bituminous test specimens using a
vibratory compaction technique. The test specimens can include compaction with a vibratory slab compactor
from which smaller samples can be cored if required.
This European Standard is applicable to loose mixtures and cores and is used to establish a reference density
for a bituminous mixture in accordance with the procedures described in prEN 13108-20, or the ease of
compaction as described in EN 12697-10.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 1097-5, Test for mechanical and physical properties of aggregates – Determination of water content by
drying in a ventilated oven
EN
...