iTeh Standards logo
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60079-1:2015/AC:2018

(Corrigendum)

Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" (IEC 60079-1:2014/COR1:2018)

Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" (IEC 60079-1:2014/COR1:2018)

IEC - Corrected version

Explosionsgefährdete Bereiche - Teil 1: Geräteschutz durch druckfeste Kapselung "d" (IEC 60079-1:2014/COR1:2018)

Atmosphères explosives - Partie 1: Protection du matériel par enveloppes antidéflagrantes "d" (IEC 60079-1:2014/COR1:2018)

Eksplozivne atmosfere - 1. del: Zaščita opreme z neprodirnim okrovom "d" - Popravek AC (IEC 60079-1:2014/COR1:2018)

General Information

Status
Published
Publication Date
15-Nov-2018
ICS
29.260.20 - Electrical apparatus for explosive atmospheres
Technical Committee
EXP - Product for explosive atmospheres
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
19-Sep-2018
Due Date
24-Nov-2018
Completion Date
16-Nov-2018
Directive
2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
2014/32/EU - Directive 2014/32/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of measuring instruments
2014/34/EU - Directive 2014/34/EU Of The European Parliament And Of The Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (recast)
Ref Project
EN 60079-1:2014/AC:2018-09 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

Relations

Corrects
SIST EN 60079-1:2015 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
Effective Date
10-Jul-2018
SIST EN 60079-1:2015/AC:2018SIST EN 60079-1:2015/AC:2018
PreviousNext
Corrigendum
SIST EN 60079-1:2015/AC:2018
English and French language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosionsgefährdete Bereiche - Teil 1: Geräteschutz durch druckfeste Kapselung "d" (IEC 60079-1:2014/COR1:2018)Atmosphères explosives - Partie 1: Protection du matériel par enveloppes antidéflagrantes "d" (IEC 60079-1:2014/COR1:2018)Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" (IEC 60079-1:2014/COR1:2018)29.260.20Electrical apparatus for explosive atmospheresICS:Ta slovenski standard je istoveten z:EN 60079-1:2014/AC:2018-09SIST EN 60079-1:2015/AC:2018en,fr01-december-2018SIST EN 60079-1:2015/AC:2018SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 60079-1:2014/AC:2018-09
September 2018
ICS 29.260.20 English Version
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" (IEC 60079-1:2014/COR1:2018)
Atmosphères explosives - Partie 1: Protection du matériel par enveloppes antidéflagrantes "d" (IEC 60079-1:2014/COR1:2018)
Explosionsgefährdete Bereiche - Teil 1:
Geräteschutz durch druckfeste Kapselung "d" (IEC 60079-1:2014/COR1:2018) This corrigendum becomes effective on 7 September 2018 for incorporation in the English language version of the EN. European Committee for Elec
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

Frequently Asked Questions

SIST EN 60079-1:2015/AC:2018 is a corrigendum published by the Slovenian Institute for Standardization (SIST). Its full title is "Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" (IEC 60079-1:2014/COR1:2018)". This standard covers: IEC - Corrected version

IEC - Corrected version

SIST EN 60079-1:2015/AC:2018 is classified under the following ICS (International Classification for Standards) categories: 29.260.20 - Electrical apparatus for explosive atmospheres. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 60079-1:2015/AC:2018 has the following relationships with other standards: It is inter standard links to SIST EN 60079-1:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

SIST EN 60079-1:2015/AC:2018 is associated with the following European legislation: EU Directives/Regulations: 2008/68/EC, 2014/32/EU, 2014/34/EU. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

You can purchase SIST EN 60079-1:2015/AC:2018 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.

This May Also Interest You

SIST
SIST EN IEC 60079-19:2025(Main)
Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation (IEC 60079-19:2025)
EN IEC 60079-19:2025

IEC 60079-19:2025 applies to service facilities and covers only those factors related to overhaul, repair or reclamation of Ex Equipment specifically designed for hazardous areas, where the hazard is caused by explosive atmospheres. Ex Equipment can be overhauled, repaired or reclaimed to mitigate deficiencies identified during operation, inspection and maintenance.
It does not include:
• advice on cable and wiring systems which can require a renewal when the equipment is re-installed;
• Repair or overhaul of Type of Protection “m”;
• Repair or overhaul of Ex Components;
• Requirements for manufacturers who overhaul and repair equipment which they have manufactured
This fifth edition cancels and replaces the fourth edition published in 2019. This edition constitutes a technical revision.
Users of this document are advised that interpretation sheets clarifying the interpretation of this document can be published. Interpretation sheets are available from the IEC webstore and can be found in the “history” tab of the page for each document.
The significance of changes between IEC 60079-19, Edition 5 (2025) and IEC 60079-19, Edition 4 (2019) are as listed in the foreword of this standard.

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60079-45:2025(Main)
Explosive atmospheres - Part 45: Electrical ignition systems for internal combustion engines (IEC 60079-45:2025)
EN IEC 60079-45:2025

IEC 60079-45:2025 is intended to enhance the safety of personnel by providing minimum requirements for electrical ignition systems for spark-ignited reciprocating internal combustion engines, parts of which provide Equipment Protection Level (EPL) Gc.
This document provides minimum construction and test requirements, in addition to manufacturer installation and maintenance recommendations, for the safe operation of ignition systems and components for spark-ignited reciprocating internal combustion engines providing EPL Gc for equipment Group IIB+H2, IIB or IIA. These requirements apply to systems rated for normal operation with secondary voltages less than or equal to 60 kV.
This document applies only to the ignition systems or the individual ignition system components used on reciprocating internal combustion engines that are stationary when in operation and mobile machinery where the internal combustion engine can be potential source of ignition. Applications addressed by the scope of this document include but are not limited to gas compressors, electric power generators, forklift trucks, and pumps.
This document does not apply to:
a) Engine ignition systems that utilize a breaker point or magneto type ignition systems as these would not be suitable for use in a hazardous area.
b) Road vehicles.
c) Low voltage parts and electrical installation that are not included in the ignition system, such as various sensors and thermocouples, throttle actuator(s), fuel control valve(s), human machine interface (HMI), respective harness and wiring and all the other items that might belong to the integrated control system besides the ignition system.
This document supplements and modifies the general requirements of IEC 60079-0 and the requirements of ISO/IEC 80079-41. Where a requirement of this document conflicts with IEC 60079 0 or ISO/IEC 80079-41, the requirement of this document takes precedence.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60079-18:2025(Main)
Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" (IEC 60079-18:2025)
EN IEC 60079-18:2025

IEC 60079-18:2025 gives the specific requirements for the construction, testing and marking of electrical Ex Equipment, parts of electrical Ex Equipment and Ex Components with the Type of Protection encapsulation "m" (hereinafter referred to as "m" Equipment) intended for use in explosive gas atmospheres or explosive dust atmospheres. For Levels of Protection "mb" and "mc", this document applies where the rated voltage does not exceed 11 kV ACRMS or DC. For Level of Protection "ma", this document applies where the rated voltage does not exceed 1 kV ACRMS or DC. This document does not take account of any hazard due to an emission of flammable or toxic gas from the dust. This document supplements and modifies the general requirements of IEC 60079-0. Where a requirement of this document conflicts with a requirement of IEC 60079-0, the requirement of this document takes precedence. This fifth edition cancels and replaces the fourth edition published in 2014 and Amendment 1:2017. This edition constitutes a technical revision. This International Standard is to be used in conjunction with IEC 60079-0, Explosive atmospheres - Part 0: Equipment - General requirements. Users of this document are advised that interpretation sheets clarifying the interpretation of this document can be published. Interpretation sheets are available from the IEC webstore and can be found in the "history" tab of the page for each document. Please see the foreword to this document for the list of significant technical changes with respect to the previous edition.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60079-11:2025(Main)
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" (IEC 60079-11:2023 + COR1:2023)
EN IEC 60079-11:2024

This part of IEC 60079 specifies the construction and testing of intrinsically safe apparatus intended for use in an explosive atmosphere, and for associated apparatus which is intended for connection to intrinsically safe circuits which enter such atmospheres.
This Type of Protection is applicable to electrical equipment in which the electrical circuits themselves are incapable of causing ignition of a surrounding explosive atmosphere. This includes electrical equipment which contains circuits that are intrinsically safe only under certain conditions, for example under battery supply with mains supply removed.
This standard is also applicable to electrical equipment or parts of electrical equipment located outside the explosive atmosphere or protected by another Type of Protection listed in IEC 60079-0, where the intrinsic safety of the electrical circuits in the explosive atmosphere may depend upon the design and construction of such electrical equipment or parts of such electrical equipment. The electrical circuits exposed to the explosive atmosphere are assessed for use in such an atmosphere by applying this standard.
This standard applies to sensors connected to intrinsically safe circuits but does not apply to the protection of catalytic elements for Group IIC or Group IIB + H2.
The requirements for intrinsically safe systems are provided in IEC 60079-25.
This standard supplements and modifies the general requirements of IEC 60079-0, except as indicated in Table 1. Where a requirement of this standard conflicts with a requirement of IEC 60079-0, the requirement of this standard takes precedence.
Unless otherwise stated, the requirements in this standard are applicable to both intrinsically safe apparatus and associated apparatus, and the generic term "apparatus" is used throughout the standard.
As this standard applies only to electrical equipment, the term "equipment" used in the standard always means “electrical equipment”.
This standard applies to apparatus for use under the atmospheric conditions of IEC 60079-0 with additional requirements for for use at lower atmospheric pressures in the range from 60 kPa (0,6 bar), up to 110 kPa (1,1 bar).
[...]

  • Standard
    222 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-5:2015/A1:2025(Amendment)
Explosive atmospheres - Part 5: Equipment protection by powder filling "q" (IEC 60079-5:2015/AMD1:2022)
EN 60079-5:2015/A1:2024

No scope available

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50176:2025(Main)
Automatic electrostatic application systems for ignitable liquid coating materials - Safety requirements
EN 50176:2025

1.1   This document specifies the electrical requirements for the design of automatic electrostatic application systems for liquid coating materials which can be ignited in an atomised state, used within a temperature range from 5 °C to 40 °C.
This document considers automatic electrostatic application systems for processing ignitable liquid coating materials, where the conductivity of the complete system is limited up to 50 nS/cm. Together with additional measures like e.g. potential separation systems, these requirements can also be applied to ignitable liquid coating materials, where the conductivity of the complete system is limited up to 2 000 μS/cm.
Ignition hazards related to the generated explosive atmosphere and the protection of persons against electric shock are considered.
1.2   This document specifies
-   requirements for an interface to machinery according to EN 16985:2018,
-   additional requirements for machinery covered by EN 1953:2025 and EN 12621:2025.
1.3   This document also specifies requirements for a safe operation of electrostatic application systems, including the electrical installation. The requirements consider both the processing of coating materials and the cleaning and purge processes.
1.4   This document applies to three types of spraying systems; see 5.1.1.
Spraying systems are classified as equipment of group II, category 2G (for intended use in zone 1 or zone 2) or category 3G (for intended use in zone 2).
Only electrostatic spraying systems operating with a d.c. sinusoidal ripple of not more than 10 % of the r.m.s. value are considered.
1.5   For electrostatic application systems used in food and pharmaceutical industry, additional requirements may apply.
1.6   This document does not apply to
-   potential separation systems;
-   selection, installation and application of other electrical and non-electrical equipment in areas with explosion hazard, see EN 60079-14:2014 and EN 16985:2018;
-   quality assurance systems for electrostatic spraying equipment (see EN ISO/IEC 80079-34:2020, ZB.11).

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-6:2016/A1:2025(Amendment)
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" (IEC 60079-6:2015/A1:2020)
EN 60079-6:2015/A1:2024

NEXT ACTION: UNDER BT CONSULTATION SOON (finalization EN with revised Annex Z)
HAS CONSULTANT PUB ASSESSMENT BY 2020-09-24 -- non compliant assessment received
20200325: consultant assessment missing and Annex ZZ was not circulated at FV; document blocked until such a time as this can be resolved

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60079-14:2025(Main)
Explosive atmospheres - Part 14: Electrical installation design, selection and installation of equipment, including initial inspection (IEC 60079-14:2024)
EN IEC 60079-14:2024

IEC 60079:2024 contains the specific requirements for the design of electrical systems, selection, installation and the required initial inspection of electrical installations of Ex Equipment in, or associated with, explosive atmospheres including requirements for documentation and personnel competency.
These requirements are in addition to the requirements for installations in non-hazardous areas.
This document applies to all electrical Ex Equipment including fixed, transportable, portable and personal, and installations, permanent or temporary.
This document does not apply to:
• electrical installations in mines susceptible to firedamp;
• inherently explosive situations and dust from explosives or pyrophoric substances (for example explosives manufacturing and processing);
• rooms used for medical purposes;
• electrical installations in areas where the hazard is due to flammable mist; and
• installation of non-electrical Ex Equipment (unless being part of an equipment assembly according IEC TS 60079-46).
No account is taken in this document of the toxic hazards that are associated with flammable gases, liquids and dusts in concentrations that are usually very much less than the lower flammable limit. In locations where personnel could be exposed to potentially toxic concentrations of flammable material, appropriate precautions are necessary. Such precautions are outside the scope of this document.
This sixth edition cancels and replaces the fifth edition published in 2013. This edition constitutes a technical revision. Edition 6 is a major restructure and introduces a number of technical changes from the previous edition (2013), see Table 1 of the foreword for detailed information.

  • Standard
    149 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO/IEC 80079-49:2024(Main)
Explosive atmospheres - Part 49: Flame arresters - Performance requirements, test methods and limits for use (ISO/IEC 80079-49:2024)
EN ISO/IEC 80079-49:2024

This document specifies the requirements for flame arresters that prevent flame transmission when explosive gas-air or vapour-air mixtures are present. It establishes uniform principles for the classification, basic construction and information for use, including the marking of flame arresters, and specifies test methods to verify the safety requirements and determine safe limits of use. This document is applicable to pressures ranging from 80 kPa to 160 kPa and temperatures ranging from -20 °C to +200 °C. This document does not apply to the following: - external safety-related measurement and control equipment that might be required to keep the operational conditions within the established safe limits; - flame arresters used for explosive mixtures of vapours and gases, which tend to self-decompose (for example, acetylene) or which are chemically unstable; - flame arresters used for carbon disulfide, due to its special properties; - flame arresters whose intended use is for mixtures other than gas-air or vapour-air mixtures (for example, higher oxygen-nitrogen ratio, chlorine as oxidant); - flame arrester test procedures for reciprocating internal combustion engines; - fast acting valves, extinguishing systems and other explosion isolating systems; - Flame arresters used in gas detectors (those being covered for example, by IEC 60079‑29‑1 and IEC 62990‑1). This edition cancels and replaces ISO 16852:2016, which has been technically revised. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to ISO 16852:2016: a) adaptation of the relevant IEC TC 31 requirements on standards; b) modification of the upper limit of the temperature range from 150 °C to 200 °C under the condition that T0 shall be not larger than 80 % of the auto ignition temperature of the gas-air-mixture; c) change of the term "explosion group" to "equipment group" due to editorial requirements in IEC/TC 31; d) clarification of the conditions and requirements for flame arresters whose intended operating conditions are outside the atmospheric conditions in 7.3.4 and 7.3.5; e) clarification of the requirements on the information for use in Clause 12 f) concerning the burn time; f) addition of a permission to the construction requirements both in 7.1 and 14.1 to substitute visual inspection by performing a flow test; g) addition of a flow chart for the evaluation of test results as Annex D

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14986:2024(Main)
Design of fans working in potentially explosive atmospheres
EN 14986:2024

1.1   This document specifies the constructional requirements for fans constructed to Group II G (of explosion groups IIA, IIB and hydrogen) categories 1, 2 and 3, and Group II D categories 2 and 3, intended for use in explosive atmospheres.
NOTE 1   Operation conditions for the different categories of fans used in this document are defined in Clause 4.
1.3   This document specifies requirements for design, construction, testing and marking of complete fan units intended for use in potentially explosive atmospheres in air containing gas, vapour, mist and/or dusts. Such atmospheres can exist inside (the conveyed atmosphere (flammable or not)), outside, or inside and outside of the fan.
This document covers mechanical equipment, in particular fans. The “type of protection” as specified in EN ISO 80079 37:2016 is constructional safety.
1.4   This document is applicable to fans working in ambient atmospheres and with normal atmospheric conditions at the inlet, having
—   absolute pressures ranging from 0,8 bar to 1,1 bar,
—   and temperatures ranging from −20 °C to +60 °C,
—   and maximum volume fraction of 21 % oxygen content,
—   and an aerodynamic energy increase of less than 25 kJ/kg.
NOTE 1   25 kJ/kg is equivalent to 30 kPa at inlet density of 1,2 kg/m3.
This document can also be helpful for the design, construction, testing and marking of fans intended for use in atmospheres outside the validity range stated above or in cases where other material pairings need to be used. In this case, the ignition risk assessment, ignition protection provided, additional testing (if necessary), manufacturer's marking, technical documentation and instructions to the user, clearly demonstrate and indicate the equipment's suitability for the conditions the fan can encounter.
NOTE 2   Temperatures below −20 °C can be considered. Material suitability can require specific evaluation for these temperatures. With lower temperature the explosion pressure increases, which leads to increased test pressures (see A.3) and can require specific testing. Although the standard atmospheric conditions in EN ISO 80079 36:2016 give a temperature range for the atmosphere of −20 °C to +60 °C the normal ambient temperature range for the equipment is −20 °C to +40 °C unless otherwise specified and marked.
1.5   This document does not apply to:
—   group I fans (fans for mining);
—   explosion group IIC (other than hydrogen);
—   category 1D fans;
—   cooling fans or impellers on rotating electrical machines;
—   cooling fans or impellers on internal combustion engines, vehicles or electric motors.
NOTE 3   Measures for category 1D fans are given in EN 1127 1:2019.
NOTE 4   Measures for explosion group IIC (other than hydrogen) are given in EN 1127 1:2019.
NOTE 5   Measures for explosion group I are given in EN ISO/IEC 80079 38:2016 and EN 1127 2:2014.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day