Radio Equipment and Systems (RES); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement

To draft a European Telecommunications Standard (ETS) for equipment to be used in the maritime mobile service

Radijska oprema in sistemi (RES) – Radiotelefonski oddajniki in sprejemniki za pomorske mobilne storitve, ki obratujejo v pasovih VHF – Tehnične karakteristike in merilne metode

General Information

Status
Published
Publication Date
30-Nov-2003
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003

Buy Standard

Standard
ETS 300 162 E1:2003
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 162 E1:2003
01-december-2003
5DGLMVNDRSUHPDLQVLVWHPL 5(6 ±5DGLRWHOHIRQVNLRGGDMQLNLLQVSUHMHPQLNL]D
SRPRUVNHPRELOQHVWRULWYHNLREUDWXMHMRYSDVRYLK9+)±7HKQLþQHNDUDNWHULVWLNH
LQPHULOQHPHWRGH
Radio Equipment and Systems (RES); Radiotelephone transmitters and receivers for the
maritime mobile service operating in VHF bands; Technical characteristics and methods
of measurement
Ta slovenski standard je istoveten z: ETS 300 162 Edition 1
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
SIST ETS 300 162 E1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 162 E1:2003

---------------------- Page: 2 ----------------------

SIST ETS 300 162 E1:2003
EUROPEAN ETS 300 162
TELECOMMUNICATION October 1993
STANDARD
Source: ETSI TC-RES Reference: DE/RES-1002
ICS: 33.060
Maritime, radiotelephone, VHF
Key words:
Radio Equipment and Systems (RES);
Radiotelephone transmitters and receivers for the
maritime mobile service operating in the VHF bands
Technical characteristics and methods of measurement
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - secretariat@etsi.fr
X.400: Internet:
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1993. All rights reserved.
New presentation - see History box

---------------------- Page: 3 ----------------------

SIST ETS 300 162 E1:2003
Page 2
ETS 300 162: October 1993
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 162 E1:2003
Page 3
ETS 300 162: October 1993
Contents
Foreword .7
1 Scope .9
2 Normative references.9
3 General requirements .9
3.1 Construction.9
3.2 Controls and indicators .10
3.3 Handset and loudspeaker.11
3.4 Switching time.11
3.5 Safety precautions .12
3.6 Class of emission and modulation characteristics.12
3.7 Multiple watch facilities .12
3.7.1 Additional performance standards .12
3.7.2 Scanning characteristics .13
3.8 Facilities for DSC transmission and reception.14
3.9 Labelling.14
3.10 Warm up .14
4 Test conditions, power sources and ambient temperatures .15
4.1 Normal and extreme test conditions .15
4.2 Test power source .15
4.3 Normal test conditions .15
4.3.1 Normal temperature and humidity.15
4.3.2 Normal power sources .15
4.3.2.1 Mains voltage and frequency.15
4.3.2.2 Battery power source.15
4.3.2.3 Other power sources .15
4.4 Extreme test conditions .16
4.4.1 Extreme temperatures.16
4.4.2 Extreme values of test power sources .16
4.4.2.1 Mains voltage.16
4.4.2.2 Battery power source.16
4.4.2.3 Other power sources .16
4.5 Procedure for tests at extreme temperatures.16
4.6 Environmental tests .16
4.7 Extended usage tests .17
5 General conditions of measurement .17
5.1 Arrangements for test signals applied to the receiver input.17
5.2 Squelch.17
5.3 Normal test modulation.17
5.4 Artificial antenna .17
5.5 Arrangements for test signals applied to the transmitter input .17
5.6 Tests on equipment with a duplex filter .17
5.7 Test channels .18
5.8 Measurement uncertainty and interpretation of the measured results.18
5.8.1 Measurement uncertainty.18
5.8.2 Interpretation of the measurement results .18

---------------------- Page: 5 ----------------------

SIST ETS 300 162 E1:2003
Page 4
ETS 300 162: October 1993
6 Transmitter . 19
6.1 Frequency error. 19
6.1.1 Definition. 19
6.1.2 Method of measurement. 19
6.1.3 Limits . 19
6.2 Carrier power. 19
6.2.1 Definitions . 19
6.2.2 Method of measurement. 19
6.2.3 Limits . 19
6.2.3.1 Normal test conditions . 19
6.2.3.2 Extreme test conditions. 20
6.3 Frequency deviation .20
6.3.1 Definition. 20
6.3.2 Maximum permissible frequency deviation. 20
6.3.2.1 Method of measurement. 20
6.3.2.2 Limits. 20
6.3.3 Reduction of frequency deviation at modulation frequencies above 3 kHz . 20
6.3.3.1 Method of measurement. 20
6.3.3.2 Limits. 20
6.4 Limitation characteristics of the modulator. 21
6.4.1 Definition. 21
6.4.2 Method of measurement. 21
6.4.3 Limits . 21
6.5 Sensitivity of the modulator, including microphone . 21
6.5.1 Definition. 21
6.5.2 Method of measurement. 22
6.5.3 Limits . 22
6.6 Audio frequency response. 22
6.6.1 Definition. 22
6.6.2 Method of measurement. 22
6.6.3 Limit . 22
6.7 Audio frequency harmonic distortion of the emission. 22
6.7.1 Definition. 22
6.7.2 Method of measurement. 22
6.7.2.1 Normal test conditions . 22
6.7.2.2 Extreme test conditions. 22
6.7.3 Limits . 23
6.8 Adjacent channel power. 23
6.8.1 Definition. 23
6.8.2 Measurement. 23
6.8.2.1 Method of measurement. 23
6.8.2.2 Power measuring receiver specification . 23
6.8.2.2.1 IF filter . 24
6.8.2.2.2 Attenuation indicator. 25
6.8.2.2.3 RMS value indicator . 25
6.8.2.2.4 Oscillator and amplifier. 25
6.8.3 Limits . 25
6.9 Conducted spurious emissions conveyed to the antenna. 26
6.9.1 Definition. 26
6.9.2 Method of measurement. 26
6.9.3 Limit . 26
6.10 Cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna . 26
6.10.1 Definitions . 26
6.10.2 Method of measurement. 26
6.10.3 Limits . 26
6.11 Residual modulation of the transmitter. 27
6.11.1 Definition. 27
6.11.2 Method of measurement. 27
6.11.3 Limit . 27
6.12 Transient frequency behaviour of the transmitter. 27
6.12.1 Definitions . 27

---------------------- Page: 6 ----------------------

SIST ETS 300 162 E1:2003
Page 5
ETS 300 162: October 1993
6.12.2 Method of measurement .28
7 Receiver .31
7.1 Harmonic distortion and rated audio frequency output power .31
7.1.1 Definition .31
7.1.2 Methods of measurement .31
7.1.3 Limits.31
7.2 Audio frequency response .31
7.2.1 Definition .31
7.2.2 Method of measurement .32
7.2.3 Limits.32
7.3 Maximum usable sensitivity .32
7.3.1 Definition .32
7.3.2 Method of measurement .32
7.3.3 Limits.33
7.4 Co-channel rejection.33
7.4.1 Definition .33
7.4.2 Method of measurement .33
7.4.3 Limit.33
7.5 Adjacent channel selectivity.33
7.5.1 Definition .33
7.5.2 Method of measurement .33
7.5.3 Limits.34
7.6 Spurious response rejection .34
7.6.1 Definition .34
7.6.2 Method of measurement .34
7.6.3 Limit.34
7.7 Intermodulation response .34
7.7.1 Definition .34
7.7.2 Method of measurement .34
7.7.3 Limit.35
7.8 Blocking or desensitisation .35
7.8.1 Definition .35
7.8.2 Method of measurement .35
7.8.3 Limit.35
7.9 Spurious emissions.36
7.9.1 Definition .36
7.9.2 Method of measuring the power level .36
7.9.3 Method of measuring the effective radiated power .36
7.9.4 Limit.36
7.10 Amplitude response of the receiver limiter.36
7.10.1 Definition .36
7.10.2 Method of measurement .36
7.10.3 Limit.37
7.11 Receiver noise and hum level.37
7.11.1 Definition .37
7.11.2 Method of measurement .37
7.11.3 Limit.37
7.12 Squelch operation.37
7.12.1 Definition .37
7.12.2 Method of measurement .37
7.12.3 Limits.38
7.13 Squelch hysteresis.38
7.13.1 Definition .38
7.13.2 Method of measurement .38
7.13.3 Limit.38
7.14 Multiple watch characteristic.38

---------------------- Page: 7 ----------------------

SIST ETS 300 162 E1:2003
Page 6
ETS 300 162: October 1993
7.14.1 Definition. 38
7.14.2 Method of measurement. 39
7.14.3 Limits . 39
8 Duplex operation. 39
8.1 Receiver desensitisation with simultaneous transmission and reception. 39
8.1.1 Definition. 39
8.1.2 Method of measurement. 39
8.1.3 Limits . 40
8.2 Receiver spurious response rejection. 40
9 Interference. 40
9.1 General. 40
9.2 Conducted spurious emission into the mains. 40
9.2.1 Conditions of measurement. 40
9.2.2 Method of measurement. 40
9.2.3 Limits . 40
History. 42

---------------------- Page: 8 ----------------------

SIST ETS 300 162 E1:2003
Page 7
ETS 300 162: October 1993
Foreword
This European Telecommunication Standard (ETS) has been produced by the Radio Equipment and
Systems (RES) Technical Committee of the European Telecommunications Standards Institute (ETSI), and
was adopted, having passed through the ETSI standards approval procedure, (Public Enquiry 19:
1991-05-13 to 1991-10-04, Vote 27: 1992-09-21 to 1992-11-13).
This ETS lays down minimum requirements for VHF radio transmitters and receivers operating on board
ships in certain frequency bands allocated to the maritime mobile service, and incorporates the requirements
of the relevant recommendations of the International Maritime Organization.

---------------------- Page: 9 ----------------------

SIST ETS 300 162 E1:2003
Page 8
ETS 300 162: October 1993
Blank page

---------------------- Page: 10 ----------------------

SIST ETS 300 162 E1:2003
Page 9
ETS 300 162: October 1993
1 Scope
This ETS states the minimum requirements for VHF transmitters and receivers fitted with a 50 Ω external
antenna socket or connector for use on board ships and operating in the bands between 156 and 174 MHz
1)
allocated to the maritime mobile service by the Radio Regulations (see Radio Regulations, Appendices 18
[1] and 19 [2]). The relevant requirements detailed in the references in Clause 2, Normative References are
incorporated in this ETS.
2 Normative references
This ETS incorporates by dated or undated reference provisions from other publications. These normative
references are cited at the appropriate places in the text and the publications are listed hereafter. For dated
references, subsequent references to or revisions of any of these publications apply to this ETS only when
incorporated in it by amendment or revision. For undated references the latest edition of the publication
referred to applies.
[1] Radio Regulations, Appendix 18 (1990): "Table of Transmitting frequencies in
the band 156-174 MHz for Stations in the Maritime Mobile Service".
[2] Radio Regulations, Appendix 19 (1990): "Technical Characteristics for
Transmitters and Receivers used in the Maritime Mobile Service in the band
156-174 MHz".
[3] CCITT Recommendation E.161 (1988): "Arrangement of figures, letters and
symbols on telephones and other devices that can be used for access to a
telephone network".
[4] CEPT Recommendation T/R 34-01: "Specifications for Maritime Mobile Radio
equipment".
[5] CCITT Recommendation P.53 (1988): "Psophometric apparatus for the
objective measurement of circuit noise".
[6] International Convention on Safety of Life at Sea.
[7] CISPR Publication 16 (1987): "CISPR specification for radio interference
measuring apparatus and measuring methods".
[8] NMEA 0183 Version 2.00: "Standard for interfacing marine electronic devices".
3 General requirements
3.1 Construction
The mechanical and electrical construction and finish of the equipment shall conform in all respects to good
engineering practice, and the equipment shall be suitable for use on board ships.

1 )
Use in certain inland waterways may impose additional requirements.

---------------------- Page: 11 ----------------------

SIST ETS 300 162 E1:2003
Page 10
ETS 300 162: October 1993
All controls shall be of sufficient size to enable the usual control functions to be easily performed and the
number of controls should be the minimum necessary for simple and satisfactory operation.
All parts of the equipment to be checked during inspection or maintenance operations shall be readily
accessible. The components shall be readily identifiable.
Full technical documentation shall be supplied with the equipment.
The VHF maritime mobile service uses both single-frequency and two-frequency channels. For
two-frequency channels the Radio Regulations require a separation of 4,6 MHz between the transmitting
frequency and the receiving frequency.
The equipment shall be capable of operating on single frequency and two-frequency channels with manual
control (simplex). It may also be capable of operating on two-frequency channels without manual control
(duplex).
The equipment shall be able to operate on all channels defined in Appendix 18 to the Radio Regulations [1].
Operation on channels 75 and 76 shall be prevented by appropriate means. Additional VHF channels outside
those defined by Appendix 18 to the Radio Regulations [1] may also be provided, but means shall be
provided to block any or all of these additional channels, as may be required by an Administration, before
installation on board ships. It shall not be possible for the user to unblock or block these additional channels.
The equipment shall be so designed that use of channel 70 for purposes other than Digital Selective Calling
(DSC) is prevented.
It shall not be possible to transmit while any frequency syntheziser used within the transmitter is out of lock.
It shall not be possible to transmit during channel switching operations.
3.2 Controls and indicators
The equipment shall have a channel selector and shall indicate the designator, as shown in Appendix 18 to
the Radio Regulations [1], of the channel at which the installation is set. The channel designator shall be
legible irrespective of the external lighting conditions.
Where practicable, channels 16 and 70 should be distinctively marked. Selection of channel 16, and if
possible channel 70, shall preferably be by readily accessible means (e.g. a distinctively marked key). Where
an input panel on the equipment for entering the digits 0 - 9 is provided, this shall conform to CCITT
Recommendation E.161 [3].

---------------------- Page: 12 ----------------------

SIST ETS 300 162 E1:2003
Page 11
ETS 300 162: October 1993
The equipment shall have the following additional controls and indicators:
- on/off swi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.