oSIST prEN 12697-2:2023

Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution

This document specifies a procedure for the determination of the particle size distribution of the aggregates of bituminous mixtures by sieving. The test is applicable to aggregates recovered after binder extraction in accordance with EN 12697 1 or EN 12697 39.
NOTE   Fibres, solid (non-soluble during extraction) additives and (some) binder modifiers influence the test result.

Asphalt - Prüfverfahren - Teil 2: Korngrößenverteilung

Dieses Dokument legt ein Verfahren für die Bestimmung der Korngrößenverteilung der Gesteinskörnungen in Asphalt mittels Siebanalyse fest. Die Prüfung ist für Gesteinskörnungen, die nach Extraktion des Bindemittels nach EN 12697 1 oder EN 12697 39 rückgewonnen wurden, anwendbar.
ANMERKUNG   Fasern, feste Zusatzstoffe (die bei der Extraktion nicht in Lösung gehen) und (einige) Modifizierungs¬mittel für Bindemittel beeinflussen das Prüfergebnis.

Mélanges bitumineux - Méthodes d'essai - Partie 2 : Granulométrie

Le présent document spécifie un mode opératoire pour la détermination de la composition granulométrique des granulats dans les mélanges bitumineux, par tamisage. L’essai s’applique aux granulats récupérés après extraction du liant selon l’EN 12697 1 ou l’EN 12697 39.
NOTE   Les fibres, additifs solides (non solubles durant l’extraction) et (certains) modificateurs de liants influencent le résultat de l’essai.

Bitumenske zmesi - Preskusne metode - 2. del: Ugotavljanje zrnavosti

General Information

• Status: Not Published
• Public Enquiry End Date: 19-Dec-2023
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CES - Roads
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 09-Oct-2023
• Due Date: 26-Feb-2024
• Ref Project: prEN 12697-2 - Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution

Relations

• Replaces: SIST EN 12697-2:2015+A1:2019 - Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
• Effective Date: 12-Oct-2022

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 12697-2:2023
01-december-2023
Nadomešča:
SIST EN 12697-2:2015+A1:2019
Bitumenske zmesi - Preskusne metode - 2. del: Ugotavljanje zrnavosti
Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
Asphalt - Prüfverfahren - Teil 2: Korngrößenverteilung
Mélanges bitumineux - Méthodes d'essai - Partie 2 : Granulométrie
Ta slovenski standard je istoveten z: prEN 12697-2
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 12697-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12697-2:2023

---------------------- Page: 2 ----------------------
oSIST prEN 12697-2:2023


DRAFT
EUROPEAN STANDARD
prEN 12697-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2023
ICS 93.080.20 Will supersede EN 12697-2:2015+A1:2019
English Version

Bituminous mixtures - Test methods - Part 2:
Determination of particle size distribution
Mélanges bitumineux - Méthodes d'essai - Partie 2 : Asphalt - Prüfverfahren - Teil 2: Korngrößenverteilung
Granulométrie
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 227.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12697-2:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12697-2:2023
prEN 12697-2:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus . 6
6 Sample preparation . 6
7 Procedure . 6
8 Calculation . 6
9 Test report . 7
10 Precision .
...