SIST EN 2045:2004

Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm < a < 50 mm - Dimensions

This standard specifies the dimensions and tolerances of:
Square bars, drawn
in aluminium and aluminium alloys
Tolerance class h 11
Thickness 6 mm < a < 50 mm
for aerospace applications.

Luft- und Raumfahrt - Vierkantstangen, gezogen aus Aluminium und Aluminiumlegierungen - Toleranzklasse h 11 - Dicken 6 mm < a < 50 mm - Maße

Diese Norm legt die Maße und Toleranzen von
Vierkantstangen, gezogen
aus Aluminium und Aluminiumlegierungen
Toleranzklasse h 11
Dicken 6 mm < a < 50 mm
für die Luft- und Raumfahrt fest.

Série aérospatiale - Barres carrées, étirées en aluminium et alliages d'aluminium - Classe de tolérance h 11 - Épaisseurs 6 mm < a < 50 mm - Dimensions

La présente norme spécifie les dimensions et les tolérances des :
Barres carrées, étirées
en aluminium et alliages d'aluminium
Classe de tolérance h 11
Épaisseurs 6 mm < a < 50 mm
pour applications aérospatiales.

Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm < a < 50 mm - Dimensions

General Information

• Status: Published
• Publication Date: 30-Apr-2004
• ICS: 49.025.20 - Aluminium
• Technical Committee: I08 - Imaginarni 08
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-2004
• Due Date: 01-May-2004
• Completion Date: 01-May-2004
• Ref Project: EN 2045:2001 - Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm < a < 50 mm - Dimensions

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm < a < 50 mm - DimensionsLuft- und Raumfahrt - Vierkantstangen, gezogen aus Aluminium und Aluminiumlegierungen - Toleranzklasse h 11 - Dicken 6 mm < a < 50 mm - MaßeSérie aérospatiale - Barres carrées, étirées en aluminium et alliages d'aluminium - Classe de tolérance h 11 - Épaisseurs 6 mm < a < 50 mm - DimensionsAerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm < a < 50 mm - Dimensions49.025.20AluminijAluminiumICS:Ta slovenski standard je istoveten z:EN 2045:2001SIST EN 2045:2004en01-maj-2004SIST EN 2045:2004SLOVENSKI
STANDARD



SIST EN 2045:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2045December 2001ICS 49.025.20English versionAerospace series - Square bars, drawn in aluminuim andaluminium alloys - Tolerance class h 11 - Thickness 6 mm
a 50 mm - DimensionsSérie aérospatiale - Barres carrées, étirées en aluminiumet alliages d'aluminium - Classe de tolérance h 11 -Epaisseurs 6 mm
a
50 mm - DimensionsLuft- und Raumfahrt - Vierkantstangen, gezogen ausAluminium und Aluminiumlegierungen - Toleranzklasse h11 - Dicken 6 mm
a
50 mm - MaßeThis European Standard was approved by CEN on 2 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2045:2001 ESIST EN 2045:2004



EN 2045:2001 (E)2ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by June 2002, and conflicting national standards shall be withdrawn atthe latest by June 2002.Accord
...