SIST EN 2134:2004

Aerospace series - Round bars, extruded in aluminium and aluminium alloys - Diameter 10 mm < D < 220 mm - Dimensions

This standard specifies the dimensions and tolerances of:
Round bars, extruded
in aluminium and aluminium alloys
Diameter 10 mm < D < 220 mm
for aerospace applications.

Luft- und Raumfahrt - Rundstangen, gepresst aus Aluminium und Aluminiumlegierungen - Durchmesser 10 mm = D = 220 mm - Maße

Diese Norm legt die Maße und Toleranzen von:
Rundstangen, gepresst
aus Aluminium und Aluminiumlegierungen
Durchmesser 10 mm < D L 220 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Barres rondes, filées en aluminium et alliages d'aluminium - Diametres 10 mm < D < 220 mm - Dimensions

La présente norme spécifie les dimensions et les tolérances des :
Barres rondes, filées
en aluminium et alliages d'aluminium
Diametres 10 mm < D < 220 mm
pour applications aérospatiales.

Aerospace series - Round bars, extruded in aluminium and aluminium alloys - Diameter 10 mm < D < 220 mm - Dimensions

General Information

• Status: Published
• Publication Date: 30-Apr-2004
• ICS: 49.025.20 - Aluminium
• Technical Committee: I08 - Imaginarni 08
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-2004
• Due Date: 01-May-2004
• Completion Date: 01-May-2004
• Ref Project: EN 2134:2001 - Aerospace series - Round bars, extruded in aluminium and aluminium alloys - Diameter 10 mm < D < 220 mm - Dimensions

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Round bars, extruded in aluminium and aluminium alloys - Diameter 10 mm < D < 220 mm - DimensionsLuft- und Raumfahrt - Rundstangen, gepresst aus Aluminium und Aluminiumlegierungen - Durchmesser 10 mm = D = 220 mm - MaßeSérie aérospatiale - Barres rondes, filées en aluminium et alliages d'aluminium - Diametres 10 mm < D < 220 mm - DimensionsAerospace series - Round bars, extruded in aluminium and aluminium alloys - Diameter 10 mm < D < 220 mm - Dimensions49.025.20AluminijAluminiumICS:Ta slovenski standard je istoveten z:EN 2134:2001SIST EN 2134:2004en01-maj-2004SIST EN 2134:2004SLOVENSKI
STANDARD



SIST EN 2134:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2134December 2001ICS 49.025.20English versionAerospace series - Round bars, extruded in aluminium andaluminium alloys - Diameter 10 mm
D
220 mm - DimensionsSérie aérospatiale - Barres rondes, filées en aluminium etalliages d'aluminium - Diamètres 10 mm
D
220 mm -DimensionsLuft- und Raumfahrt - Rundstangen, gepreßt ausAluminium und Aluminiumlegierungen - Durchmesser 10mm
D
220 mm - MaßeThis European Standard was approved by CEN on 2 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2134:2001 ESIST EN 2134:2004



EN 2134:2001 (E)2ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by June 2002, and conflicting national standards shall be withdrawn atthe latest by June 2002.According to the CEN/CENELEC Internal Regulations, the national standards organi
...