SIST EN 60317-29:2001/A1:2002

Specifications for particular types of winding wires -- Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200

This amendment 1 is valid for the following parts of the IEC 60317: Part 2 (1990), Part 3 (1990), Part 4 (1990), Part 10 (1972), Part 12 (1990), Part 14 (1990), Part 15 (1990), Part 16 (1990), Part 17 (1990), Part 18 (1990), Part 19 (1990), Part 20 (1990), Part 21 (1990), Part 22 (1990), Part 23 (1990), Part 24 (1990), Part 26 (1990), Part 28 (1990), Part 29 (1990), Part 30 (1990), Part 35 (1992), Part 36 (1992), Part 37 (1992) and Part 38 (1992).

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten -- Teil 29: Flachdrähte aus Kupfer, lackisoliert mit Polyester oder Polyesterimid und darüber mit Polyamidimid, Klasse 200

Spécifications pour types particuliers de fils de bobinage -- Partie 29: Fil de section rectangulaire en cuivre émaillé avec polyester ou polyesterimide et avec surcouche polyamide-imide, classe 200

Cet amendement 1 est valable pour les parties suivantes de la CEI 60317: Partie 2 (1990), Partie 3 (1990), Partie 4 (1990), Partie 10 (1972), Partie 12 (1990), Partie 14 (1990), Partie 15 (1990), Partie 16 (1990), Partie 17 (1990), Partie 18 (1990), Partie 19 (1990), Partie 20 (1990), Partie 21 (1990), Partie 22 (1990), Partie 23 (1990), Partie 24 (1990), Partie 26 (1990), Partie 28 (1990), Partie 29 (1990), Partie 30 (1990), Partie 35 (1992), Partie 36 (1992), Partie 37 (1992) et Partie 38 (1992).

Specifications for particular types of winding wires – Part 29: Polyester or polyesterimide overcoated with polyamide–imide enamelled rectangular copper wire, class 200

General Information

• Status: Published
• Publication Date: 31-Mar-2002
• ICS: 29.060.10 - Wires
• Technical Committee: ETC - Electrotechnical technical committe
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Apr-2002
• Due Date: 01-Apr-2002
• Completion Date: 01-Apr-2002
• Ref Project: EN 60317-29:1996/A1:1998 - Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200

Relations

• Amends: SIST EN 60317-29:2001 - Specifications for particular types of winding wires -- Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
• Effective Date: 21-Sep-2010

Overview

EN 60317-29:1996/A1:1998 (CLC) specifies requirements for polyester or polyesterimide overcoated with polyamide‑imide enamelled rectangular copper wire, class 200. This European adoption/amendment aligns Part 29 of the IEC 60317 series with regional requirements and clarifies its applicability across multiple parts of the IEC 60317 family. The standard targets manufacturers, test laboratories and engineers working with enamelled magnet/winding wire for electrical windings.

Key topics and requirements

• Insulation system composition: Defines the enamel system as a base coat of polyester or polyesterimide with an overcoat of polyamide‑imide.
• Conductor form: Focuses on rectangular (flat) copper conductors intended for winding applications.
• Performance class: Identified as class 200, indicating the wire’s rated performance category for elevated operating conditions.
• Conformity with IEC 60317 series: Amendment A1 is explicitly valid for many parts of IEC 60317 (e.g., Parts 2, 3, 4, 10, 12, 14–24, 26, 28–30, 35–38), ensuring harmonized technical provisions across related winding‑wire types.
• Quality and testing principles: Establishes the expectation for standard mechanical, electrical and thermal performance assessments consistent with the IEC 60317 framework (e.g., insulation integrity, adhesion, thermal endurance, dimensional tolerances), while referencing the relevant test methods in the IEC parts listed.

Note: This summary describes the standard’s scope and topics; specific numerical limits, test procedures and acceptance criteria are contained in the full EN/IEC text.

Applications

• Electrical machine windings (motors, generators) where rectangular copper wire improves packing and slot fill.
• Transformers, inductors and chokes requiring compact, high‑performance enamelled wire.
• Power electronics and high‑temperature or high‑stress winding environments where polyamide‑imide overcoats provide enhanced thermal and mechanical resistance.
• Use cases demanding reliable insulation, good adhesion and consistent dimensional control for automated winding processes.

Who uses this standard

• Winding wire manufacturers for product specification and quality control.
• Design and electrical engineers specifying wire types for motor and transformer designs.
• Procurement and quality managers verifying supplier compliance to EN/IEC requirements.
• Test laboratories and certification bodies performing type approval and routine testing.

Related standards

• IEC 60317 series (multiple parts referenced by the amendment).
• Other national adoptions and CLC (European) documents that incorporate IEC 60317 content.

Keywords: EN 60317-29, 60317-29, winding wire, enamelled rectangular copper wire, polyesterimide, polyamide‑imide, class 200, magnet wire, CLC, IEC 60317.

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2002
Specifications for particular types of winding wires – Part 29: Polyester or
polyesterimide overcoated with polyamide–imide enamelled rectangular copper
wire, class 200
Specifications for particular types of winding wires -- Part 29: Polyester or polyesterimide
overcoated with polyamide-imide enamelled rectangular copper wire, class 200
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten -- Teil 29:
Flachdrähte aus Kupfer, lackisoliert mit Polyester oder Polyesterimid und darüber mit
Polyamidimid, Klasse 200
Spécifications pour types particuliers de fils de bobinage -- Partie 29: Fil de section
rectangulaire en cuivre émaillé avec polyester ou polyesterimide et avec surcouch
...