oSIST prEN ISO 8529-3:2024

Neutron reference radiation fields - Part 3: Calibration of area and personal dosemeters and determination of their response as a function of neutron energy and angle of incidence (ISO 8529-3:2023, including corrected version 2023-09)

This document provides guidance for those who calibrate protection-level dosemeters and doserate meters for area and individual monitoring with reference neutron radiation fields. This includes the determination of the response as a function of neutron energy and angle of incidence. The operational quantities recommended in ICRU Report 51 are considered. In addition to the description of procedures, this document includes appropriate definitions and conversion coefficients and provides guidance on the statement of measurement uncertainties.

Neutronen-Referenzstrahlungsfelder - Teil 3: Kalibrierung von Orts- und Personendosimetern und Bestimmung ihres Ansprechvermögens als Funktion der Neutronenenergie und des Einfallswinkels (ISO 8529-3:2023, einschließlich der korrigierten Fassung von 2023-09)

Champs de rayonnement neutronique de référence - Partie 3: Étalonnage des dosimètres de zone et individuels et détermination de leur réponse en fonction de l’énergie et de l’angle d’incidence des neutrons (ISO 8529-3:2023, y compris version corrigée 2023-09)

Referenčna polja nevtronskega sevanja - 3. del: Umerjanje površinskih in osebnih dozimetrov ter določanje njihovega odziva kot funkcije energije nevtronov in vpadnega kota (ISO 8529-3:2023, vključno s popravljeno različico 2023-09)

General Information

• Status: Not Published
• Public Enquiry End Date: 30-May-2024
• ICS: 17.240 - Radiation measurements
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 25-Mar-2024
• Due Date: 12-Aug-2024
• Completion Date: 03-Jun-2024
• Ref Project: EN ISO 8529-3:2024 - Neutron reference radiation fields - Part 3: Calibration of area and personal dosemeters and determination of their response as a function of neutron energy and angle of incidence (ISO 8529-3:2023, including corrected version 2023-09)

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2024
Referenčna polja nevtronskega sevanja - 3. del: Umerjanje površinskih in osebnih
dozimetrov ter določanje njihovega odziva kot funkcije energije nevtronov in
vpadnega kota (ISO 8529-3:2023, vključno s popravljeno različico 2023-09)
Neutron reference radiation fields - Part 3: Calibration of area and personal dosemeters
and determination of their response as a function of neutron energy and angle of
incidence (ISO 8529-3:2023, including corrected version 2023-09)
Champs de rayonnement neutronique de référence - Partie 3: Étalonnage des
dosimètres de zone et individuels et détermination de leur réponse en fonction de
l’énergie et de l’angle d’incidence des neutrons (ISO 8529-3:2023, y compris version
corrigée 2023-09)
Ta slovenski standard je istoveten z: prEN ISO 8529-3
ICS:
17.240 Merjenje sevanja Radiation measurements
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL ISO
STANDARD 8529-3
Second edition
2023-06
Corrected version
2023-09
Neutron reference radiation fields —
Part 3:
Calibration of area and personal
dosemeters and determination
of their response as a function of
neutron energy and angle of incidence
Champs de rayonnement neutronique de référence —
Partie 3: Étalonnage des dosimètres de zone et individuels et
détermination de leur réponse en fonction de l’énergie et de l’angle
d’incidence des neutrons
Reference number
ISO 8529-3:2023(E)
ISO 8529-3:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 8529-3:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Procedures applicable to area and personal dosemeters . 2
4.1 Neutron fields . 2
4.2 Conversion coefficients . 2
4.3 Determination of the response . 3
4.4 Calibration procedures . 3
5 Procedures for calibrating and determining the ambient dose equivalent response
of area dosemeters .4
5.1 Quantity to be measured and conversion coefficients . 4
5.2 Required response characteristics . 4
5.3 Dosemeter conditions . 4
5.4 Irradiation geometry . 4
5.5 Evaluation of measurement . 4
6 Procedures for calibrating and determining the personal dose equivalent response
of personal dosemeters . 5
6.1 Quantity to be measured and conversion coefficients . 5
6.2 Required response characteristics . 6
6.3 Calibration phantom . . 6
6.4 Dosemeter conditions . 6
6.5 Irradiation geometry . 6
6.6 Evaluation of measurement . 7
7 Uncertainty . 8
Annex A (informative) List of reference conditions and standard test conditions .9
Bibliography .10
iii
ISO 8529-3:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 85, Nuclear energy, nuclear technologies,
and radiological protection, Subcommittee SC 2, Radiation protection.
This second edition cancels and replaces the first edition (ISO 8529-3:1998), which has been technically
revised.
The main changes are as follows:
— The second and last edition of ISO 8529-1:2021 revised the neutron reference radiation fields
produced with radionuclide sources as well as those produced with monoenergetic neutrons,
thus requiring calculation of new conversion coefficients from neutron fluence to ambient dose
equivalent or personal dose equivalent.
A list of all parts in the ISO 8529 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
This corrected version of ISO 8529-3:2023 incorporates the following corrections:
-2 2
— The unit "pSv cm " was corrected to "pSv cm " in Tables 1 to 4.
iv
ISO 8529-3:2023(E)
Introduction
This document is closely related to ISO 8529-1 and ISO 8529-2 concerning the calibration of dosemeters
and doserate meters for neutron radiation. ISO 8529-1 specifies the reference neutron radiation fields,
in the energy range from thermal up to 20 MeV, and their production methods. ISO 8529-2 describes
the calibration fundamentals of radiation protection devices related to basic quantities characterising
the radiation field and specifies the procedures to be used for realising the calibration conditions
of radiation protection devices produced by calibration sources with emphasis on correction for
extraneous effects.
This document deals with dosemeters for area and individual monitoring. Unless differently specified,
the word "dosemeter" always refers to both. Area dosemeters are often called area monitors or area
survey meters, and dosemeters for individual monitoring are often called personal dosemeters or
personal dosimeters. This document describes procedures for calibrating and determining the response
in terms of the International Commission on Radiation Units and Measurements (ICRU) operational
[1] [2]
quantities. These are defined in ICRU Report 39 and ICRU Report51 . For radiation protection
purposes, these operational quantities are considered to be a sufficiently accurate approximation to
the protection quantities. For the purposes of this document, the emphasis will be on the evaluation
of the operational quantities at 10 mm depth defined in the body using conversion coefficients in
the appropriate phantom. Cold neutrons may present special problems in dosimetry and are outside
the scope of this document, as are the photon calibrations of instruments designed to measure both
photons and neutrons.
The determination of the response of dosemeters is essentially a three-step process. First, a primary
quantity such as the neutron fluence is determined at the point of test. Second, the reference point of
the device being calibrated is then placed at the point of test to determine the fluence response. Third,
the response of the device with respect to the appropriate operational quantity is then determined
by the application of conversion coefficients that relate the physical quantity (the fluence) to the
operational quantity (the dose equivalent). This document describes the methods and the conversion
coefficients to be used for the determination of the response of area and personal dosemeters in terms
of the respective ICRU operational quantities for neutrons.
v
INTERNATIONAL STANDARD ISO 8529-3:2023(E)
Neutron reference radiation fields —
Part 3:
Calibration of area and personal dosemeters and
determination of their response as a function of neutron
energy and angle of incidence
1 Scope
This document provides guidance for those who calibrate protection-level dosemeters and doserate
meters for area and individual monitoring with reference neutron radiation fields. This includes the
determination of the response as a function of neutron energy and angle of incidence. The operational
[2]
quantities recommended in ICRU Report 51 are considered. In addition to the description of
procedures, this document includes appropriate definitions and conversion coefficients and provides
guidance on the statement of measurement uncertainties.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 8529-1, Neutron reference radiations fields —
...