SIST EN 62002-2:2007

Mobile and portable DVB-T/H radio access -- Part 2: Interface conformance testing

This part of IEC 62002 provides the conformance testing rules and guidelines for equipment built to meet the mobile and portable DVB-T/H radio access interface specification (IEC 62002-1). The purpose of this standard is to limit the required test cases to a practical level. Nevertheless, the manufacturer is responsible for guaranteeing that the terminal fulfils the mobile and portable DVB-T/H radio access interface specification (IEC 62002-1) in all its aspects.

Mobiler und tragbarer Funkzugang zu DVB-T/H -- Teil 2: Konformitätsprüfung der Schnittstelle

Accès radio DVB-T/H vers les mobiles et les portables -- Partie 2 : Contrôles de conformité de l'interface

Mobilni in prenosni radijski dostop v sistemu DVB-T/H - 2. del: Preskušanje zmogljivosti vmesnika (IEC 62002-2:2005)

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-2006
• Withdrawal Date: 24-Sep-2008
• ICS: 33.170 - Television and radio broadcasting
• Technical Committee: AVM - Audio, video and multimedia systems and equipment
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 23-Sep-2008
• Due Date: 16-Oct-2008
• Completion Date: 25-Sep-2008
• Ref Project: EN 62002-2:2006 - Mobile and portable DVB-T/H radio access - Part 2: Interface conformance testing

Relations

• Replaced By: SIST EN 62002-2:2008 - Mobile and portable DVB-T/H radio access - Part 2: Interface conformance testing
• Effective Date: 29-Jan-2023
• Replaced By: SIST EN 62002-2:2008 - Mobile and portable DVB-T/H radio access - Part 2: Interface conformance testing
• Effective Date: 01-Nov-2008

Standards Content (Sample)

6/29(16., 6,67(1

67$1'$5'
MDQXDU
0RELOQLLQSUHQRVQLUDGLMVNLGRVWRSYVLVWHPX'9%7+GHO3UHVNXãDQMH
]PRJOMLYRVWLYPHVQLND,(&
LVWRYHWHQ(1
0RELOHDQGSRUWDEOH'9%7+UDGLRDFFHVV3DUW,QWHUIDFHFRQIRUPDQFHWHVWLQJ
,(&
,&6 5HIHUHQþQDãWHYLOND

6,67(1HQ
!"#$%&’( )&!*+,%- .

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 62002-2

NORME EUROPÉENNE
November 2006
EUROPÄISCHE NORM

ICS 33.170


English version


Mobile and portable DVB-T/H radio access
Part 2: Interface conformance testing
(IEC 62002-2:2005)


Accès radio DVB-T/H vers les mobiles  Mobiler und tragbarer Funkzugang
et les portables zu DVB-T/H
Partie 2 : Contrôles de conformité Teil 2: Konformitätsprüfung
de l'interface der Schnittstelle
(CEI 62002-2:2005) (IEC 62002-2:2005)




This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in two official versions (English and German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62002-2:2006 E

---------------------- Page: 2 ----------------------

EN 62002-2:2006 – 2 –
Foreword
The text of the International Standard IEC 62002-2:2005, prepared by IEC TC 100, Audio, video and
multimedia systems and equipment, was submitted to the formal vote and was approved by
CENELEC as EN 62002-2 on 2006-10-01 without any modification.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-10-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62002-2:2005 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

– 3 – EN 62002-2:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 62002-1 Mobile and portable DVB-T/H radio access - EN 62002-1 2006
–
Part 1: Interface specification
– – Digital Video Broadcasting (DVB); Framing ETSI EN 300 744 2004
structure, channel coding and modulation for (V1.5.1)
digital terrestrial television

———————
1)
Undated reference.

---------------------- Page: 4 ----------------------

INTERNATIONAL IEC


STANDARD 62002-2





First edition
2005-10


Mobile and portable DVB-T/H radio access –
Part 2:
Interface conformance testing

 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale W
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 5 ----------------------

– 2 – 62002-2  IEC:2005(E)
CONTENTS
FOREWORD.5

1 Scope.7
2 Normative references .7
3 Abbreviations .7
4 Test conditions .10
4.1 General test conditions.10
4.2 Terminal categories and summarized measurement conditions .10
4.3 Required equipment .11
4.4 Reference model and test point .11
4.5 Degradation criteria.12
4.6 Definition of C/N .14
4.7 Definition of measurement signals.14
5 C/N performance .16
5.1 Definition and applicability.16
5.2 Minimum requirements .16
5.3 Test purpose .17
5.4 Method of test .17
5.5 Test requirement .19
6 Receiver minimum and maximum input signal levels.19
6.1 Definition and applicability.19
6.2 Minimum requirements .19
6.3 Test purpose .20
6.4 Method of test .20
6.5 Test requirement .21
7 Immunity to analogue and/or digital signals in other channels.21
7.1 Definition and applicability.21
7.2 Minimum requirements .21
7.3 Test purpose .23
7.4 Method of test .23
7.5 Test requirement .27
8 Immunity to co-channel interference from analogue TV signals.27
8.1 Definition and applicability.27
8.2 Minimum requirements .27
8.3 Test purpose .28
8.4 Method of test .28
8.5 Test requirement .29
9 Guard interval utilization: echoes within guard interval .29
9.1 Definition and applicability.29
9.2 Minimum requirements .29
9.3 Test purpose .29
9.4 Method of test .29
9.5 Test requirement .30

---------------------- Page: 6 ----------------------

62002-2  IEC:2005(E) – 3 –
10 Guard interval utilization: echoes outside the guard interval .30
10.1 Definition and applicability.30
10.2 Minimum requirements .31
10.3 Test purpose .31
10.4 Method of test .32
10.5 Test requirement .32
11 Tolerance to impulse interference.33
11.1 Definition and applicability.33
11.2 Minimum requirements .33
11.3 Test purpose .34
11.4 Method of test .34
11.5 Test requirement .35

Bibliography.36

Figure 1 – Reference model.12
Figure 2 – PAL interfering signals .15
Figure 3 – SECAM L interfering signal .15
Figure 4. Example of a possible measurement setup in C/N performance tests. .18
Figure 5 – Example of a possible measurement setup in minimum and maximum
receiver signal input level tests.20
Figure 6 – Pattern S1: Wanted DVB-T channel with N + 1 or N – 1 analogue interferer.23
Figure 7 – Pattern S2: Wanted DVB-T channel with N + 1 or N – 1 digital DVB-T
interferer.24
Figure 8 – Pattern L1: Wanted DVB-T channel with one analogue signal on N + 4
channel and one digital DVB-T signal on N + 2 channel. .25
Figure 9 – Pattern L2: Wanted DVB-T channel with one analogue signal on N + 4
channel and another analogue signal on N + 2 channel.25
Figure 10 – Pattern L3: Wanted DVB-T signal with one digital DVB-T signal on N + 4
channel and another digital DVB-T signal on N + 2 channel. .26
Figure 11 – Example of a possible measurement setup in immunity to analogue and/or
digital signals in other channels test. .26
Figure 12 – Example of a possible measurement setup in immunity to co-channel
interference from analogue TV signals test. .28
Figure 13 – Example of a possible measurement setup in echoes within guard interval
test. .29
Figure 14 – Echo outside guard interval mask.31
Figure 15 – Example of a possible measurement setup in echoes outside guard
interval test.32
Figure 16 – Definition of the impulse interference test pattern.33
Figure 17 – Example of a possible measurement setup in impulse noise interference
test. .34

Table 1 – Valid conformance measurements for different terminal categories .10
Table 2 – Delta values between picture failure point and reference BER.13
Table 3 – C/N (dB) in Gaussian channel.16
Table 4 – C/N (dB) in portable channel.16

---------------------- Page: 7 ----------------------

– 4 – 62002-2  IEC:2005(E)
–4
Table 5 – C/N (dB) for PER = 1 × 10 in typical urban channel .17
Table 6 – C/N (dB) for MFER 5 % for DVB-H .17
Table 7 – Immunity to pattern S1 .21
Table 8 – Immunity to pattern S2 .22
Table 9 – Immunity to pattern L1.22
Table 10 – Immunity to pattern L2.22
Table 11 – Immunity to pattern L3.23
Table 12 – Immunity to analogue co-channel .27
Table 13 – Performance with echoes within guard interval .29
Table 14 – Paths in echoes within guard interval measurement .30
Table 15 – Delay of the corner point Tc.31
Table 16 – Definition of the value Δ .31
Table 17 – Definition of the inflection point .31
Table 18 – Measurement conditions and modes used in measurements.33
Table 19 – Minimum required performance in presence of impulsive interference. .34

---------------------- Page: 8 ----------------------

62002-2  IEC:2005(E) – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

MOBILE AND PORTABLE DVB-T/H RADIO ACCESS –

Part 2: Interface conformance testing


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62002-2 has been prepared by Technical Area 1: Terminals for
audio, video and data services, of IEC technical committee 100: Audio, video and multimedia
systems and equipment.
The text of this standard is based on the following documents:
CDV Report on voting
100/921/CDV 100/1013/RVC

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 9 ----------------------

– 6 – 62002-2  IEC:2005(E)
IEC 62002 consists of the following parts, under the general title Mobile and portable DVB-
T/H radio access:
Part 1: Interface specification
Part 2: Interface conformance testing
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

---------------------- Page: 10 ----------------------

62002-2  IEC:2005(E) – 7 –
MOBILE AND PORTABLE DVB-T/H RADIO ACCESS –

Part 2: Interface conformance testing



1 Scope
This part of IEC 62002 provides the conformance testing rules and guidelines for equipment
built to meet the mobile and portable DVB-T/H radio access interface specification
(IEC 62002-1).
The purpose of this standard is to limit the required test cases to a practical level.
Nevertheless, the manufacturer is responsible for guaranteeing that the terminal fulfils the
mobile and portable DVB-T/H radio access interface specification (IEC 62002-1) in all its
aspects.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 62002-1, Mobile and portable DVB-T/H radio access – Part 1: Interface specification
ETSI EN 300 744, V1.5.1:2004, Digital Video Broadcasting (DVB) – Framing structure,
channel coding and modulation for digital terrestrial television
3 Abbreviations
For the purposes of this document, the following abbreviations apply.
λ Lambda, wavelength (λ = c/f)
A2 German analogue TV stereo system
A Coupling between antennas
A
AGC Automatic gain control
A Stop-band attenuation of the GSM reject filter
GSM
B Bandwidth
BER Bit error ratio
C Carrier power (in band carrier power including any echoes)
8
C
Speed of light c = 3,0 × 10 m/s
Ci Power contribution from the i-th signal
Ct Total useful carrier power
C/N
Carrier-to-noise ratio
C/N Minimum C/N
min
CPE
Common phase error
CR Code rate
dB Decibel

---------------------- Page: 11 ----------------------

– 8 – 62002-2  IEC:2005(E)
dBc dB compared to carrier power C
dBd Antenna gain in dB compared to reference dipole (0 dBd = –2,14 dBi)
dBi Antenna gain in dB compared to isotropic antenna (0 dBi = 2,14 dBd)
dB(mW) Power in dB compared to 1 mW
DUT Device under test
DVB, DVB-T Digital video broadcasting, terrestrial digital video broadcasting
DVB-H Digital video broadcasting to hand-held terminals
DVB-RCT DVB terrestrial return channel
E Field strength V/m
E(dBµV/m) Field strength in dB compared to 1 µV
EDGE Enhanced data rates for GSM/global evolution
EMC Electromagnetic compatibility
END
Equivalent noise degradation
ENF Equivalent noise floor
ESR
Erroneous second ratio
f Frequency in Hz
f (MHz)
Frequency in MHz
fc Centre frequency
F
Noise factor
fd, Fd Doppler frequency
Fd
Doppler frequency with minimum C/N requirement raised by 3 dB
3dB
FER Frame error rate
G
Gain
Ga Antenna gain
GI
Guard interval
GPRS General packet radio service
GSM Global system for mobile communications
I Interfering power
ICI
Intercarrier interference
J Joule
-26
k Boltzmann’s constant k = 1,38 × 10 J/K
K Kelvin
L1, L2, L3 Linearity patterns
L Insertion loss of the GSM reject filter
GSM
LNA Low noise amplifier
MER Modulation error ratio
MFER MPE-FEC frame error rate
MHz Megahertz
MPEG-2 Motion pictures expert group, video compression standard
n, m, N Channel indexes

---------------------- Page: 12 ----------------------

62002-2  IEC:2005(E) – 9 –
NF Noise figure in dB
NICAM Additional sound carrier for analogue TV, modulated with a near
instantaneous compended audio multiplex
PA Power amplifier
PAL, PAL B, PAL G, Phase alternation line, TV systems using PAL
PAL I, PAL I1
PER Packet error ratio
PFP Picture failure point
P
Input power W
in
P (dB(mW)) Input power dB compared to 1 mW
in
P Maximum power

max
ppm Parts per million
PSI/SI Program specific information, service information
P Transmission power
TX
Px Excess noise power dBc
QAM16, QAM64 Quadrature amplitude modulation, 16-level and 64-level versions
QEF Quasi error free
QoS Quality of service
QPSK Quaternary phase shift keying
RF Radiofrequency
RS Reed Solomon
Rx Receiver
S1,S2 Selectivity patterns
SECAM, SECAM L Sequential à mémoire, TV system using SECAM
SFN Single frequency network
SFP Subjective failure point
T Temperature in kelvins
Tc Corner point
Te Total duration of the gating pulses
ti Time of arrival for the i-th signal
TS Transport stream
Tg Guard interval duration
Tu Active symbol duration
Tx Transmitter
UHF Ultra high frequency
UMTS Universal mobile telecommunications system
VHF Very high frequency
W Watt
WCDMA Wide-band code division multiple access
Wi Weighting coefficient for the i-th component

---------------------- Page: 13 ----------------------

– 10 – 62002-2  IEC:2005(E)
4 Test conditions
4.1 General test conditions
4.1.1 General
The general test conditions are set out below. Manufacturers should note that the actual
conditions of use could be more stringent.
4.1.2 Temperature
The terminal shall be tested in the normal laboratory conditions defined below:
+ 5 °C to +35 °C For normal conditions (with relative humidity of 25 % to 75 %)
4.1.3 Voltage
All tests are performed under nominal operating voltage as defined by the manufacturer.
4.2 Terminal categories and summarized measurement conditions
Table 1 shows which conformance measurements are performed with different terminal
categories and summaries the measurement conditions.
Table 1 – Valid conformance measurements for different terminal categories
 Terminal Terminal Terminal Terminal
Clause Conditions category a category b1 category b2 category c
hand-held
car portable TVs pocketable
convergence
terminals TVs
terminals

Ch 45
Gaussian All modulations, 2k/4k/8k
Portable All modulations, 2k/4k/8k
5 C/N performance
QPSK 1/2 , QPSK 1/2 ,
16QAM 1/2 16QAM 1/2
Mobile - -
and 2/3 and 2/3
GI 1/4 GI 1/4
Ch 21, 45, 64 (UHF), Ch 8, 12 (VHF)
6 Receiver minimum Minimum and
and maximum input maximum input
signal levels levels
QPSK 1/2
N ± 1: Ch 45 (UHF), Ch 8 (VHF) with 64QAM 2/3 additionally Ch
21, 64 (UHF), Ch 5, 12 (VHF). N±2: Ch 45 (UHF), Ch 8 (VHF)
S1
16QAM 3/4 , 16QAM 2/3, 16QAM 1/2 , 64QAM 3/4 , 64QAM 2/3
GI1/8
7 Immunity to
analogue and/or
Ch 45 (UHF), Ch 8 (VHF)
digital signals in other
S2
channels
64QAM 2/3, GI 1/8
Ch 21,45,64 (UHF) Ch 8 (VHF)
L1-L3
16QAM 2/3, GI 1/8
Ch 45 (UHF)
8 Immunity to co-
channel interference

from analogue TV
signals
All modulations, GI 1/8

---------------------- Page: 14 ----------------------

62002-2  IEC:2005(E) – 11 –
Table 1 (continued)
 Terminal Terminal Terminal Terminal
Clause Conditions category a category b1 category b2 category c
hand-held
car portable TVs pocketable
convergence
terminals TVs
terminals
Ch 45 (UHF)
9 Guard interval
utilization: echoes
within guard interval
8k, 64QAM 2/3, GI 1/8
8k, 16QAM 1/2, GI 1/8
Ch 45 (UHF)
10 Guard interval
utilization: echoes

outside the guard
8k, 64QAM 2/3, GI 1/8
interval
8k, 16QAM 1/2, GI 1/8
8k, 16QAM 2/3, GI 1/8
Ch 45 (UHF)
11 Tolerance to

8k, 64QAM 2/3, GI 1/8
impulse interference
8k, 16QAM 1/2, GI 1/8
8k, 16QAM 2/3, GI 1/8

4.3 Required equipment
The following list gives an overview of the measurement equipment required for the entire set
of conformance testing. Capabilities and features of the actual equipment may vary and there
could be alternative ways of performing the measurements. Therefore, no detailed instructions
for various measurements are given and the list of the required equipment is an example.
• 3 DVB-T/H signal sources
• Wideband noise source
• 2 PAL/SECAM analogue TV-signal sources
• Spectrum analyser
• Channel simulator
• RF power meter
• Impulse noise source
• MPEG-2 source
• MPEG-2 decoder
• DVB-H IP encapsulator
• Step attenuators, power dividers, cables and other standard RF measurement accessories
4.4 Reference model and test point
The receiver performance is defined according to the reference model shown in Figure 1.

---------------------- Page: 15 ----------------------

– 12 – 62002-2  IEC:2005(E)

Field
strength
Antenna Optional external
E
gain antenna connector
G
a
Only in DVB-H receiver
Noise
IP out
factor
DVB-H DVB-H DVB-H
F
DVB-T
time
...