SIST EN 17888-2:2024
(Main)Thermal performance of buildings - In situ testing of building test structures - Part 2: Steady-state data analysis for aggregate heat loss test
Thermal performance of buildings - In situ testing of building test structures - Part 2: Steady-state data analysis for aggregate heat loss test
This document specifies the steady-state data analysis methods to evaluate the data from ‘the aggregate heat loss test method’. These analysis methods enable the actual in situ aggregate heat loss (building heat transfer coefficient) to be estimated.
NOTE The aggregate heat loss method is specified in prEN 17888-1:2022, Thermal performance of buildings - In situ testing of building test structures - Part 1: Data collection for aggregate heat loss test.
Thermische Leistung von Gebäuden - In-situ-Tests von Gebäudeteststrukturen - Teil 2: Steady-State-Datenanalyse für Gesamtwärmeverlusttest
Dieses Dokument legt die Verfahren zur stationären Datenanalyse fest, um die Daten aus dem "Verfahren zur Prüfung des Gesamtwärmeverlustes" auszuwerten. Diese Analyseverfahren ermöglichen es, den tatsächlichen In-situ-Gesamtwärmeverlust (Wärmedurchgangskoeffizient des Gebäudes) abzuschätzen.
ANMERKUNG Das Verfahren zur Prüfung des Gesamtwärmeverlustes ist in prEN 17888-1:2022, Wärmetechnisches Verhalten von Gebäuden - In situ-Messung an Bauwerksprüfkörpern - Teil 1: Datenerfassung für die Prüfung des Gesamtwärmeverlustes, festgelegt.
Performance thermique des bâtiments - Mesurage in-situ de bâtiment d’essai - Partie 2 : Analyse des données en régime permanent pour le test de perte de chaleur globale
Le présent document spécifie les méthodes d’analyse des données en régime stationnaire pour évaluer les données issues de la méthode d’essai de déperdition thermique globale. Ces méthodes d’analyse permettent d’estimer la déperdition thermique globale réelle in situ (coefficient de transfert thermique d’un bâtiment).
NOTE La méthode de déperdition thermique globale est spécifiée dans le prEN 17888 1:2022, Performance thermique des bâtiments — Essais in situ des structures de bâtiments d’essai — Partie 1 : Collecte de données pour l’essai de déperdition thermique globale.
Toplotne značilnosti stavb - Preskušanje gradbenih preskusnih struktur na mestu vgradnje - 2. del: Analiza podatkov v stanju dinamičnega ravnovesja za preskus skupnih toplotnih izgub
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17888-2:2024
01-julij-2024
Toplotne značilnosti stavb - Preskušanje gradbenih preskusnih struktur na mestu
vgradnje - 2. del: Analiza podatkov v stanju dinamičnega ravnovesja za preskus
skupnih toplotnih izgub
Thermal performance of buildings - In situ testing of building test structures - Part 2:
Steady-state data analysis for aggregate heat loss test
Thermische Leistung von Gebäuden - In-situ-Tests von Gebäudeteststrukturen - Teil 2:
Steady-State-Datenanalyse für Gesamtwärmeverlusttest
Performance thermique des bâtiments - Mesurage in-situ de bâtiment d’essai - Partie 2 :
Analyse des données en régime permanent pour le test de perte de chaleur globale
Ta slovenski standard je istoveten z: EN 17888-2:2024
ICS:
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
SIST EN 17888-2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17888-2:2024
---------------------- Page: 2 ----------------------
SIST EN 17888-2:2024
EN 17888-2
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2024
EUROPÄISCHE NORM
ICS 91.120.10
English Version
Thermal performance of buildings - In situ testing of
building test structures - Part 2: Steady-state data analysis
for aggregate heat loss test
Performance thermique des bâtiments - Essais in situ Wärmetechnisches Verhalten von Gebäuden - In-situ-
des structures de bâtiments d'essai - Partie 2 : Analyse Messung an Bauwerksprüfkörpern - Teil 2:
des données en régime stationnaire pour l'essai de Auswertung stationärer Daten für die Prüfung des
déperdition thermique globale Gesamtwärmeverlustes
This European Standard was approved by CEN on 27 February 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17888-2:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17888-2:2024
EN 17888-2:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and symbols . 5
3.1 Terms and definitions . 5
3.2 Symbols . 7
4 Principle . 9
5 Uncertainty. 9
6 Input data. 10
6.1 Raw data .
...
SLOVENSKI STANDARD
oSIST prEN 17888-2:2022
01-november-2022
Toplotne značilnosti stavb - Preskušanje gradbenih preskusnih struktur na mestu
vgradnje - 2. del: Analiza podatkov v stanju dinamičnega ravnovesja za preskus
skupnih toplotnih izgub
Thermal performance of buildings - In situ testing of building test structures - Part 2:
Steady-state data analysis for aggregate heat loss test
Thermische Leistung von Gebäuden - In-situ-Tests von Gebäudeteststrukturen - Teil 2:
Steady-State-Datenanalyse für Gesamtwärmeverlusttest
Performance thermique des bâtiments - Mesurage in-situ de bâtiment d’essai - Partie 2 :
Analyse des données en régime permanent pour le test de perte de chaleur globale
Ta slovenski standard je istoveten z: prEN 17888-2
ICS:
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
oSIST prEN 17888-2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17888-2:2022
---------------------- Page: 2 ----------------------
oSIST prEN 17888-2:2022
DRAFT
EUROPEAN STANDARD
prEN 17888-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2022
ICS 91.120.10
English Version
Thermal performance of buildings - In situ testing of
building test structures - Part 2: Steady-state data analysis
for aggregate heat loss test
Performance thermique des bâtiments - Mesurage in- Thermische Leistung von Gebäuden - In-situ-Tests von
situ de bâtiment d'essai - Partie 2 : Analyse des Gebäudeteststrukturen - Teil 2: Steady-State-
données en régime permanent pour le test de perte de Datenanalyse für Gesamtwärmeverlusttest
chaleur globale
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 89.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17888-2:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17888-2:2022
prEN 17888-2:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and symbols . 5
3.1 Terms and definitions . 5
3.2 Symbols . 6
4 General principle . 8
5 Uncertainty .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.