SIST EN IEC 60794-1-104:2024
(Main)Optical fibre cables - Part 1-104: Generic specification - Basic optical cable test procedures - Mechanical tests method - Impact, method E4 (IEC 60794-1-104:2024)
Optical fibre cables - Part 1-104: Generic specification - Basic optical cable test procedures - Mechanical tests method - Impact, method E4 (IEC 60794-1-104:2024)
IEC 60794-1-104:2024 applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. This document defines test procedures to be used in establishing uniform requirements for impact performance. Throughout this document the wording “optical cable” includes optical fibre units, microduct fibre units, etc. See IEC 60794-1-2 for general requirements and definitions and for a complete reference guide to test methods of all types.
This document partially cancels and replaces IEC 60794-1-21:2015, which will be withdrawn. In the context of the revision of IEC 60794-1-21:2015, its contents were split into separate test methods. It includes an editorial revision, based on the new structure and numbering system for optical fibre cable test methods.
Lichtwellenleiterkabel - Teil 1-104: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Mechanische Prüfverfahren - Schlagprüfung, Verfahren E4 (IEC 60794-1-104:2024)
Câbles à fibres optiques - Partie 1-104: Spécification générique - Procédures fondamentales d’essais des câbles optiques - Méthode d’essai mécanique - Choc, méthode E4 (IEC 60794-1-104:2024)
IEC 60794-1-104:2024 s’applique aux câbles à fibres optiques destinés à être utilisés dans les équipements de télécommunications et les dispositifs utilisant des techniques analogues, ainsi qu'aux câbles constitués de fibres optiques d'une part et de conducteurs électriques d'autre part. L’objet du présent document est de définir les procédures d’essai à utiliser en vue d’établir des exigences uniformes pour la tenue aux chocs. Dans le présent document, l'expression "câble optique" englobe des assemblages de fibres optiques, des assemblages de fibres pour microconduits, etc. Se reporter à l’IEC 60794-1-2 pour les exigences générales et les définitions, et un guide de référence complet pour tous les types de méthodes d’essai.
Le présent document annule et remplace partiellement l’IEC 60794-1-21:2015, qui est destinée à être supprimée. Dans le cadre de la révision de l’IEC 60794-1-21:2015, son contenu a été scindé en méthodes d'essai distinctes. Il comprend une révision rédactionnelle, découlant de la nouvelle structure et du nouveau système de numérotation pour les méthodes d'essai des câbles à fibres optiques.
Optični kabli - 1-104. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Mehanska preskusna metoda - Vpliv, metoda E4 (IEC 60794-1-104:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60794-1-104:2024
01-september-2024
Optični kabli - 1-104. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Mehanska preskusna metoda - Vpliv, metoda E4 (IEC 60794-1-
104:2024)
Optical fibre cables - Part 1-104: Generic specification - Basic optical cable test
procedures - Mechanical tests method - Impact, method E4 (IEC 60794-1-104:2024)
Lichtwellenleiterkabel - Teil 1-104: Fachgrundspezifikation - Grundlegende Prüfverfahren
für Lichtwellenleiterkabel - Mechanische Prüfverfahren - Schlagprüfung, Verfahren E4
(IEC 60794-1-104:2024)
Câbles à fibres optiques - Partie 1-104: Spécification générique - Procédures
fondamentales d’essais des câbles optiques - Méthode d’essai mécanique - Choc,
méthode E4 (IEC 60794-1-104:2024)
Ta slovenski standard je istoveten z: EN IEC 60794-1-104:2024
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
SIST EN IEC 60794-1-104:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60794-1-104:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 60794-1-104:2024
EUROPEAN STANDARD EN IEC 60794-1-104
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2024
ICS 33.180.10 Supersedes EN 60794-1-21:2015 (partially)
English Version
Optical fibre cables - Part 1-104: Generic specification - Basic
optical cable test procedures - Mechanical tests methods -
Impact, method E4
(IEC 60794-1-104:2024)
Câbles à fibres optiques - Partie 1-104: Spécification Lichtwellenleiterkabel - Teil 1-104: Fachgrundspezifikation -
générique - Procédures fondamentales d'essais des câbles Grundlegende Prüfverfahren für Lichtwellenleiterkabel -
optiques - Méthodes d'essais mécaniques - Chocs, Mechanische Prüfverfahren - Schlagprüfung, Verfahren E4
méthode E4 (IEC 60794-1-104:2024)
(IEC 60794-1-104:2024)
This European Standard was approved by CENELEC on 2024-06-07. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60794-1-104:2024 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60794-1-104:2024
EN IEC 60794-1-104:2024 (E)
European foreword
The text of document 86A/2360/CDV, future edition 1 of IEC 60794-1-104, prepared by SC 86A
"Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60794-1-104:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-03-07
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-06-07
document have to be withdrawn
This document partially supersedes EN 60794-1-21:2015 and all of its amendments and corrigenda (if
any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60794-1-104:2024 was approved by CENELEC as a
European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60794-1-104:2024
EN IEC 60794-1-104:2024 (E)
Annex ZA
(normative)
Normati
...
SLOVENSKI STANDARD
oSIST prEN IEC 60794-1-104:2023
01-oktober-2023
Optični kabli - 1-104. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Mehanska preskusna metoda - Vpliv, metoda E4
Optical fibre cables - Part 1-104: Generic specification - Basic optical cable test
procedures - Mechanical tests method - Impact, method E4
Câbles à fibres optiques - Partie 1-104: Spécification générique - Procédures
fondamentales d’essais des câbles optiques - Méthode d’essai mécanique - Choc,
méthode E4
Ta slovenski standard je istoveten z: prEN IEC 60794-1-104:2023
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
oSIST prEN IEC 60794-1-104:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 60794-1-104:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60794-1-104:2023
86A/2360/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60794-1-104 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-08-18 2023-11-10
SUPERSEDES DOCUMENTS:
86A/2309/CD, 86A/2352/CC
IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights
of which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In So me
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Optical fibre cables - Part 1-104: Generic specification - Basic optical cable test procedures -
Mechanical tests method - Impact, method E4
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60794-1-104:2023
IEC CDV 60794-1-104/Ed1 © IEC 2023 2 86A/2360/CDV
1 CONTENTS
2
3 FOREWORD . 3
4 1 Scope . 6
5 2 Normative references . 6
6 3 Terms and definitions . 6
7 4 Method E4: Impact . 6
8 4.1 Object . 6
9 4.2 Sample . 6
10 4.2.1 Sample length . 6
11 4.2.2 Termination . 7
12 4.3 Apparatus . 7
13 4.4 Procedure . 7
14 4.5 Requirements . 7
15 4.6 Details to be specified . 7
16 4.7 Details to be reported . 8
17
18 Figure 1 – Impact test .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.