Agricultural tractors - Operator's workplace, access and exit - Dimensions

This International Standard specifies the design dimensions of agricultural tractors having a minimum track
width exceeding in respect of
a) the minimum dimensions of their access doorways,
b) the number, location and minimum dimensions of their emergency exits, and
c) their minimum internal clearance dimensions.

Tracteurs agricoles - Poste de travail de l'opérateur, accès et sortie - Dimensions

L'ISO 4252:2007 sp�cifie les dimensions de conception des tracteurs agricoles ayant une largeur de voie minimale sup�rieure � 1 150 mm en ce qui concerne les dimensions minimales des ouvertures d'acc�s, le nombre, l'emplacement et les dimensions minimales des sorties de secours, et les dimensions minimales de d�gagement interne.

Kmetijski traktorji - Vozniški prostor, dostop in izhod - Mere

Ta mednarodni standard določa mere kmetijskih traktorjev s preseženo minimalno širino koloteka glede na
a) minimalne mere dostopnih vrat,
b) število, mesto in minimalne mere zasilnih izhodov in
c) minimalne mere notranjega neoviranega prostora.

General Information

Status
Published
Publication Date
23-Feb-2015
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Feb-2015
Due Date
18-Apr-2015
Completion Date
24-Feb-2015

Relations

Buy Standard

Standard
ISO 4252:2007 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 4252:2015
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 4252:2007 - Tracteurs agricoles -- Poste de travail de l'opérateur, acces et sortie -- Dimensions
French language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 4252
Third edition
2007-11-01
Agricultural tractors — Operator's
workplace, access and exit — Dimensions
Tracteurs agricoles — Poste de travail de l'opérateur, accès et sortie —
Dimensions

Reference number
ISO 4252:2007(E)
©
ISO 2007

---------------------- Page: 1 ----------------------
ISO 4252:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
 COPYRIGHT PROTECTED DOCUMENT
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
©
ii ISO 2007 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 4252:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4252 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and
forestry, Subcommittee SC 4, Tractors.
This third edition cancels and replaces the second edition (ISO 4252:1992), which has been technically revised.
©
ISO 2007 – All rights reserved iii

---------------------- Page: 3 ----------------------
.
iv

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 4252:2007(E)
Agricultural tractors — Operator's workplace, access and exit —
Dimensions
1Scope
This International Standard specifies the design dimensions of agricultural tractors having a minimum track
width exceeding 1 150 mm in respect of
a) the minimum dimensions of their access doorways,
b) the number, location and minimum dimensions of their emergency exits, and
c) their minimum internal clearance dimensions.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 789-6, Agricultural tractors — Test procedures — Part 6: Centre of gravity
ISO 5353, Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
emergency exit
means of exit that can be opened from the inside of the cabin
NOTE It can be a normal access door.
3.2
access door
doorway
means of entry to, and exit from, the workplace or cabin
3.3
mountain tractor
four-wheel drive agricultural or forestry tractor whose interchangeable equipment is intended for agricultural or
forestry use and which is characterized by a supporting frame, one or more power take-offs, a technically
permissible mass not greater than 10 t at a ratio to the maximum unladen mass in running order of less than
2,5, and which has a centre of gravity less than 850 mm, determined in accordance with ISO 789-6 and
measured in relation to the ground using the tyres that are normally fitted
©
ISO 2007 – All rights res
...

SLOVENSKI STANDARD
SIST ISO 4252:2015
01-april-2015
1DGRPHãþD
SIST ISO 4252:1995
Kmetijski traktorji - Vozniški prostor, dostop in izhod - Mere
Agricultural tractors - Operator's workplace, access and exit - Dimensions
Tracteurs agricoles - Poste de travail de l'opérateur, accès et sortie - Dimensions
Ta slovenski standard je istoveten z: ISO 4252:2007
ICS:
65.060.10 Kmetijski traktorji in prikolice Agricultural tractors and
trailed vehicles
SIST ISO 4252:2015 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 4252:2015

---------------------- Page: 2 ----------------------

SIST ISO 4252:2015
INTERNATIONAL ISO
STANDARD 4252
Third edition
2007-11-01
Agricultural tractors — Operator's
workplace, access and exit — Dimensions
Tracteurs agricoles — Poste de travail de l'opérateur, accès et sortie —
Dimensions

Reference number
ISO 4252:2007(E)
©
ISO 2007

---------------------- Page: 3 ----------------------

SIST ISO 4252:2015
ISO 4252:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
 COPYRIGHT PROTECTED DOCUMENT
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
©
ii ISO 2007 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 4252:2015
ISO 4252:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4252 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and
forestry, Subcommittee SC 4, Tractors.
This third edition cancels and replaces the second edition (ISO 4252:1992), which has been technically revised.
©
ISO 2007 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 4252:2015
.
iv

---------------------- Page: 6 ----------------------

SIST ISO 4252:2015
INTERNATIONAL STANDARD ISO 4252:2007(E)
Agricultural tractors — Operator's workplace, access and exit —
Dimensions
1Scope
This International Standard specifies the design dimensions of agricultural tractors having a minimum track
width exceeding 1 150 mm in respect of
a) the minimum dimensions of their access doorways,
b) the number, location and minimum dimensions of their emergency exits, and
c) their minimum internal clearance dimensions.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 789-6, Agricultural tractors — Test procedures — Part 6: Centre of gravity
ISO 5353, Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
emergency exit
means of exit that can be opened from the inside of the cabin
NOTE It can be a normal access door.
3.2
access door
doorway
means of entry to, and exit from, the workplace or cabin
3.3
mountain tractor
four-wheel drive agricultural or forestry tractor whose interchangeable
...

NORME ISO
INTERNATIONALE 4252
Troisième édition
2007-11-01
Tracteurs agricoles — Poste de travail de
l'opérateur, accès et sortie — Dimensions
Agricultural tractors — Operator's workplace, access and exit —
Dimensions

Numéro de référence
ISO 4252:2007(F)
©
ISO 2007

---------------------- Page: 1 ----------------------
ISO 4252:2007(F)
PDF — Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info du
fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir l'exploitation
de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation, veuillez en informer
le Secrétariat central à l'adresse donnée ci-dessous.
 DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2007
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
©
ii ISO 2007 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 4252:2007(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec la
Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de droits
de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne pas avoir
identifié de tels droits de propriété et averti de leur existence.
L'ISO 4252 a été élaborée par le comité technique ISO/TC 23, Tracteurs et matériels agricoles et forestiers,
sous-comité SC 4, Tracteurs.
Cette troisième édition annule et remplace la deuxième édition (ISO 4252:1992), qui a fait l'objet d'une révision
technique.
©
ISO 2007 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
.
iv

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO 4252:2007(F)
Tracteurs agricoles — Poste de travail de l'opérateur, accès et
sortie — Dimensions
1 Domaine d'application
La présente Norme internationale spécifie les dimensions de conception des tracteurs agricoles ayant une
largeur de voie minimale supérieure à 1 150 mm en ce qui concerne
a) les dimensions minimales des ouvertures d'accès,
b) le nombre, l'emplacement et les dimensions minimales des sorties de secours, et
c) les dimensions minimales de dégagement interne.
2 Références normatives
Les documents de référence suivants sont indispensables pour l'application du présent document. Pour les
références datées, seule l'édition citée s'applique. Pour les références non datées, la dernière édition du
document de référence s'applique (y compris les éventuels amendements).
ISO 789-6, Tracteurs agricoles — Méthodes d'essai — Partie 6: Centre de gravité
ISO 5353, Engins de terrassement, et tracteurs et matériels agricoles et forestiers — Point repère du siège
3 Termes et définitions
Pour les besoins du présent document, les termes et définitions suivants s'appliquent.
3.1
sortie de secours
dispositif de sortie qui peut être ouvert de l'intérieur de la cabine
NOTE Il peut correspondre à une ouverture d'accès normale.
3.2
ouverture d'accès
dispositif d'entrée et de sortie du poste de travail ou de la cabine
3.3
tracteur tout terrain
tracteur forestier ou agricole à quatre roues motrices dont l'équipement interchangeable est conçu pour une
utilisation agricole ou forestière, et qui est caractérisé par un châssis support, une ou plusieurs prises de force,
une masse autorisée techniquement ne dépassant pas 10 tonnes, un rapport de cette masse par la masse
maximale sans charge en ordre de marche inférieur à 2,5 et un centre de gravité à moins de 850 mm,
déterminé conformément à l'ISO 789-6 et mesuré en relation avec le sol en utilisant les pneumatiques dont il
est normalement équipé
©
ISO 2007 – Tous droits réservés 1

---------------------- Page: 5 ----------------------
ISO 4252:2007(F)
4 Ouverture(s) d'accès
Les dimensions minimales du clair
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.