SIST EN 61857-31:2017

Electrical insulation systems-procedures for thermal evaluation - Part 31: Applications with a designed life less than 5000 hours (IEC 61857-31:2017)

This part of IEC 61857 establishes an EIS evaluation for applications with a designed life of
5 000 h or less. This test method follows the procedures of IEC 60505 and is modified based
on the range of designed life.

Elektrische Isoliersysteme - Verfahren zur thermischen Bewertung - Teil 31: Anwendungen mit einer vorgesehenen Betriebsdauer von weniger als 5 000 h oder weniger

Systèmes d'isolation électrique - Procédures d'évaluation thermique – Partie 31: Applications avec une durée de vie de conception maximale de 5 000h

   L'IEC 61857-31:2017 établit une évaluation SIE pour les applications dont la durée de vie de conception maximale est de 5 000 h. Cette méthode d'essai suit les procédures de l'IEC 60505 et est modifiée en fonction de la plage de durée de vie de conception.

Električni izolacijski sistemi - Postopki za ocenjevanje toplotnih lastnosti - 31. del: Vrste uporabe s predvideno življenjsko dobo, krajšo od 5000 ur (IEC 61857-31:2017)

Ta del standarda IEC 61857 vzpostavlja ocenjevanje električnih izolacijskih sistemov za vrste uporabe s predvideno življenjsko dob 5000 ur ali manj. Ta preskusna metoda upošteva postopke iz standarda IEC 60505 in je prilagojena na podlagi predvidene življenjske dobe.

General Information

• Status: Published
• Publication Date: 25-Apr-2017
• ICS: 29.080.30 - Insulation systems
• Technical Committee: IIZS - Insulating materials and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 19-Apr-2017
• Due Date: 24-Jun-2017
• Completion Date: 26-Apr-2017
• Ref Project: EN 61857-31:2017 - Electrical insulation systems - Procedures for thermal evaluation - Part 31: Applications with a designed life of 5 000 h or less

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61857-31:2017
01-junij-2017
(OHNWULþQLL]RODFLMVNLVLVWHPL3RVWRSNL]DRFHQMHYDQMHWRSORWQLKODVWQRVWLGHO
9UVWHXSRUDEHVSUHGYLGHQRåLYOMHQMVNRGRERNUDMãRRGXU,(&

Electrical insulation systems-procedures for thermal evaluation - Part 31: Applications
with a designed life less than 5000 hours (IEC 61857-31:2017)
Ta slovenski standard je istoveten z: EN 61857-31:2017
ICS:
29.080.30 Izolacijski sistemi Insulation systems
SIST EN 61857-31:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61857-31:2017

---------------------- Page: 2 ----------------------

SIST EN 61857-31:2017


EUROPEAN STANDARD EN 61857-31

NORME EUROPÉENNE

EUROPÄISCHE NORM
April 2017
ICS 29.080.30

English Version
Electrical insulation systems - Procedures for thermal evaluation
- Part 31: Applications with a designed life of 5 000 h or less
(IEC 61857-31:2017)
Systèmes d'isolement électrique - Modes opératoires pour Elektrische Isoliersysteme - Verfahren zur thermischen
l'évaluation thermique - Partie 31 : Applications à durée de Bewertung - Teil 31: Anwendungen mit einer vorgesehenen
vie nominale inférieure à 5 000 heures Betriebsdauer von weniger als 5 000 h
(IEC 61857-31:2017) (IEC 61857-31:2017)
This European Standard was approved by CENELEC on 2017-02-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61857-31:2017 E

---------------------- Page: 3 ----------------------

SIST EN 61857-31:2017
EN 61857-31:2017
European foreword
The text of document 112/356/CDV, future edition 1 of IEC 61857-31, prepared by
IEC/TC 112 "Evaluation and qualification of electrical insulating materials and systems" was submitted
to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61857-31:2017.

The following dates are fixed:
(dop) 2017-11-28
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-02-28
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61857-31:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61857 (series) NOTE Harmonized as EN 61857 (series).

2

---------------------- Page: 4 ----------------------

SIST EN 61857-31:2017
EN 61857-31:2017

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60505 -  Evaluation and qualification of electrical EN 60505 -
insulation systems
IEC 61857-1 -  Electrical insulation systems - Procedures EN 61857-1 -
for thermal evaluation -- Part 1: General
requirements - Low-voltage
IEC 61857-21 -  Electrical insulation systems - Procedures EN 61857-21 -
for thermal evaluation -- Part 21: Specific
requirements for general-purpose models -
Wire-wound applications
IEC 61857-22 -  Electrical insulation systems - Procedures EN 61857-22 -
for thermal evaluation -- Part 22: Specific
requirements for encapsulated-coil model -
Wire-wound electrical insulation system
(EIS)
IEC/TR 61857-2 -  Electrical insulation systems - Procedures - -
for thermal evaluation - Part 2: Selection of
the appropriate test method for evaluation
and classification of electrical insulation
systems

3

---------------------- Page: 5 ----------------------

SIST EN 61857-31:2017

---------------------- Page: 6 ----------------------

SIST EN 61857-31:2017



IEC 61857-31

®


Edition 1.0 2017-01




INTERNATIONAL



STANDARD



















Electrical insulation systems – Procedures for thermal evaluation –

Part 31: Applications with a designed life of 5 000 h or less



























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 29.080.30 ISBN 978-2-8322-3843-1



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 61857-31:2017
– 2 – IEC 61857-31:2017  IEC 2017
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 EIS evaluation . 7
5 Test objects . 7
6 Test procedures . 7
6.1 Procedure A: Establishing a TE for applications with a designed life of
1 500 h or less: one-temperature ageing . 7
6.2 Procedure B: Establishing a TE rating for applications with a designed life of
5 000 h or less: one-temperature ageing . 8
6.3 Procedure C: Establishing a TE rating for applications with a designed life of
5 000 h or less: two-temperature ageing . 8
7 Data analysis . 8
7.1 Analysis – Test Procedures A and B (See 6.1 and 6.2) . 8
7.2 Analysis – Test Procedure C (See 6.3) . 9
8 Test report . 9
Bibliography . 10

---------------------- Page: 8 ----------------------

SIST EN 61857-31:2017
IEC 61857-31:2017  IEC 2017 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

ELECTRICAL INSULATION SYSTEMS – PROCEDURES
FOR THERMAL EVALUATION –

Part 31: Applications with a designed life of 5 000 h or less

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, prop
...