SIST EN 1335-3:2010/AC:2010

Office furniture - Office work chair - Part 3: Test methods - Corrigendum AC

This European Standard specifies mechanical test methods for determining the stability, strength and durability of office work chairs. This European Standard does not specify type approval tests for chair components. The tests are designed to be applied to an article of furniture that is fully assembled and ready for use. The tests consist of the application, to various parts of the item, of forces simulating normal functional use, as well as misuse that might reasonably be expected to occur. The tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The test results are only valid for the article tested. When the test results are intended to be applied to other similar articles, it is important that the test specimen be representative of the production model. Tests carried out according to this standard are intended to demonstrate the ability of the item to give satisfactory service in its intended environment. The safety requirements are specified in EN 1335-2 and additional loads, masses and cycles for functional tests can be found in Annex C (informative). The tests have been developed for units/components that have not been in use. However, when properly justified, they may be used for fault investigation. Assessment of ageing and degradation is not included. The tests are not intended to assess the durability of upholstery, i.e. filling materials and covers. Data are given for the design of seat-loading pads in Annex A (normative) and for the design of stabilityloading pad in Annex B (normative).

Büromöbel - Büro-Arbeitsstuhl - Teil 3: Prüfverfahren - Berichtigung AC

Mobilier de bureau - Sièges de travail de bureau - Partie 3: Méthodes d'essai - Corrigendum AC

Pisarniško pohištvo - Pisarniški delovni stoli - 3. del: Preskusne metode - Popravek AC

Ta evropski standard opredeljuje mehanske preskusne metode za določanje stabilnosti, trdnosti in trajnosti pisarniških delovnih stolov. Ta evropski standard ne določa homologacijskih preskusov za sestavne dele stola. Preskusi so namenjeni uporabi na delu pohištva, ki je popolnoma sestavljen in pripravljen za uporabo. Preskusi so sestavljeni iz vnosa sil, ki posnemajo običajno funkcionalno uporabo in upravičeno pričakovano napačno uporabo, na različne dele predmeta. Preskusi so zasnovani tako, da ovrednotijo lastnosti ne glede na materiale, model/konstrukcijo ali proizvodne postopke. Rezultati preskusov veljajo le za preskušani izdelek. Če rezultati preskusov veljajo tudi za druge, podobne izdelke, je pomembno, da je preskusni vzorec predstavnik proizvodnega modela. Preskusi, opravljeni v skladu s tem standardom, so namenjeni dokazovanju zmožnosti predmeta, da v predvidenem okolju omogoča zadovoljivo delovanje. Varnostne zahteve določa standard EN 1335-2, dodatne obremenitve, teže in cikli za funkcionalne preskuse pa so navedeni v Prilogi C (informativni). Preskusi so namenjeni enotam/sestavnim delom, ki še niso bili v uporabi. Z ustrezno utemeljitvijo pa se lahko uporabijo tudi za preiskavo okvare. Ocena staranja in razpada ni vključena. Preskusi niso namenjeni ocenjevanju trajnosti oblazinjenja, tj. polnilnih materialov in prevlek. V Prilogi A (normativni) so podani podatki o zasnovi plošč za obremenitev sedeža in v Prilogi B (normativni) za zasnovo plošč za stabilnostno obremenitev.

General Information

• Status: Withdrawn
• Publication Date: 15-Dec-2009
• Withdrawal Date: 07-Mar-2019
• ICS: 97.140 - Furniture
• Technical Committee: POH - Furniture
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 14-Jan-2019
• Due Date: 06-Feb-2019
• Completion Date: 08-Mar-2019
• Ref Project: EN 1335-3:2009/AC:2009 - Office furniture - Office work chair - Part 3: Test methods

Relations

• Corrects: SIST EN 1335-3:2010 - Office furniture - Office work chair - Part 3: Test methods
• Effective Date: 01-Jan-2010
• Replaced By: SIST EN 1335-2:2019 - Office furniture - Office work chair - Part 2: Safety requirements
• Effective Date: 01-Apr-2019
• Corrects: SIST EN 1335-3:2010 - Office furniture - Office work chair - Part 3: Test methods
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pisarniško pohištvo - Pisarniški delovni stoli - 3. del: Preskusne metode - Popravek ACBüromöbel - Büro-Arbeitsstuhl - Teil 3: Prüfverfahren - Berichtigung ACMobilier de bureau - Sièges de travail de bureau - Partie 3: Méthodes d'essai - Corrigendum ACOffice furniture - Office work chair - Part 3: Test methods - Corrigendum AC97.140PohištvoFurnitureICS:Ta slovenski standard je istoveten z:EN 1335-3:2009/AC:2009SIST EN 1335-3:2010/AC:2010en,fr,de01-januar-2010SIST EN 1335-3:2010/AC:2010SLOVENSKI
STANDARD



SIST EN 1335-3:2010/AC:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1335-3:2009/AC
November 2009
Novembre 2009
November 2009 ICS 97.140 English version Version Française Deutsche Fassung
Office furniture - Office work chair - Part 3: Test methods
Mobilier de bureau - Sièges de travail de bureau - Partie 3: Méthodes d'essai
Büromöbel - Büro-Arbeitsstuhl - Teil 3: Prüfverfahren This corrigendum becomes effective on 4 November 2009 for incorporation in the three official language vers
...