SIST EN ISO 6186:2023
(Main)Plastics - Determination of pourability (ISO 6186:2023)
Plastics - Determination of pourability (ISO 6186:2023)
This document specifies two methods, A and B, for determining the pourability of plastics in powdered and granular form, by measuring the flow time through a funnel under specified conditions.
From method A, information concerning the processability can be derived, whilst method B is especially designed for process control during manufacture.
The methods specified are not necessarily applicable to all plastics in powdered and granular form.
Kunststoffe - Bestimmung der Rieselfähigkeit (ISO 6186:2023)
Dieses Dokument legt zwei Verfahren, A und B, für die Bestimmung der Rieselfähigkeit von Kunststoffen in Form von Pulver und Granulat durch Messung der Durchflusszeit durch einen Trichter unter festgelegten Bedingungen fest.
Aus dem Verfahren A können Informationen bezüglich der Verarbeitbarkeit abgeleitet werden, während Verfahren B speziell für die Prozesskontrolle während der Herstellung ausgelegt ist.
Die festgelegten Verfahren sind nicht unbedingt für alle Kunststoffe in Pulver oder Granulatform anwendbar.
Plastiques - Détermination de l'aptitude à l'écoulement (ISO 6186:2023)
La présente Norme internationale prescrit deux méthodes (méthode A et méthode B) pour la détermination de l'aptitude à l'écoulement des plastiques en poudre et en granulés, par mesurage de la durée d'écoulement à travers un entonnoir. La méthode A permet d'obtenir des informations concernant l'aptitude à la mise en oeuvre, alors que la méthode B est spécifiquement destinée au contrôle des procédés en cours de production. NOTE -- Les méthodes décrites ne s'appliquent pas à la totalité des plastiques en poudre et en granulés.
Polimerni materiali - Določanje časa pretoka prahov in granulatov (ISO 6186:2023)
Ta dokument določa dve metodi, in sicer metodo A in B, za določanje časa pretoka polimernih materialov v obliki prahu in granulatov z meritvami časa pretoka skozi lijak pod določenimi pogoji.
Z metodo A je mogoče pridobiti podatke o primernosti za obdelavo, metoda B pa je posebno zasnovana za nadzor procesov med proizvodnjo.
Opisani metodi ne veljata nujno za vse polimerne materiale v obliki prahu ali granulatov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 6186:2023
01-september-2023
Polimerni materiali - Določanje časa pretoka prahov in granulatov (ISO 6186:2023)
Plastics - Determination of pourability (ISO 6186:2023)
Kunststoffe - Bestimmung der Rieselfähigkeit (ISO 6186:2023)
Plastiques - Détermination de l'aptitude à l'écoulement (ISO 6186:2023)
Ta slovenski standard je istoveten z: EN ISO 6186:2023
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 6186:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 6186:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 6186:2023
EN ISO 6186
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2023
EUROPÄISCHE NORM
ICS 83.080.01 Supersedes EN ISO 6186:1998
English Version
Plastics - Determination of pourability (ISO 6186:2023)
Plastiques - Détermination de l'aptitude à l'écoulement Kunststoffe - Bestimmung der Rieselfähigkeit (ISO
(ISO 6186:2023) 6186:2023)
This European Standard was approved by CEN on 3 June 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6186:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 6186:2023
EN ISO 6186:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 6186:2023
EN ISO 6186:2023 (E)
European foreword
This document (EN ISO 6186:2023) has been prepared by Technical Committee ISO/TC 61 "Plastics" in
collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2024, and conflicting national standards shall
be withdrawn at the latest by January 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 6186:1998.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 6186:2023 has been approved by CEN as EN ISO 6186:2023 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 6186:2023
---------------------- Page: 6 ----------------------
SIST EN ISO 6186:2023
INTERNATIONAL ISO
STANDARD 6186
Third edition
2023-07
Plastics — Determination of
pourability
Plastiques — Détermination de l'aptitude à l'écoulement
Reference number
ISO 6186:2023(E)
© ISO 2023
---------------------- Page: 7 ----------------------
SIST EN ISO 6186:2023
ISO 6186:2023(E)
COPYRIGHT PROTECTED DOC
...
SLOVENSKI STANDARD
oSIST prEN ISO 6186 rev:2023
01-april-2023
Polimerni materiali - Določanje časa pretoka prahov in granulatov (ISO/DIS
6186:2023)
Plastics - Determination of pourability (ISO/DIS 6186:2023)
Kunststoffe - Bestimmung der Rieselfähigkeit (ISO/DIS 6186:2023)
Plastiques Détermination de l'aptitude à l'écoulement (ISO/DIS 6186:2023)
Ta slovenski standard je istoveten z: prEN ISO 6186
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
oSIST prEN ISO 6186 rev:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 6186 rev:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 6186 rev:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 6186
ISO/TC 61/SC 5 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-02-07 2023-05-02
Plastics — Determination of pourability
Plastiques — Détermination de l'aptitude à l'écoulement
ICS: 83.080.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 6186:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 6186 rev:2023
ISO/DIS 6186:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 6186
ISO/TC 61/SC 5 Secretariat: DIN
Voting begins on: Voting terminates on:
Plastics — Determination of pourability
Plastiques — Détermination de l'aptitude à l'écoulement
ICS: 83.080.01
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 6186:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO 6186 rev:2023
ISO/DIS 6186:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.