oSIST prEN 12350-9:2008
(Main)Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test
Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test
The document specifies the procedure for determining the V-funnel flow time for selfcompacting concrete. The test is not suitable when the maximum size of the aggregate exceeds 20 mm.
Prüfung von Frischbeton - Teil 9: Selbstverdichtender Beton - Auslauftrichterversuch
Essai pour béton frais - Partie 9: Béton auto-plaçant - Essai d’écoulement a l’entonnoir en V
Preskušanje svežega betona - 9. del: Samozgoščevalni beton - Preskus z V-lijakom
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 12350-9:2008
01-januar-2008
3UHVNXãDQMHVYHåHJDEHWRQDGHO6DPR]JRãþHYDOQLEHWRQ3UHVNXV]9OLMDNRP
Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test
Prüfung von Frischbeton - Teil 9: Selbstverdichtender Beton - Auslauftrichterversuch
Essai pour béton frais - Partie 9: Béton auto-plaçant - Essai d’écoulement a l’entonnoir
en V
Ta slovenski standard je istoveten z: prEN 12350-9
ICS:
91.100.30
oSIST prEN 12350-9:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN 12350-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2007
ICS 91.100.30
English Version
Testing fresh concrete - Part 9: Self-compacting concrete - V-
funnel test
Essai pour béton frais - Partie 9: Béton auto-plaçant - Essai Prüfung von Frischbeton - Teil 9: Selbstverdichtender
d'écoulement à l'entonnoir en V Beton - Auslauftrichterversuch
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 104.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12350-9:2007: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
prEN 12350-9:2007 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Principle.4
4 Apparatus .4
4.1 V-funnel.4
4.2 Container .4
4.3 Stop watch.4
4.4 Straight edge.4
5 Test sample .5
6 Procedure .5
7 Test report .5
8 Precision.6
2
---------------------- Page: 3 ----------------------
prEN 12350-9:2007 (E)
Foreword
This document (prEN 12350-9:2007) has been prepared by Technical Committee CEN/TC 104 “Concrete and
related products”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This standard is based on the results from the EU-project “Testing-SCC” under the 5th Frame Programme
(GRD2-2000-30024/G6RD-CT-2001-00580).
Owing to its significant advantages in the improvement of construction quality and working environment, self-
compacting concrete (SCC) has been more widely accepted by the construction owners. The use of SCC in
practical concrete construction is stably increasing. Since SCC has to give satisfactory in-situ properties
(perfect filling of the mould and embedment of the reinforcement, homogeneity and full compaction) without
vibration, the proper methods for testing the workability of fresh SCC are very important. The workability of
fresh SCC should basically include three key properties: filling ability, passing ability and resistance to
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.