SIST EN 12960:2002

Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance

This standard describes a test method in which a constant force is applied in the shear mode to an adhesive bond. The time for bond failure to occur at constant temperature is recorded or, alternatively, with increasing temperature, the temperature at which failure occurs. Should the substrate fail under the applied force, the test must be repeated using a lower force. No account is taken of the mechanical properties of the adhesive or adherend that may affect the validity or usefulness of the test.

Klebstoffe für Papier, Verpackung und Hygieneprodukte - Bestimmung des Scherwiderstandes

1 Anwendungsbereich
Diese Europäische Norm legt ein Prüfverfahren für die Bestimmung des Scherwiderstandes einer Klebung bei
konstanter Kraft und bei konstanter oder steigender Temperatur fest.
Das Prüfverfahren ist zur Ermittlung der Rangordnung und zur Qualitätskontrolle der Klebstoffe vorgesehen
und nicht zur Ermittlung von Konstruktionsdaten.

Adhésifs pour papier et carton, emballage et produits sanitaires a jeter - Détermination de la résistance au cisaillement

1 Domaine d'application
La présente norme européenne décrit une méthode d'essai pour déterminer la résistance au cisaillement d'un joint de colle sous charge statique constante et température constante et croissante.
Cette méthode d'essai est destinée a permettre une classification et un contrôle de la qualité des adhésifs, et non a obtenir des données a des fins de conception.

Lepila za papir, karton, embalažo in higienske proizvode za enkratno uporabo - Določevanje strižne odpornosti

General Information

• Status: Published
• Publication Date: 31-Jan-2002
• ICS: 83.180 - Adhesives
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Feb-2002
• Due Date: 01-Feb-2002
• Completion Date: 01-Feb-2002
• Ref Project: EN 12960:2001 - Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance

Relations

• Corrected By: SIST EN 12960:2002/AC:2007 - Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance
• Effective Date: 01-Oct-2007

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Klebstoffe für Papier, Verpackung und Hygieneprodukte - Bestimmung des ScherwiderstandesAdhésifs pour papier et carton, emballage et produits sanitaires a jeter - Détermination de la résistance au cisaillementAdhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 12960:2001SIST EN 12960:2002en01-februar-2002SIST EN 12960:2002SLOVENSKI
STANDARD



SIST EN 12960:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12960March 2001ICS 83.180English versionAdhesives for paper and board, packaging and disposablesanitary products - Determination of shear resistanceAdhésifs pour papier et carton, emballage et produitssanitaires à jeter - Détermination de la résistance aucisaillementKlebstoffe für Papier, Verpackung und Hygieneprodukte -Bestimmung des ScherwiderstandesThis European Standard was approved by CEN on 4 February 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12960:2001 ESIST EN 12960:2002



Page 2EN 12960:2001ContentsPageForeword.31Scope.42Normative references.43Terms and definitions.44Principle.45Safety.46Preparation of test specimens.47Conditioning.58Procedure.59Expression of results.610Test report.6SIST EN 12960:2002



Page 3EN 12960:2001ForewordThis European Standard has been prepared by Technical Committee CEN/TC 193 "Adhesives", the secretariat ofwhich is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by September 2001, and conflicting national standards shall be withdrawn at thelatest by September 2001.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United Kingdom.SIST EN 12960:2002



Page 4EN 12960:20011 ScopeThis European Standard specifies a test method for the determination of the shear resistance of an adhesive bondat constant static load and constant or increasing temperature.The test method is intended for ranking and quality control of adhesives and not for obtaining data for designpurposes.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other p
...