SIST EN 62148-15:2010
(Main)Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages (IEC 62148-15:2009)
Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages (IEC 62148-15:2009)
This part of IEC 62148 covers the physical dimension and interface specifications for the discrete vertical cavity surface emitting laser (VCSEL) devices in optical telecommunication and optical data transmission applications. The object of this standard is to adequately specify the physical requirements of VCSEL devices that will enable mechanical interchangeability of laser devices or transmitters complying with this standard both at the printed circuit wiring board and for any panelmounting requirement.
Aktive Lichtwellenleiterbauelemente und -geräte - Gehäuse- und Schnittstellennormen - Teil 15: Einzel-Gehäuse für Oberflächenemittierender Laser mit vertikalem Resonator (IEC 62148-15:2009)
Composants et dispositifs actifs à fibres optiques - Normes de boîtiers et d'interface - Partie 15 : Boîtiers discrets à laser émettant par la surface (CEI 62148-15:2009)
Aktivne komponente in naprave za optična vlakna - Standardi za okrove in vmesnike - 15. del: Okrovi diskretnih laserjev s površinsko emisijo in navpičnim resonatorjem (IEC 62148-15:2009)
Ta del IEC 62148 zajema specifikacije za fizične mere in vmesnike za naprave diskretnih laserjev s površinsko emisijo in navpičnim resonatorjem (VCSEL) pri optični telekomunikaciji in optičnem prenosu podatkov. Predmet tega standarda je ustrezno opredeliti fizične zahteve za naprave VCSEL, ki omogočajo mehansko zamenljivost laserskih naprav ali oddajnikov v skladu s tem standardom na plošči tiskanega vezja in za druge zahteve nameščanja plošč.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62148-15:2010
01-april-2010
$NWLYQHNRPSRQHQWHLQQDSUDYH]DRSWLþQDYODNQD6WDQGDUGL]DRNURYHLQ
YPHVQLNHGHO 2NURYLGLVNUHWQLKODVHUMHYVSRYUãLQVNRHPLVLMRLQQDYSLþQLP
UHVRQDWRUMHP ,(&
Fibre optic active components and devices - Package and interface standards - Part 15:
Discrete vertical cavity surface emitting laser packages (IEC 62148-15:2009)
Aktive Lichtwellenleiterbauelemente und -geräte - Gehäuse- und Schnittstellennormen -
Teil 15: Einzel-Gehäuse für Oberflächenemittierender Laser mit vertikalem Resonator
(IEC 62148-15:2009)
Composants et dispositifs actifs à fibres optiques - Normes de boîtiers et d'interface -
Partie 15 : Boîtiers discrets à laser émettant par la surface (CEI 62148-15:2009)
Ta slovenski standard je istoveten z: EN 62148-15:2010
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 62148-15:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62148-15:2010
---------------------- Page: 2 ----------------------
SIST EN 62148-15:2010
EUROPEAN STANDARD
EN 62148-15
NORME EUROPÉENNE
February 2010
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic active components and devices -
Package and interface standards -
Part 15: Discrete vertical cavity surface emitting laser packages
(IEC 62148-15:2009)
Composants et dispositifs actifs Aktive Lichtwellenleiterbauelemente
à fibres optiques - und -geräte -
Normes de boîtiers et d'interface - Gehäuse- und Schnittstellennormen -
Partie 15 : Boîtiers discrets Teil 15: Einzel-Gehäuse
à laser émettant par la surface für Oberflächenemittierender Laser
(CEI 62148-15:2009) mit vertikalem Resonator
(IEC 62148-15:2009)
This European Standard was approved by CENELEC on 2010-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62148-15:2010 E
---------------------- Page: 3 ----------------------
SIST EN 62148-15:2010
EN 62148-15:2010 - 2 -
Foreword
The text of document 86C/928/FDIS, future edition 1 of IEC 62148-15, prepared by SC 86C, Fibre optic
systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 62148-15 on 2010-02-01.
This standard is to be read in conjunction with EN 62148-1.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2013-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62148-15:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60130 NOTE Harmonized in EN 60130 series (not modified).
IEC 60191 NOTE Harmonized in EN 60191 series (not modified).
IEC 60603 NOTE Harmonized in EN 60603 series (not modified).
IEC 60794 NOTE Harmonized in EN 60794 series (partially modified).
IEC 60825 NOTE Harmonized in EN 60825 series (partially modified).
IEC 61076 NOTE Harmonized in EN 61076 series (not modified).
IEC 61280 NOTE Harmonized in EN 61280 series (not modified).
IEC 61281-1 NOTE Harmonized as EN 61281-1.
IEC 62007-1 NOTE Harmonized as EN 62007-1.
IEC 62007-2 NOTE Harmonized as EN 62007-2.
IEC 62149-2 NOTE Harmonized as EN 62149-2.
ISO 1101 NOTE Harmonized as EN ISO 1101.
__________
---------------------- Page: 4 ----------------------
SIST EN 62148-15:2010
- 3 - EN 62148-15:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60793-2 Series Optical fibres - EN 60793-2 Series
Part 2: Product specifications
IEC 60874 Series Connectors for optical fibres and cables EN 60874 Series
IEC 61754 Series Fibre optic connector interfaces EN 61754 Series
IEC 61754-4-1 - Fibre optic connector interfaces - EN 61754-4-1 -
Part 4-1: Type SC connector family -
Simplified receptacle SC-PC connector
interfaces
IEC 61754-20 - Fibre optic connector interfaces - EN 61754-20 -
Part 20: Type LC connector family
IEC 62148-1 - Fibre optic active components and devices - EN 62148-1 -
Package and interface standards -
Part 1: General and guidance
ITU-T - Characteristics of a single-mode optical fibre - -
Recommendation cable
G.652
---------------------- Page: 5 ----------------------
SIST EN 62148-15:2010
---------------------- Page: 6 ----------------------
SIST EN 62148-15:2010
IEC 62148-15
®
Edition 1.0 2009-12
INTERNATIONAL
STANDARD
Fibre optic active components and devices – Package and interface standards –
Part 15: Discrete vertical cavity surface emitting laser packages
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
Q
ICS 33.180.20 ISBN 2-8318-1072-6
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 7 ----------------------
SIST EN 62148-15:2010
– 2 – 62148-15 © IEC:2009(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope and object.7
2 Normative references .7
3 Terms, definitions and abbreviations .7
3.1 Terms and definitions .7
3.2 Abbreviations .7
4 Classification.8
5 Specification of the optical interface .8
5.1 General .8
5.2 Optical connector interface (type 1).8
5.3 Pigtail interface (type 3) .8
6 Specifications of electrical interfaces.8
6.1 General .8
6.2 Electrical interface specifications for VCSEL TO CAN packages.9
6.2.1 General .9
6.2.2 Numbering of electrical terminals.9
6.2.3 Electrical terminals assignment .9
6.3 Electrical interface specifications for VCSEL TOSA package with an LC
connector .10
6.3.1 General .10
6.3.2 Numbering of electrical terminals.10
6.3.3 Electrical terminal assignment .10
6.4 Electrical interface specifications for VCSEL TOSA package with an SC
connector .10
6.4.1 General .10
6.4.2 Numbering of electrical terminals.10
6.4.3 Electrical terminal assignment .11
7 Outline .11
7.1 General .11
7.2 Outline of VCSEL TO CAN packages.11
7.2.1 Drawings of case outline.11
7.2.2 Dimensions of VCSEL TO CAN packages.12
7.3 Outlines of VCSEL TOSA package with an LC connector .13
7.3.1 Drawings of case outline.13
7.3.2 Dimensions of VCSEL TOSA package with an LC connector .13
7.3.3 Optical receptacle LC style .14
7.4 Outlines of VCSEL TOSA package with an SC connector .14
7.4.1 Drawings of case outline.14
7.4.2 Dimensions of VCSEL TOSA package with a SC connector .14
7.4.3 Optical receptacle SC style.15
7.5 Outlines of VCSEL pigtail package .15
7.5.1 Drawings of case outline.15
7.5.2 Dimensions of VCSEL pigtail package .15
7.5.3 Optical connectors.16
Bibliography.17
---------------------- Page: 8 ----------------------
SIST EN 62148-15:2010
62148-15 © IEC:2009(E) – 3 –
Figure 1 – Electrical terminal numbering assignments of 3-pin and 4-pin types TO CAN
packages (viewed from bottom with pins).9
Figure 2 – Electrical terminal numbering assignments of 3-pin and 4-pin type TOSA
packages with a LC connector (viewed from bottom with pins) .10
Figure 3 – Electrical terminal numbering assignments of 3-pin and 4-pin type TOSA
packages with an SC connector (viewed from bottom with pins).11
Figure 4 – Schematic diagrams and pin-out of VCSEL TO CANs with a flat window,
with a ball lens, and with a tilted window.12
Figure 5 – Schematic diagram of VCSEL TOSA package with a LC connector .13
Figure 6 – Schematic diagram of VCSEL TOSA package with an SC connector .14
Figure 7 – Schematic diagram and pin-out of VCSEL pigtail package.15
Table 1 – Pin-function definitions of the 4-pin type VCSEL TO CAN packages .9
Table 2 – Pin-function definitions of the 3-pin type VCSEL TO CAN packages .10
Table 3 – Dimension of VCSEL TO CANs with a flat window, a ball lens and a tilted
window .13
Table 4 – Dimension of VCSEL TOSA package with an LC connector.13
Table 5 – Dimension of VCSEL TOSA package with a SC connector .14
Table 6 – Dimension of VCSEL pigtail package .16
---------------------- Page: 9 ----------------------
SIST EN 62148-15:2010
– 4 – 62148-15 © IEC:2009(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PACKAGE AND INTERFACE STANDARDS –
Part 15: Discrete vertical cavity surface emitting laser packages
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.