iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1991-1-2:2004/AC:2013

(Corrigendum)

Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire

Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire

TC - Modifications to "National annex for EN 1991-1-2", 1.6, Annex A, B.2, B.4.1 and B.4.2.

Eurocode 1 - Einwirkungen auf Tragwerke - Teil 1-2: Allgemeine Einwirkungen - Brandeinwirkungen auf Tragwerke

Eurocode 1: Actions sur les structures au feu - Partie 1-2: Actions générales - Actions sur les structures exposées

Evrokod 1: Vplivi na konstrukcije - 1-2. del: Splošni vplivi - Vplivi požara na konstrukcije - Popravek

(1) Metode, navedene v tem 1-2. delu EN 1991, se uporabljajo za stavbe in se nanašajo na požarno obtežbo v povezavi s stavbo in uporabniki (namembnostjo).
(2) Ta 1-2. del EN 1991 obravnava toplotne in mehanske vplive na konstrukcijo, izpostavljeno požaru. Namenjen je uporabi skupaj z deli standarda EN 1992 do EN 1996 in EN 1999 za požarno projektiranje, v katerih so navedena pravila za projektiranje konstrukcij z zahtevano požarno odpornostjo.
(3) Ta 1-2. del EN 1991 obravnava toplotne vplive, odvisne od nazivno in fizikalno določenih toplotnih učinkov. Več podatkov in modelov fizikalnega določanja toplotnih vplivov je navedenih v dodatkih.
(4) Ta 1-2. del EN 1991 razlaga splošna načela in pravila o uporabi v povezavi s toplotnimi in mehanskimi vplivi, ki naj se uporabijo v povezavi z EN 1990, EN 1991-1-1, EN 1991-1-3 in EN 1991-1-4.
(5) Ta dokument ne obsega ocene poškodbe konstrukcije po požaru.

General Information

Status
Published
Publication Date
19-Jun-2013
ICS
13.220.50 - Fire-resistance of building materials and elements
91.010.30 - Technical aspects
Technical Committee
KON - Structures
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
14-Feb-2013
Due Date
21-Apr-2013
Completion Date
20-Jun-2013
Directive
89/106/EEC - Construction products
TP001 - Pravilnik o mehanski odpornosti in stabilnosti objektov
TP237 - Pravilnik o spodnjem ustroju železniških prog
Mandate
M/265 - Mandate to CEN for the conversion of the Eurocodes from ENV into EN concerning the structural and geotechnical design of buildings and civil engineering works
M/BC/CEN/89/11 - Framework mandate to CEN on Eurocode work : execution of a standardization programme on Eurocodes for the structural design of building and civil engineering works
Ref Project
EN 1991-1-2:2002/AC:2013 - Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire

Relations

Replaces
SIST EN 1991-1-2:2004/AC:2009 - Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
Effective Date
01-Jul-2013
Replaced By
SIST EN 1991-1-2:2024 - Eurocode 1 - Actions on structures – Part 1-2: Actions on structures exposed to fire
Effective Date
01-Jul-2024
Corrects
SIST EN 1991-1-2:2004 - Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
Effective Date
01-Jul-2013

Buy Standard

EN 1991-1-2:2004/AC:2013EN 1991-1-2:2004/AC:2013
PreviousNext
Corrigendum
EN 1991-1-2:2004/AC:2013
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Evrokod 1: Vplivi na konstrukcije - 1-2. del: Splošni vplivi - Vplivi požara na konstrukcije - PopravekEurocode 1 - Einwirkungen auf Tragwerke - Teil 1-2: Allgemeine Einwirkungen - Brandeinwirkungen auf TragwerkeEurocode 1: Actions sur les structures au feu - Partie 1-2: Actions générales - Actions sur les structures exposéesEurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire91.010.30Technical aspects13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsICS:Ta slovenski standard je istoveten z:EN 1991-1-2:2002/AC:2013SIST EN 1991-1-2:2004/AC:2013en,fr,de01-julij-2013SIST EN 1991-1-2:2004/AC:2013SLOVENSKI
STANDARD



SIST EN 1991-1-2:2004/AC:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1991-1-2:2002/AC
February 2013
Février 2013
Februar 2013 ICS 91.010.30; 13.220.50 English version Version Française Deutsche Fassung
Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
Eurocode 1: Actions sur les structures au feu - Partie 1-2: Actions générales - Actions sur les structures exposées
Eurocode 1 - Einwirkungen auf Tragwerke - Teil 1-2: Allgemeine Einwirkungen - Brandeinwirkungen auf Tragwerke This corrigendum becomes effective on 6 February 2013 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 6 février 2013 pour incorporation dans les trois versions linguistiques officielles de la EN.
Die Berichtigung tritt am 6. Februar 2013 zur Einarbeitung in die drei offiziellen Sprachfassungen der EN in Kraft.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Tous droits d'exploitation sous quelque forme
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1993-1-2:2024(Main)
Eurocode 3 - Design of steel structures - Part 1-2: Structural fire design
EN 1993-1-2:2024

1.1   Scope of prEN 1993-1-2
(1) This document provides rules for the design of steel structures for the accidental situation of fire exposure. This Part of EN 1993 only identifies differences from, or supplements to, normal temperature design.
(2) This document applies to steel structures required to fulfil a loadbearing function.
(3) This document does not include rules for separating function.
(4) This document gives principles and application rules for the design of structures for specified requirements in respect of the aforementioned function and the levels of performance.
(5) This document applies to structures, or parts of structures, that are within the scope of EN 1993 1 1 and are designed accordingly.
(6) This document is intended to be used in conjunction with EN 1991-1-2, EN 1993-1-1, EN 1993 1-3, EN 1993-1-4, EN 1993-1-5, EN 1993-1-6, EN 1993-1-7, EN 1993-1-8, EN 1993-1-11, EN 1993-1-13 or EN 1993-1-14.
1.2   Assumptions
(1) Unless specifically stated, EN 1990, EN 1991(all parts) and EN 1993-1-1 apply.
(2) The design methods given in prEN 1993-1-2 are applicable if
-   the execution quality is as specified in EN 1090-2 and/or EN 1090-4, and
-   the construction materials and products used are as specified in prEN 1993-1-1:2020, Table 5.1 and Table 5.2 and in prEN 1993-1-3:2022, Table 5.1 and Table 5.2, or in the relevant material and product specifications.
(3) In addition to the general assumptions of EN 1990 the following assumptions apply:
-   the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation;
-   any fire protection measure taken into account in the design will be adequately maintained.

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1991-1-2:2024(Main)
Eurocode 1 - Actions on structures – Part 1-2: Actions on structures exposed to fire
EN 1991-1-2:2024

1.1   Scope of EN 1991 1 2
(1)   The methods given in this Eurocode are applicable to buildings and civil engineering works, with a fire load related to the building and its occupancy.
(2)   EN 1991 1 2 deals with thermal and mechanical actions on structures exposed to fire. It is intended to be used in conjunction with the fire design Parts of EN 1992 to EN 1996 and EN 1999 which give rules for designing structures for fire resistance.
(3)   EN 1991 1 2 contains thermal actions either nominal or physically based. More data and models for physically based thermal actions are given in annexes.
(4)   EN 1991 1 2 does not cover the assessment of the damage of a structure after a fire.
(5)   EN 1991 1 2 does not cover supplementary requirements concerning, for example:
-   the possible installation and maintenance of sprinkler systems;
-   conditions on occupancy of building or fire compartment;
-   the use of approved insulation and coating materials, including their maintenance.
1.2   Assumptions
(1)   In addition to the general assumptions of EN 1990 the following assumptions apply:
-   any active and passive fire protection systems taken into account in the design will be adequately maintained;
-   the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation.

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1992-1-2:2024(Main)
Eurocode 2 - Design of concrete structures – Part 1-2: Structural fire design
EN 1992-1-2:2023

(1) This document deals with the design of concrete structures for the accidental situation of fire
exposure and is intended to be used in conjunction with EN 1992-1-1 and EN 1991-1-2:—1. This
document identifies differences from, or supplements to, normal temperature design.
(2) This document applies to concrete structures required to fulfil a loadbearing function, separating
function, insulation function or all of them.
(3) This document gives principles and application rules for the design of structures for specified
requirements in respect of the aforementioned functions and the levels of performance.
(4) This document applies to structures, or parts of structures, that are within the scope of
EN 1992-1-1 and are designed accordingly.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1999-1-2:2023(Main)
Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
EN 1999-1-2:2023

1.1   Scope of EN 1999-1-2
(1)   EN 1999-1-2 deals with the design of aluminium structures for the accidental situation of fire exposure and is intended to be used in conjunction with EN 1999-1-1, EN 1999-1-2, EN 1999-1-3, EN 1999-1-4 and EN 1999-1-5. This document only identifies differences from, or supplements to, normal temperature design.
(2)   EN 1999-1-2 applies to aluminium structures required to fulfil a load bearing function.
(3)   EN 1999-1-2 gives principles and application rules for the design of structures for specified requirements in respect of the aforementioned function and the levels of performance.
(4)   EN 1999-1-2 applies to structures, or parts of structures, that are within the scope of EN 1999 1 1 and are designed accordingly.
(5)   The methods given in EN 1999-1-2 are applicable to the following aluminium alloys:
EN AW-3004 - H34   EN AW-5083 - O and H12   EN AW-6063 - T5 and T6
EN AW-5005  -  O and H34   EN AW-5454 - O and H34   EN AW-6082 - T4 and T6
EN AW-5052  - H34      EN AW-6061 - T6   
(6)   The methods given in EN 1999-1-2 are applicable also to other aluminium alloy/tempers of EN 1999 1-1, if reliable material properties at elevated temperatures are available or the simplified assumptions in 5.2.1 are applied.
1.2   Assumptions
(1)   In addition to the general assumptions of EN 1990, the following assumptions apply:
-   the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation.
-   any active and passive fire protection systems taken into account in the design will be adequately maintained.
(2)   For the design of new structures, EN 1999 is intended to be used, for direct application, together with EN 1990, EN 1991, EN 1992, EN 1993, EN 1994, EN 1995, EN 1997, EN 1998 and EN 1999.
(3)   EN 1999 is intended to be used in conjunction with:
-   European Standards for construction products relevant for aluminium structures
-   EN 1090-1, Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
-   EN 1090-3, Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1992-1-2:2005/A1:2019(Amendment)
Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design
EN 1992-1-2:2004/A1:2019

DOP of 12 months!

  • Amendment
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1991-1-2:2004/A101:2006(Slovenian language)
Evrokod 1: Vplivi na konstrukcije – 1-2. del: Splošni vplivi – Vplivi požara na konstrukcije – Nacionalni dodatek
  • National annex
    3 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1996-1-2:2005/AC:2011(Corrigendum)
Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
EN 1996-1-2:2005/AC:2010

(1)P This Part 1-2 of EN 1996 deals with the design of masonry structures for the accidental situation of fire exposure, and is intended to be used in conjunction with EN 1996-1-1, EN 1996-2, 1996-3 and EN 1991-1-2. This part 1-2 only identifies differences from, or supplements to, normal temperature design.
(2)P This Part 1-2 deals only with passive methods of fire protection. Active methods are not
covered.
(3)P This Part 1-2 applies to masonry structures which, for reasons of general fire safety, are required to fulfil certain functions when exposed to fire, in terms of:
- avoiding premature collapse of the structure (load bearing function)
- limiting fire spread (flames, hot gases, excessive heat) beyond designated areas (separating function)
(4)P This Part 1-2 gives principles and application rules for designing structures for specified requirements in respect of the aforementioned functions and levels of performance.
(5)P This Part 1-2 applies to structures, or parts of structures, that are within the scope of EN 1996-1-1, EN 1996-2 and EN 1996-3 and are designed accordingly.
(6)P This Part 1-2 does not cover masonry built with Natural Stone units to EN771-6
(7)P This Part 1-2 deals with the following:
- non-loadbearing internal walls.
- non-loadbearing external walls.
- loadbearing internal walls with separating or non-separating functions.
- loadbearing external walls with separating or non-separating functions.

  • Corrigendum
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1995-1-2:2005/AC:2009(Corrigendum)
Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design
EN 1995-1-2:2004/AC:2009

This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments).

  • Corrigendum
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1992-1-2:2005/A101:2009
Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design - National annex
  • National annex
    3 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1995-1-2:2005/A101:2009
Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design - National annex
  • National annex
    2 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day