SIST EN 747-2:2012/kFprA1:2015

Furniture - Bunk beds and high beds - Part 2: Test methods

This European Standard specifies test methods for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use. The loads and forces in the strength and durability tests apply to beds with an internal length greater than 140 cm and a maximum bed base width of 120 cm.
The tests are designed to be applied to a bed that is fully assembled and ready for use.
The applicable safety requirements are given in EN 747-1.

Möbel - Etagenbetten und Hochbetten - Teil 2: Prüfverfahren

Meubles - Lits superposés et lits surélevés - Partie 2: Méthodes d'essai

Pohištvo - Pogradi in visoke postelje - 2. del: Preskusne metode - Dopolnilo A1

General Information

• Status: Not Published
• Public Enquiry End Date: 09-Dec-2013
• ICS: 97.140 - Furniture
• Technical Committee: POH - Furniture
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 07-Feb-2018
• Due Date: 12-Feb-2018
• Completion Date: 07-Feb-2018
• Ref Project: EN 747-2:2012/FprA1 - Furniture - Bunk beds and high beds - Part 2: Test methods

Relations

• Consolidated By: SIST EN 747-2:2012+A1:2015 - Furniture - Bunk beds and high beds - Part 2: Test methods
• Effective Date: 18-Jan-2023
• Revised: SIST EN 747-2:2012 - Furniture - Bunk beds and high beds - Part 2: Test methods
• Effective Date: 01-Nov-2013
• Consolidated By: SIST EN 747-2:2012+A1:2015 - Furniture - Bunk beds and high beds - Part 2: Test methods
• Effective Date: 19-Jan-2023
• Consolidated By: SIST EN 747-2:2012+A1:2015 - Furniture - Bunk beds and high beds - Part 2: Test methods
• Effective Date: 01-Sep-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 747-2:2012/oprA1:2013
01-november-2013
Pohištvo - Pogradi in visoke postelje - 2. del: Preskusne metode - Dopolnilo A1
Furniture - Bunk beds and high beds - Part 2: Test methods
Möbel - Etagenbetten und Hochbetten - Teil 2: Prüfverfahren
Meubles - Lits superposés et lits surélevés - Partie 2: Méthodes d'essai
Ta slovenski standard je istoveten z: EN 747-2:2012/prA1
ICS:
97.140 Pohištvo Furniture
SIST EN 747-2:2012/oprA1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 747-2:2012/oprA1:2013

---------------------- Page: 2 ----------------------

SIST EN 747-2:2012/oprA1:2013


EUROPEAN STANDARD
DRAFT
EN 747-2:2012
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
September 2013
ICS 97.140
English Version
Furniture - Bunk beds and high beds - Part 2: Test methods
Meubles - Lits superposés et lits surélevés - Partie 2: Möbel - Etagenbetten und Hochbetten - Teil 2:
Méthodes d'essai Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 207.

This draft amendment A1, if approved, will modify the European Standard EN 747-2:2012. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 747-2:2012/prA1:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 747-2:2012/oprA1:2013
EN 747-2:2012/prA1:2013 (E)
Contents
Page
Foreword .3
1 Modifications to clause 4 .4
2 Modifications to clause 5 .4



2

---------------------- Page: 4 ----------------------

SIST EN 747-2:2012/oprA1:2013
EN 747-2:2012/prA1:2013 (E)
Foreword
This document (EN 747-2:2012/prA1:2013) has been prepared by Technical Committee CEN/TC 207
“Furniture”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
3

---------------------- Page: 5 ----------------------

SIST EN 747-2:2012/oprA1:2013
EN 747-2:2012/prA1:2013 (E)
1 Modifications to clause 4
Add a new sub-clause 4.10 as follows:
4.10 Template for V-shaped openings
The template for V and irregular shaped openings shall be
...