SIST EN 60335-2-44:2003
(Main)Household and similar electrical appliances - Safety -- Part 2-44: Particular requirements for ironers
Household and similar electrical appliances - Safety -- Part 2-44: Particular requirements for ironers
Deals with the safety of electric ironers for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Appliances not intended for normal household use but which nevertheless may be a sourve of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke -- Teil 2-44: Besondere Anforderungen für Bügelmaschinen und Bügelpressen
Appareils électrodomestiques et analogues - Sécurité -- Partie 2-44: Régles particulières pour les machines à repasser
Traite de la sécurité des machines à repasser électriques pour usage domestiques, dans des magasins et chez des artisans. Comme exemples sont inclus les machines à repasser électriques à rouleaux, les presses à repasser, les presses-pantalons et les machines à lisser le linge.
Gospodinjski in podobni električni aparati - Varnost - 2-44. del: Posebne zahteve za likalne stroje (IEC 60335-2-44:2002)
Obravnava varnost električnih likalnih strojev za gospodinjske in podobne namene, katerih nazivna napetost ne presega 250 V za enofazne aparate in 480 V za druge aparate. Področje uporabe tega standarda zajema aparate, ki niso namenjeni za običajno gospodinjsko uporabo, vendar so lahko vir nevarnosti za javnost, kot so aparati, namenjeni za laično uporabo v trgovinah, lahki industriji in na kmetijah.
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60335-2-44:2003
STANDARD
september 2003
Gospodinjski in podobni električni aparati - Varnost - 2-44. del: Posebne
zahteve za električne likalne stroje (IEC 60335-2-44:2002)
Household and similar electrical appliances - Safety - Part 2-44: Particular
requirements for ironers
ICS 97.060 Referenčna številka
SIST EN 60335-2-44:2003(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60335-2-44
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2002
ICS 97.060 Supersedes EN 60335-2-44:1997
English version
Household and similar electrical appliances -
Safety
Part 2-44: Particular requirements for ironers
(IEC 60335-2-44:2002)
Appareils électrodomestiques et Sicherheit elektrischer Geräte für den
analogues - Sécurité Hausgebrauch und ähnliche Zwecke
Partie 2-44: Régles particulières Teil 2-44: Besondere Anforderungen
pour les machines à repasser für Bügelmaschinen und Bügelpressen
(CEI 60335-2-44:2002) (IEC 60335-2-44:2002)
This European Standard was approved by CENELEC on 2002-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60335-2-44:2002 E
---------------------- Page: 2 ----------------------
EN 60335-2-44:2002 - 2 -
Foreword
The text of document 61/2167/FDIS, future third edition of IEC 60335-2-44, prepared by the IEC Technical
Committee 61, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60335-2-44 on 2002-11-01.
This European Standard replaces EN 60335-2-44:1997.
The following dates are applicable:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-08-01
- date on which national standards
conflicting with the EN have to be withdrawn (dow) 2005-11-01
This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances –
Safety – Part 1: General requirements. It was established on the basis of the 2002 edition of that standard.
Amendments and revisions of Part 1 have also to be taken into account and the dates when such
changes become applicable will be stated in the relevant amendment or revision of Part 1.
This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the
European Standard: Safety requirements for electric ironers.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is
reasonable. When this standard states "addition", "modification" or "replacement", the relevant text of
Part 1 is to be adapted accordingly.
NOTE 1 The following numbering system is used:
- subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
- unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a
replaced clause or subclause;
- additional annexes are lettered AA, BB, etc.;
- subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z.
NOTE 2 The following print types are used:
- requirements: in roman type;
- test specifications: in italic type;
- notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun
are also in bold.
There are no special national conditions causing a deviation from this European Standard, other than
those listed in Annex ZA to EN 60335-1.
There are no national deviations from this European Standard, other than those listed in Annex ZB to
EN 60335-1.
p NOTE In this document, p is used in the margin to indicate instructions for preparing the printed version.
_____________
---------------------- Page: 3 ----------------------
- 3 - EN 60335-2-44:2002
Introduction
p Add:
An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this
standard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical
moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that
the risks are mainly of electrical origin and consequently this directive is not applicable. However, the
relevant essential safety requirements of the Machinery Directive are covered by this standard together
with the principal objectives of the Low Voltage Directive.
____________
Endorsement notice
The text of the International Standard IEC 60335-2-44:2002 was approved by CENELEC as a European
Standard without any modification.
____________
---------------------- Page: 4 ----------------------
NORME CEI
INTERNATIONALE IEC
60335-2-44
INTERNATIONAL
Troisième édition
STANDARD
Third edition
2002-09
Appareils électrodomestiques et analogues –
Sécurité –
Partie 2-44:
Règles particulières pour les machines
à repasser
Household and similar electrical appliances –
Safety –
Part 2-44:
Particular requirements for ironers
Numéro de référence
Reference number
CEI/IEC 60335-2-44:2003
---------------------- Page: 5 ----------------------
60335-2-44 IEC:2003 – 3 –
CONTENTS
FOREWORD . 5
INTRODUCTION .9
1 Scope .11
2 Normative references.11
3 Definitions .13
4 General requirement .15
5 General conditions for the tests .15
6 Classification .15
7 Marking and instructions .15
8 Protection against access to live parts .15
9 Starting of motor-operated appliances .15
10 Power input and current.15
11 Heating.17
12 Void .17
13 Leakage current and electric strength at operating temperature .17
14 Transient overvoltages.17
15 Moisture resistance.17
16 Leakage current and electric strength .19
17 Overload protection of transformers and associated circuits.19
18 Endurance .19
19 Abnormal operation.19
20 Stability and mechanical hazards.19
21 Mechanical strength.21
22 Construction .21
23 Internal wiring.23
24 Components .25
25 Supply connection and external flexible cords.25
26 Terminals for external conductors .25
27 Provision for earthing.25
28 Screws and connections .25
29 Clearances, creepage distances and solid insulation .25
30 Resistance to heat and fire .25
31 Resistance to rusting .25
32 Radiation, toxicity and similar hazards .25
Annexes.29
Bibliography.29
Figure 101 – Dimensions of the feed opening of mangles.27
---------------------- Page: 6 ----------------------
60335-2-44 IEC:2003 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-44: Particular requirements for ironers
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
This part of International Standard IEC 60335 has been prepared by IEC technical committee
61: Safety of household and similar electrical appliances.
This third edition cancels and replaces the second edition published in 1997. It constitutes a
technical revision.
This bilingual version (2003-10) replaces the English version.
The text of this part of IEC 60335 is based on the following documents:
FDIS Report on voting
61/2167/FDIS 61/2247/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
---------------------- Page: 7 ----------------------
60335-2-44 IEC:2003 – 7 –
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its
amendments. It was established on the basis of the fourth edition (2001) of that standard.
NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1.
This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to
convert that publication into the IEC standard: Safety requirements for electric ironers.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies
as far as is reasonable. When this standard states "addition", "modification", or "replacement",
the relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including
those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
NOTE 3 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the
associated noun are also in bold.
The committee has decided that the contents of this publication will remain unchanged until
2004. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
The following differences exist in the countries indicated below.
– 11.7: The test conditions are different (USA).
– 19.13: The test criteria are different
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.