oSIST prEN 4700-001:2024

Aerospace series - Steel and heat-resisting alloys - Wrought products - Technical specification - Part 001: Plates, sheets and strips

This document specifies the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat-resisting (cobalt, nickel and iron-based alloys) alloy plates, sheets and strips. It is presupposed to be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.

Luft- und Raumfahrt - Stahl und Hochwarmfesten Legierungen - Umgeformte Erzeugnisse - Technische Lieferbedingungen - Teil 001: Platten, Bleche und Bänder

Série aérospatiale - Aciers et alliages résistant à chaud - Produits corroyés - Spécification technique - Partie 001 : Plaques, tôles et bandes

Le présent document spécifie les exigences relatives aux commandes, à la fabrication, aux essais, aux contrôles et à la livraison des plaques, tôles et bandes en acier et alliages (cobalt, nickel et alliages ferreux) résistant à chaud. Il est supposé être appliqué lorsqu'il est cité en référence et conjointement avec la norme de matériau EN sauf spécification contraire figurant sur le dessin, la commande ou la fiche d'essais.

Aeronavtika - Jeklo in zlitine, odporne proti vročini - Gneteni izdelki - Tehnična specifikacija - 001. del: Plošče, pločevine in trakovi

General Information

• Status: Not Published
• Public Enquiry End Date: 30-May-2024
• ICS: 49.025.10 - Steels
• ICS: 77.140.50 - Flat steel products and semi-products
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 25-Mar-2024
• Due Date: 12-Aug-2024
• Ref Project: prEN 4700-001 - Aerospace series - Steel and heat-resisting alloys - Wrought products - Technical specification - Part 001: Plates, sheets and strips

Relations

• Revises: SIST EN 4700-001:2011 - Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip
• Effective Date: 30-Aug-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4700-001:2024
01-maj-2024
Aeronavtika - Jeklo in zlitine, odporne proti vročini - Gneteni izdelki - Tehnična
specifikacija - 001. del: Plošče, pločevine in trakovi
Aerospace series - Steel and heat-resisting alloys - Wrought products - Technical
specification - Part 001: Plates, sheets and strips
Luft- und Raumfahrt - Stahl und Hochwarmfesten Legierungen - Umgeformte
Erzeugnisse - Technische Lieferbedingungen - Teil 001: Platten, Bleche und Bänder
Série aérospatiale - Aciers et alliages résistant à chaud - Produits corroyés -
Spécification technique - Partie 001 : Plaques, tôles et bandes
Ta slovenski standard je istoveten z: prEN 4700-001
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
oSIST prEN 4700-001:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4700-001:2024

---------------------- Page: 2 ----------------------
oSIST prEN 4700-001:2024


DRAFT
EUROPEAN STANDARD
prEN 4700-001
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2024
ICS 49.025.10 Will supersede EN 4700-001:2010
English Version

Aerospace series - Steel and heat-resisting alloys -
Wrought products - Technical specification - Part 001:
Plates, sheets and strips
Série aérospatiale - Aciers et alliages résistant à chaud - Luft- und Raumfahrt - Stahl und Hochwarmfesten
Produits corroyés - Spécification technique - Partie 001 Legierungen - Umgeformte Erzeugnisse - Technische
: Plaques, tôles et bandes Lieferbedingungen - Teil 001: Platten, Bleche und
Bänder
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4700-001:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 4700-001:2024
prEN 4700-001:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 7
4 Wording of order . 7
5 Health and safety . 7
6 Technical requirements . 8
6.1 General.
...