Low-voltage surge protective devices - Part 01: General Requirements and test methods

Parafoudres basse tension - Partie 01: Exigences générales et méthodes d’essai

Nizkonapetostne naprave za zaščito pred prenapetostnimi udari - 1. del: Splošne zahteve in preskusne metode - Dpoplnilo AA

General Information

Status
Not Published
Public Enquiry End Date
25-Jan-2024
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
08-Nov-2023
Due Date
27-Mar-2024

Relations

Buy Standard

Draft
prEN IEC 61643-01:2024/oprAA:2024
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 61643-01:2024/oprAA:2024
01-januar-2024
Nizkonapetostne naprave za zaščito pred prenapetostnimi udari - 1. del: Splošne
zahteve in preskusne metode - Dpoplnilo AA
Low-voltage surge protective devices - Part 01: General Requirements and test methods
Ta slovenski standard je istoveten z: prEN IEC 61643-01:2023/prAA:2023
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
nadtokovna zaščita protection devices
29.240.10 Transformatorske postaje. Substations. Surge arresters
Prenapetostni odvodniki
oSIST prEN IEC 61643- en
01:2024/oprAA:2024
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 61643-01:2024/oprAA:2024

---------------------- Page: 2 ----------------------
oSIST prEN IEC 61643-01:2024/oprAA:2024


EUROPEAN STANDARD DRAFT
prEN IEC 61643-01
NORME EUROPÉENNE

EUROPÄISCHE NORM
prAA
November 2023
ICS 29.240.10 -
English Version
Low-voltage surge protective devices - Part 01: General
Requirements and test methods
To be completed To be completed
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 61643-01; it is submitted to CENELEC members for
enquiry.
Deadline for CENELEC: 2024-01-26.

It has been drawn up by CLC/TC 37A.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 78483 Ref. No. prEN IEC 61643-01:2023/prAA:2023 E

---------------------- Page: 3 ----------------------
oSIST prEN IEC 61643-01:2024/oprAA:2024
prEN IEC 61643-01:2023/prAA:2023 (E)
1 Contents Page
2 European foreword . 3
3 1 Modification to 8.5.6.1, . 4
4 2 Modification to 8.5.6.2, . 4
5 3 Addition of subclause 8.7, “Additional information if declared by the manufacturer -
6 Vibration and shock” . 4
7 4 Modification to Table 3, “Pass criteria for type tests” . 4
8 5 Modification to Table 16, “Cross-sections of copper conductors for screw-type or
9 screwless terminals” . 4
10 6 Modification to A.1, “Routine tests” . 4
11 7 Modification to G.2.2, “Preconditioning procedure” . 4
12 8 Addition of Annex ZB, “Vibration and shock test” . 4
13 Annex ZA (normative) Normative references to international publications with their
14 corresponding European publications .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.