SIST EN 60317-25:2001
(Main)Specifications for particular types of winding wires -- Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200
Specifications for particular types of winding wires -- Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200
Former HD 555.25 S2
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten -- Teil 25: Runddrähte aus Aluminium, lackisoliert mit Polyester oder Polyesterimid und darüber mit Polyamidimid, Klasse 200
Spécifications pour types particuliers de fils de bobinage -- Partie 25: Fil de section circulaire en aluminium émaillé avec polyester ou polyesterimide et avec surcouche polyamide-imide, classe 200
Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60317-25:2001
01-september-2001
Specifications for particular types of winding wires - Part 25: Polyester or
polyesterimide overcoated with polyamide-imide enamelled round aluminium wire,
class 200
Specifications for particular types of winding wires -- Part 25: Polyester or polyesterimide
overcoated with polyamide-imide enamelled round aluminium wire, class 200
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten -- Teil 25:
Runddrähte aus Aluminium, lackisoliert mit Polyester oder Polyesterimid und darüber mit
Polyamidimid, Klasse 200
Spécifications pour types particuliers de fils de bobinage -- Partie 25: Fil de section
circulaire en aluminium émaillé avec polyester ou polyesterimide et avec surcouche
polyamide-imide, classe 200
Ta slovenski standard je istoveten z: EN 60317-25:1996
ICS:
29.060.10 Žice Wires
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 60317-25:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60317-25:2001
---------------------- Page: 2 ----------------------
SIST EN 60317-25:2001
---------------------- Page: 3 ----------------------
SIST EN 60317-25:2001
---------------------- Page: 4 ----------------------
SIST EN 60317-25:2001
---------------------- Page: 5 ----------------------
SIST EN 60317-25:2001
---------------------- Page: 6 ----------------------
SIST EN 60317-25:2001
NORME
CEI
INTERNATIONALE IEC
317-25
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
1990-10
Spécifications pour types particuliers
de fils de bobinage
Partie 25:
Fil de section circulaire en aluminium émaillé
avec polyester ou polyesterimide et
avec surcouche polyamide-imide, classe 200
Specifications for particular types
of winding wires
Part 25:
Polyester or polyesterimide overcoated
with polyamide
-imide enamelled
round aluminium wire, class 200
© CEI 1990 Droits de rep
roduction réservés — Copyright — all rights reserved
Aucune partie de cette publication ne peut fifre reproduite ni No part
of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun pro- any form or by any means, electronic or mechanical,
cédé, électronique ou mécanique, y compris la photocopie et including photocopying and microfilm, without permission
les microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher.
Bureau Central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève, Suisse
Commission Electrotechnique Internationale CODE PRIX
J
International Electrotechnical Commission
PRICE CODE
IEC MeautriapoaHaa 3netnparexrntvec,taa KoMwccsia
• Pour prix, voir catalogue en vigueur •
For price, see current catalogue
---------------------- Page: 7 ----------------------
SIST EN 60317-25:2001
317-25 ©IEC – 3 –
CONTENTS
Page
FOREWORD 5
INTRODUCTION 7
Clause
1 Scope 9
2 Normative references 9
11 3 Definitions and general notes on methods of test
11
4 Dimensions
11
5 Electrical resistance
11 6 Elongation
11
7 Springiness
11
8 Flexibility and adherence
11
9 Heat shock
10 Cut-through 11
11 11 Resistance to abrasion
13
12 Resistance to solvents
13
13 Breakdown voltage
14 Continuity of insulation 13
15 Temperature index 13
15
16 Resistance to refrigerants
15
17 Solderability
15
18 Heat or solvent bonding
15
19 Dielectric dissipation factor
15
20 Resistance to transformer oil
15
21 Loss of mass
17
22 High temperature failure
17
30 Packaging
---------------------- Page: 8 ----------------------
SIST EN 60317-25:2001
317-25 © IEC – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
SPECIFICATIONS FOR PARTICULAR TYPES
OF WINDING WIRES
Part 25: Polyester or polyesterimide
overcoated with polyamide-imide
enamelled round aluminium wire, class 200
FOREWORD
1) The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
2) They have the form of recommendations for international use and they are accepted by the National
Committees in that sense.
3) In order to promote international unification, the IEC expresses the wish that all National Committees
317-25should adopt the text of the IEC recommendation for their national rules in so far as national
conditions will permit. Any divergence between the IEC recommendation and the corresponding national
rules should, as far as possible, be clearly indicated in the latter.
This International Standard has been prepared by IEC Technical Committee No. 55:
Winding wires.
This second edition of IEC 317-25 replaces the first edition issued in 1988.
The text of IEC 182
It has been decided to issue IEC 182 and IEC 317 in a new layout.
has been incorporated into the relevant IEC 317 without technical changes. All general
requirements for enamelled round aluminium wires have been removed to IEC 317-0-3
without technical changes unless stated in the foreword of IEC 317-0-3.
---------------------- Page: 9 ----------------------
SIST EN 60317-25:2001
317-25 © IEC – 7
INTRODUCTION
This International Standard is one of a series which deals with insulated wires used for
windings in electrical equipment. The series has three groups describing:
1) methods of test (IEC 851) ;
2) specifications (IEC 317);
3) packaging (IEC 264).
---------------------- Page: 10 ----------------------
SIST EN 60317-25:2001
317-25 © IEC - 9 -
SPECIFICATIONS
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.