iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60317-68:2017/A1:2019

(Amendment)

Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 (IEC 60317-68:2017/A1:2019)

Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 (IEC 60317-68:2017/A1:2019)

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 68: Flachdrähte aus Aluminium, lackisoliert mit Polyvinylacetal Klasse 120 (IEC 60317-68:2017/A1:2019)

Spécifications pour types particuliers de fils de bobinage - Partie 68: Fil d’aluminium de section rectangulaire émaillé d’acétal de polyvinyle, classe 120 (IEC 60317-68:2017/A1:2019)

Specifikacije za posebne vrste navijalnih žic - 68. del: Aluminijasta žica s pravokotnim prerezom, emajlirana s polivinil acetalom, razred 120 - Dopolnilo A1 (IEC 60317-68:2017/A1:2019)

General Information

Status
Published
Publication Date
18-Aug-2019
ICS
29.060.10 - Wires
77.150.10 - Aluminium products
Technical Committee
I09 - Imaginarni 09
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Aug-2019
Due Date
06-Oct-2019
Completion Date
19-Aug-2019
Ref Project
EN 60317-68:2017/A1:2019 - Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120

Relations

Amends
SIST EN 60317-68:2017 - Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 (IEC 60317-68:2017)
Effective Date
31-Jul-2018

Buy Standard

EN 60317-68:2017/A1:2019EN 60317-68:2017/A1:2019
PreviousNext
Amendment
EN 60317-68:2017/A1:2019
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60317-68:2017/A1:2019
01-oktober-2019
Specifikacije za posebne vrste navijalnih žic - 68. del: Aluminijasta žica s
pravokotnim prerezom, emajlirana s polivinil acetalom, razred 120 - Dopolnilo A1
(IEC 60317-68:2017/A1:2019)
Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled
rectangular aluminium wire, class 120 (IEC 60317-68:2017/A1:2019)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 68:
Flachdrähte aus Aluminium, lackisoliert mit Polyvinylacetal Klasse 120 (IEC 60317-
68:2017/A1:2019)
Spécifications pour types particuliers de fils de bobinage - Partie 68: Fil d’aluminium de
section rectangulaire émaillé d’acétal de polyvinyle, classe 120 (IEC 60317-
68:2017/A1:2019)
Ta slovenski standard je istoveten z: EN 60317-68:2017/A1:2019
ICS:
29.060.10 Žice Wires
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 60317-68:2017/A1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60317-68:2017/A1:2019

---------------------- Page: 2 ----------------------

SIST EN 60317-68:2017/A1:2019


EUROPEAN STANDARD EN 60317-68:2017/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2019
ICS 29.060.10

English Version
Specifications for particular types of winding wires - Part 68:
Polyvinyl acetal enamelled rectangular aluminium wire, class 120
(IEC 60317-68:2017/A1:2019)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 68: Fil d'aluminium de section rectangulaire émaillé Wickeldrähten - Teil 68: Flachdrähte aus Aluminium,
d'acétal de polyvinyle, classe 120 lackisoliert mit Polyvinylacetal Klasse 120
(IEC 60317-68:2017/A1:2019) (IEC 60317-68:2017/A1:2019)
This amendment A1 modifies the European Standard EN 60317-68:2017; it was approved by CENELEC on 2019-07-17. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60317-68:2017/A1:2019 E

---------------------- Page: 3 ----------------------

SIST EN 60317-68:2017/A1:2019


EN 60317-68:2017/A1:2019 (E)

European foreword
The text of document 55/1694/
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60317-25:2020(Main)
Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 (IEC 60317-25:2020)
EN IEC 60317-25:2020

This part of IEC 60317 specifies the requirements of enamelled round aluminium winding
wires of class 200 with a dual coating. The underlying coating is based on polyester or
polyesterimide resin, which can be modified provided it retains the chemical identity of the
original resin and meets all specified wire requirements. The superimposed coating is based
on polyamide-imide resin.
NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to
enhance certain performance or application characteristics.
The range of nominal conductor diameters covered by this document is:
– Grade 1: 0,250 mm up to and including 3,150 mm;
– Grade 2: 0,250 mm up to and including 5,000 mm.
The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-3:2008 and
IEC 60317-0-3:2008/AMD1:2013.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60317-27-2:2020(Main)
Specifications for particular types of winding wires - Part 27-2: Paper tape covered round aluminum wire (IEC 60317-27-2:2020)
EN IEC 60317-27-2:2020

This part of IEC 60317 specifies the requirements of paper tape covered round aluminium
winding wires. This covering consists of two or more layers of paper tape and is primarily
intended for winding coils for oil immersed transformers.
The range of nominal conductor diameters covered by this document is:
– 0,500 mm up to and including 5,000 mm.
The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-3:2008 and
IEC 60317-0-3:2008/AMD1:2013.
The paper tapes included in this document are restricted to those covered in IEC 60554-1 and
IEC 60554-3-5.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60317-27-4:2020(Main)
Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminum wire (IEC 60317-27-4:2020)
EN IEC 60317-27-4:2020

This part of IEC 60317 specifies the requirements of paper tape covered rectangular aluminium
winding wires. This covering consists of two or more layers of paper tape and is primarily
intended for winding coils for oil immersed transformers.
The range of nominal conductor dimensions covered by this document is:
– width: min. 2,00 mm max. 16,0 mm;
– thickness: min. 0,80 mm max. 5,60 mm.
The paper tapes included in this document are restricted to those specified in IEC 60554-1 and
IEC 60554-3-5.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60317-0-3:2008/A2:2019(Amendment)
Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire (IEC 60317-0-3:2008/A2:2019)
EN 60317-0-3:2008/A2:2019

This part of IEC 60317 specifies the general requirements of enamelled round aluminium winding wires with or without a bonding layer. The range of nominal conductor diameters is given in the relevant specification sheet. When reference is made to a winding wire according to a standard of the IEC 60317 series mentioned under Clause 2, the following information is given in the description: - reference to IEC specification; - nominal conductor diameter, in millimetres; - grade.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60317-73:2018(Main)
Specifications for particular types of winding wires - Part 73: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 200 (IEC 60317-73:2018)
EN IEC 60317-73:2018

This part of IEC 60317 specifies the requirements of enamelled rectangular aluminium
winding wire of class 200 with a dual coating. The underlying coating is based on polyester or
polyesterimide resin, which can be modified providing it retains the chemical identity of the
original resin and meets all specified wire requirements. The superimposed coating is based
on polyamide-imide resin.
NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to
enhance certain performance or application characteristics.
The range of nominal conductor dimensions covered by this standard is:
– width: min. 2,0 mm max. 16,0 mm;
– thickness: min. 0,80 mm max. 5,60 mm.
Wires of grade 1 and grade 2 are included in this specification and apply to the complete
range of conductors.
The specified combinations of width and thickness as well as the specified width/thickness
ratio are given in IEC 60317-0-9:2015.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60317-74:2018(Main)
Specifications for particular types of winding wires - Part 74: Polyesterimide enamelled rectangular aluminium wire, class 180 (IEC 60317-74:2018)
EN IEC 60317-74:2018

This part of IEC 60317 specifies the requirements of enamelled rectangular aluminium
winding wire of class 180 with a sole coating based on polyesterimide resin, which can be
modified providing it retains the chemical identity of the original resin and meets all specified
wire requirements.
NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to
enhance certain performance or application characteristics.
The range of nominal conductor dimensions covered by this standard is:
– width: min. 2,0 mm max. 16,0 mm;
– thickness: min. 0,80 mm max. 5,60 mm.
Wires of grade 1 and grade 2 are included in this specification and apply to the complete
range of conductors.
The specified combinations of width and thickness as well as the specified width/thickness
ratio are given in IEC 60317-0-9:2015.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60317-69:2017(Main)
Specifications for particular types of winding wires - Part 69: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 220 (IEC 60317-69:2017)
EN 60317-69:2017

This part of IEC 60317 specifies the requirements of enamelled rectangular aluminium
winding wire of class 220 with a dual coating. The underlying coating is based on polyester or
polyesterimide resin, which may be modified providing it retains the chemical identity of the
original resin and meets all specified wire requirements. The superimposed coating is based
on polyamide-imide resin.
NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to
enhance certain performance of application characteristics.
Wires of grade 1 and grade 2 are included in this part of IEC 60317 and apply to the complete
range of conductors.
The specified combinations of width and thickness as well as the specific ratio width/thickness
are given in IEC 60317-0-9.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60317-67:2017(Main)
Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105 (IEC 60317-67:2017)
EN 60317-67:2017

This part of IEC 60317 specifies the requirements of enamelled rectangular aluminium
winding wire of class 105 with a sole coating based on polyvinyl acetal resin, which may be
modified providing it retains the chemical identity of the original resin and meets all specified
wire requirements.
NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to
enhance certain performance of application characteristics.
Wires of grade 1 and grade 2 are included in this part of IEC 60317 and apply to the complete
range of conductors.
The specified combinations of width and thickness as well as the specific ratio width/thickness
are given in IEC 60317-0-9.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60317-68:2017(Main)
Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 (IEC 60317-68:2017)
EN 60317-68:2017

This part of IEC 60317 specifies the requirements of enamelled rectangular aluminium
winding wire of class 120 with a sole coating based on polyvinyl acetal resin, which may be
modified providing it retains the chemical identity of the original resin and meets all specified
wire requirements.
NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to
enhance certain performance of application characteristics.
Wires of grade 1 and grade 2 are included in this part of IEC 60317 and apply to the complete
range of conductors.
The specified combinations of width and thickness as well as the specific ratio width/thickness
are given in IEC 60317-0-9.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60317-0-9:2016(Main)
Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire
EN 60317-0-9:2015

This part of IEC 60317 specifies the general requirements of enamelled rectangular
aluminium winding wires.
The range of nominal conductor dimensions is given in the relevant specification sheet.
When reference is made to a winding wire according to a standard of the IEC 60317 series
mentioned under Clause 2, the following information is given in the description:
– reference to IEC specification;
– nominal conductor dimensions in millimetres (width × thickness);
– grade.
EXAMPLE IEC 60317-16 – 4,00 x 1,00 Grade 1

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day