SIST EN 10245-3:2012

Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire

Complementary to EN 10245-1, this Part of EN 10245 specifies the characteristics and requirements for steel wire and wire products coated with polyethylene, (PE).

Stahldraht und Drahterzeugnisse - Organische Beschichtungen auf Draht - Teil 3: PE-beschichteter Draht

Ergänzend zu EN 10245-1 legt diese Europäische Norm Eigenschaften und Anforderungen für Stahldraht und Drahterzeugnisse fest, die mit Polyethylen (PE) beschichtet sind.

Fils et produits tréfilés en acier - Revêtements organiques sur fils d'acier - Partie 3: Fils à revêtement de PE

La présente partie de cette norme européenne, qui vient en complément de la norme EN 10245-1, spécifie les caractéristiques et les prescriptions relatives aux fils et produits tréfilés en acier à revêtement de polyéthylène (PE).

Jeklena žica in žični izdelki - Organske prevleke na jekleni žici - 3. del: Žica, prevlečena s PE

Ta evropski standard dopolnjuje EN 10245-1 in določa karakteristike in zahteve za jeklene žice in žične izdelke, prevlečene s polietilenom (PE).

General Information

• Status: Published
• Public Enquiry End Date: 30-Sep-2008
• Publication Date: 16-Nov-2011
• ICS: 25.220.60 - Organic coatings
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 16-Nov-2011
• Due Date: 21-Jan-2012
• Completion Date: 17-Nov-2011
• Ref Project: EN 10245-3:2011 - Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire

Relations

• Replaces: SIST EN 10245-3:2002 - Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
• Effective Date: 01-Jan-2012
• Replaces: SIST EN 10245-3:2002 - Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Drahterzeugnisse - Organische Beschichtungen auf Draht - Teil 3: PE-beschichteter DrahtFils et produits tréfilés en acier - Revêtements organiques sur fils d'acier - Partie 3: Fils à revêtement de PESteel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains25.220.60Organske prevlekeOrganic coatingsICS:Ta slovenski standard je istoveten z:EN 10245-3:2011SIST EN 10245-3:2012en,de01-januar-2012SIST EN 10245-3:2012SLOVENSKI
STANDARDSIST EN 10245-3:20021DGRPHãþD



SIST EN 10245-3:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10245-3
October 2011 ICS 25.220.60; 77.140.65 Supersedes EN 10245-3:2001English Version
Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire
Fils et produits tréfilés en acier - Revêtements organiques sur fils d'acier - Partie 3: Fils à revêtement de PE
Stahldraht und Drahterzeugnisse - Organische Beschichtungen auf Stahldraht - Teil 3: PE-beschichteter Draht This European Standard was approved by CEN on 17 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10245-3:2011: ESIST EN 10245-3:2012



EN 10245-3:2011 (E) 2 Contents Page Foreword .3Introduction .41 Scope .42 Normative references .53 Terms and definitions .54 Types of PE coating materials .55 Requirements and test methods for PE coating material .65.1 Requirements .65.1.1 The composition and method of application .65.1.2 PE organic coating material consistency .65.1.3 Density .65.1.4 Melt flow index .65.1.5 Tensile strength .65.1.6 Elongation .75.2 Test methods .75.2.1 General .75.2.2 Melt flow index .76 Requirements and test methods for PE coating on wire .76.1 Requirements .76.1.1 General .76.1.2 Appearance .76.1.3 Colour-gloss and thickness .76.1.4 Elongation .76.1.5 Concentricity .86.1.6 Adherence .86.2 Test method .86.2.1 Appearance .86.2.2 Colour .86.2.3 Gloss .86.2.4 Thickness .86.2.5 Concentricity .86.2.6 Tensile strength and elongation .86.2.7 Adherence (where required) .86.2.8 Resistance to artificial light exposure .87 Performance of PE coating materials as the coating on wire .87.1 Requirement for colour stability (accelerated weathering) .87.2 Test method for colour stability .98 Retests .99 Inspection and quality assurance .9Bibliography . 10 SIST EN 10245-3:2012



EN 10245-3:2011 (E) 3 Foreword This document (EN 10245-3:2011) has been prepared by Technical Committee ECISS/TC 106 “Wire rod and wires”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2012, and conflicting national standards shall be withdrawn at the latest by April 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 10245-3:2001. This standard is made up of the following parts:
 Part 1: General Rules;  Part 2: PVC finished wire;  Part 3: PE coated wire;  Part 4: Polyester coated wire;  Part 5: Polyamide coated wire. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 10245-3:2012



EN 10245-3:2011 (E) 4 Introduction This European Standard for organic coatings for steel wire covers the requirements of a general nature and applies also to coatings for which no specific requirements have been established in the subsequent parts of this standard. The subsequent parts of this standard deal more specifically with clearly defined coatings or groups of coatings. These coatings may have their own particular methods of application and their individual requirements which are specified in these parts of thi
...