SIST EN 16582-3:2015
(Main)Domestic swimming pools - Part 3: Specific requirements including safety and test methods for aboveground pools
Domestic swimming pools - Part 3: Specific requirements including safety and test methods for aboveground pools
This part of EN 16582 specifies the specific safety and quality requirements and test methods for domestic
aboveground swimming pools in addition to the general requirements of EN 16582-1 and shall be read in
conjunction with it. The requirements of this standard take priority over those in EN 16582-1.
These requirements and test methods are applicable to aboveground pool structures, including their means of
access.
This European Standard applies to pools with a minimum water depth of more than 400 mm.
This European Standard does not apply to:
— pools of public use covered by EN 15288-1;
— paddling pools according to EN 71-8;
— domestic or public use spas.
Schwimmbäder für private Nutzung - Teil 3: Spezielle Besondere Anforderungen einschließlich sicherheitstechnischer Anforderungen und Prüfverfahren für auf dem Boden aufgestellte Schwimmbäder
Dieser Teil von EN 16582 legt die speziellen sicherheitstechnischen und Qualitäts¬anforderungen sowie Prüfverfahren für auf dem Boden aufgestellte Schwimmbäder für private Nutzung zusätzlich zu den allgemeinen Anforderungen der EN 16582 1 fest und muss zusammen mit dieser gelesen werden. Die Anforderungen dieser speziellen Norm haben Vorrang vor denen in EN 16582 1.
Diese Anforderungen und Prüfverfahren gelten nur für auf dem Boden aufgestellte Schwimmbecken-konstruktion, einschließlich deren Zugangseinrichtungen.
Dieses Dokument gilt für Schwimmbäder mit einer minimalen Wassertiefe 400 mm.
Diese Norm gilt nicht für:
- Öffentliche genutzte Schwimmbäder, die in EN 15288 1 behandelt sind;
- Planschbecken nach EN 71 8;
- Warmsprudelbecken für private Nutzung.
Piscines privées à usage familial - Partie 3: Exigences spécifiques, exigences de sécurité et méthodes d'essai pour piscines hors sol
La présente partie de l'EN 16582-3 spécifie les exigences de sécurité et de qualité spécifiques ainsi que les méthodes d'essai pour les piscines privées hors sol, en plus des exigences générales de l'EN 16582-1 et doit être lue conjointement avec cette dernière. Les exigences de la présente norme spécifique sont prioritaires sur celles de l'EN 16582-1.
Ces exigences et méthodes d'essai sont applicables à la structure des piscines hors sol, ainsi qu'à leurs moyens d'accès.
Le présent document s'applique aux piscines présentant une hauteur d'eau minimale supérieure à 400 mm.
La présente norme ne s’applique pas :
- aux piscines à usage public couvertes par l'EN 15288-1 ;
- aux pataugettes selon l'EN 71-8 ;
- aux spas à usage familial privé.
Plavalni bazeni za domačo uporabo - 3. del: Posebne zahteve, vključno z varnostjo in preskusnimi metodami za bazene, postavljene na površini
Ta del standarda EN 16582 poleg splošnih zahtev standarda EN 16582-1 določa posebne varnostne in kakovostne zahteve ter preskusne metode za nadzemne plavalne bazene za domačo uporabo in se navezuje na navedeni standard. Zahteve tega standarda imajo prednost pred zahtevami standarda EN 16582-1. Te zahteve in preskusne metode se uporabljajo za nadzemne strukture plavalnih bazenov, vključno z načinom dostopa.
Ta evropski standard se uporablja za bazene z minimalno globino vode več kot 400 mm.
Ta evropski standard se ne uporablja za:
– javne plavalne bazene, obravnavane v standardu EN 15288-1;
– bazene za otroke v skladu s standardom EN 71-8;
– prostore za dobro počutje za domačo ali javno uporabo.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schwimmbäder für private Nutzung - Teil 3: Spezielle Besondere Anforderungen einschließlich sicherheitstechnischer Anforderungen und Prüfverfahren für auf dem Boden aufgestellte SchwimmbäderPiscines privées à usage familial - Partie 3: Exigences spécifiques, exigences de sécurité et méthodes d'essai pour piscines hors solDomestic swimming pools - Part 3: Specific requirements including safety and test methods for aboveground pools97.220.10Športni objektiSports facilitiesICS:Ta slovenski standard je istoveten z:EN 16582-3:2015SIST EN 16582-3:2015en,fr,de01-oktober-2015SIST EN 16582-3:2015SLOVENSKI
STANDARD
SIST EN 16582-3:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16582-3
August 2015 ICS 97.220.10 English Version
Domestic swimming pools - Part 3: Specific requirements including safety and test methods for aboveground pools
Piscines privées à usage familial - Partie 3 : Exigences spécifiques et de sécurité et méthodes d'essai pour piscines hors sol
Schwimmbäder für private Nutzung - Teil 3: Besondere Anforderungen einschließlich sicherheitstechnischer Anforderungen und Prüfverfahren für auf dem Boden aufgestellte Schwimmbäder This European Standard was approved by CEN on 20 June 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16582-3:2015 ESIST EN 16582-3:2015
EN 16582-3:2015 (E) 2 Contents Page European foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Requirements and test methods specific to aboveground swimming pools .8 4.1 General .8 4.2 Aboveground swimming pool with frame-supporting walls .8 4.2.1 Resistance to horizontal deformation .8 4.2.2 Resistance to vertical deformation .9 4.2.3 Bursting strength . 10 4.3 Aboveground swimming pool with self-stabilizing walls . 11 4.3.1 Capacity to stop an overflow . 11 4.3.2 Inflatable compartment . 12 4.3.3 Stability in the event of deflation of the upper tube . 12 4.3.4 Bursting strength . 12 4.4 Mechanical strength of the membrane of a swimming pool with tubular frame and/or flexible structure . 13 Bibliography . 14
SIST EN 16582-3:2015
EN 16582-3:2015 (E) 3 European foreword This document (EN 16582-3:2015) has been prepared by Technical Committee CEN/TC 402 “Domestic pools and spas”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2016 and conflicting national standards shall be withdrawn at the latest by February 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document is part of a series of standards dealing with domestic swimming pools which consist of: — Part 1: General requirements including safety and test methods; — Part 2: Specific requirements including safety and test methods for inground pools; — Part 3: Specific requirements including safety and test methods for aboveground pools. This European Standard has to be read in conjunction with local and national regulations if they exist. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16582-3:2015
EN 16582-3:2015 (E) 4 1 Scope This part of EN 16582 specifies the specific safety and quality requirements and test methods for domestic aboveground swimming pools in addition to the general requirements of EN 16582-1 and shall be read in conjunction with it. The requirements of this standard take priority over those in EN 16582-1. These requirements and test methods are applicable to aboveground pool structures, including their means of access. This European Standard applies to pools with a minimum water depth of more than 400 mm. This European Standard does not apply to: — pools of public use covered by EN 15288-1; — paddling pools according to EN 71-8; — domestic or public use spas. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1875-3, Rubber- or plastics- coated fabrics - Determination of tear strength - Part 3: Trapezoidal method EN 16582-1:2015, Domestic swimming pools - Part 1: General requirements including safety and test methods EN ISO 1421, Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421) EN ISO 2411, Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411) EN ISO 4674-2, Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 16582-1:2015 and the following apply. 3.1 frame all of the resistant parts that support and/or reinforce the wall in view of forming the peripheral structure
Note 1 to entry: See Figure 1. 3.2 pool wall generally upright structure serving to enclose or divide water or to protect an area SIST EN 16582-3:2015
EN 16582-3:2015 (E) 5 3.3 frame-supported wall wall whose stability is ensured solely by the constitutive elements supplied and which does not require additional reinforcement for its resistance to internal pressure (see Figure 1) Note 1 to entry: Foundation or ground-anchoring elements are not considered as reinforcements.
a) Case 1 Key 1 frame 2
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schwimmbäder für private Nutzung - Teil 3: Spezielle Besondere Anforderungen einschließlich sicherheitstechnischer Anforderungen und Prüfverfahren für auf dem Boden aufgestellte SchwimmbäderPiscines privées à usage familial - Partie 3: Exigences spécifiques, exigences de sécurité et méthodes d'essai pour piscines hors solDomestic swimming pools - Part 3: Specific requirements including safety and test methods for aboveground pools97.220.10Športni objektiSports facilitiesICS:Ta slovenski standard je istoveten z:FprEN 16582-3kSIST FprEN 16582-3:2015en,fr,de01-maj-2015kSIST FprEN 16582-3:2015SLOVENSKI
STANDARD
kSIST FprEN 16582-3:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 16582-3
March 2015 ICS 97.220.10 English Version
Domestic swimming pools - Part 3: Specific requirements including safety and test methods for aboveground pools
Piscines privées à usage familial - Partie 3 : Exigences spécifiques, exigences de sécurité et méthodes d'essai pour piscines hors sol
Schwimmbäder für private Nutzung - Teil 3: Besondere Anforderungen einschließlich sicherheitstechnischer Anforderungen und Prüfverfahren für auf dem Boden aufgestellte Schwimmbäder This draft European Standard is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC 402.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 16582-3:2015 EkSIST FprEN 16582-3:2015
FprEN 16582-3:2015 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Requirements and test methods specific to aboveground swimming pool .8 4.1 General .8 4.2 Aboveground swimming pool with frame-supporting walls .8 4.2.1 Resistance to horizontal deformation .8 4.2.2 Resistance to vertical deformation .9 4.2.3 Bursting strength . 10 4.3 Aboveground swimming pool with self-stabilising walls . 11 4.3.1 Capacity to stop an overflow . 11 4.3.2 Inflatable compartment . 12 4.3.3 Stability in the event of deflation of the upper tube . 12 4.3.4 Bursting strength . 12 4.4 Mechanical strength of the membrane of a swimming pool with tubular frame and/or flexible structure . 13 Bibliography . 14
kSIST FprEN 16582-3:2015
FprEN 16582-3:2015 (E) 3 Foreword This document (FprEN 16582-3:2015) has been prepared by Technical Committee CEN/TC 402 “Domestic pools and spas”, the secretariat of which is held by AFNOR. This document is currently submitted to the Formal Vote. This document is part of a series of standards dealing with domestic swimming pools which consist of: — Part 1: general requirements including safety and test methods; — Part 2: specific requirements including safety and test methods for inground pools; — Part 3: specific requirements including safety and test methods for aboveground pools. kSIST FprEN 16582-3:2015
FprEN 16582-3:2015 (E) 4 1 Scope This part of FprEN 16582 specifies the specific safety and quality requirements and test methods for domestic aboveground swimming pools in addition to the general requirements of FprEN 16582-1 and shall be read in conjunction with it. The requirements of this standard take priority over those in FprEN 16582-1. These requirements and test methods are applicable to aboveground pool structures, including their means of access. This European Standard applies to pools with a minimum water depth of more than 400 mm. This European Standard does not apply to: — pools of public use covered by EN 15288-1; — paddling pools according to EN 71-8; — domestic or public use spas. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1875-3, Rubber- or plastics- coated fabrics - Determination of tear strength - Part 3: Trapezoidal method EN 1990, Eurocode - Basis of structural design EN ISO 1421, Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421) EN ISO 2411, Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411) EN ISO 4674-2, Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2) 3 Terms and definitions For the purposes of this document, the terms and definitions given in FprEN 16582-1 and the following apply. 3.1 frame all of the resistant parts that support and/or reinforce the wall in view of forming the peripheral structure
Note 1 to entry: See Figure 1. 3.2 pool wall generally upright structure serving to enclose or divide water or to protect an area kSIST FprEN 16582-3:2015
FprEN 16582-3:2015 (E) 5 3.3 frame-supported wall wall whose stability is ensured solely by the constitutive elements supplied and which does not require additional reinforcement for its resistance to internal pressure (see Figure 1) Note 1 to entry: Foundation or ground-anchoring elements are not considered as reinforcements.
a) Case 1 Key 1 Frame 2 Structure 3 Waterproofing membrane
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.