iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 301 215-2 V1.3.1:2003

(Main)

Fixed Radio Systems; Point-to-Multipoint Antennas; Antennas for point-to-multipoint fixed radio systems in the 11 GHz to 60 GHz band; Part 2: 24 GHz to 30 GHz

Fixed Radio Systems; Point-to-Multipoint Antennas; Antennas for point-to-multipoint fixed radio systems in the 11 GHz to 60 GHz band; Part 2: 24 GHz to 30 GHz

Reduction of the Terminal Station minimum boresight gain in the gain category 1 from 26dBi to 22dBi.

Fiksni radijski sistemi – Antene tipa točka-več točk – Antene za fiksne radijske sisteme tipa točka-več točk, ki delujejo v frekvenčnem pasu od 11 GHz do 60 GHz – 2. del: Pas od 24 GHz do 30 GHz

General Information

Status
Published
Publication Date
30-Nov-2003
ICS
33.060.30 - Radio relay and fixed satellite communications systems
33.120.40 - Aerials
Technical Committee
SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003
Ref Project
ETSI EN 301 215-2 V1.3.1 (2002-06) - Fixed Radio Systems; Point-to-Multipoint Antennas; Antennas for point-to-multipoint fixed radio systems in the 11 GHz to 60 GHz band; Part 2: 24 GHz to 30 GHz

Buy Standard

EN 301 215-2 V1.3.1:2003EN 301 215-2 V1.3.1:2003
PreviousNext
Standard
EN 301 215-2 V1.3.1:2003
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fixed Radio Systems; Point-to-Multipoint Antennas; Antennas for point-to-multipoint fixed radio systems in the 11 GHz to 60 GHz band; Part 2: 24 GHz to 30 GHz33.120.40AnteneAerials33.060.30Radiorelejni in fiksni satelitski komunikacijski sistemiRadio relay and fixed satellite communications systemsICS:Ta slovenski standard je istoveten z:EN 301 215-2 Version 1.3.1SIST EN 301 215-2 V1.3.1:2003en01-december-2003SIST EN 301 215-2 V1.3.1:2003SLOVENSKI
STANDARD



SIST EN 301 215-2 V1.3.1:2003



ETSIEN301215-2V1.3.1(2002-06)EuropeanStandard(Telecommunicationsseries)FixedRadioSystems;Point-to-MultipointAntennas;Antennasforpoint-to-multipointfixedradiosystemsinthe11GHzto60GHzband;Part2:24GHzto30GHzSIST EN 301 215-2 V1.3.1:2003



ETSIETSIEN301215-2V1.3.1(2002-06)2ReferenceREN/TM-04145Keywordsantenna,DRRS,FWA,multipoint,radio,RLL,transmissionETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://portal.etsi.org/tb/status/status.aspIfyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2002.Allrightsreserved.DECTTM,PLUGTESTSTMandUMTSTMareTradeMarksofETSIregisteredforthebenefitofitsMembers.TIPHONTMandtheTIPHONlogoareTradeMarkscurrentlybeingregisteredbyETSIforthebenefitofitsMembers.3GPPTMisaTradeMarkofETSIregisteredforthebenefitofitsMembersandofthe3GPPOrganizationalPartners.SIST EN 301 215-2 V1.3.1:2003



ETSIETSIEN301215-2V1.3.1(2002-06)3ContentsIntellectualPropertyRights.4Foreword.41Scope.52References.53Definitions,symbolsandabbreviations.54Electricalcharacteristics.64.1Terminalstationantennas.64.1.1TSradiationpatternenvelope.64.1.2TSminimumantennaboresightgain.84.2Centralstationsectoredantennas.84.2.1CSazimuthradiationpatternenvelopes,sectored.84.2.2Minimumboresightgain,sectored.104.3Centralstationomni-directionalantennas.104.4CentralstationsectoredelevationRPEs.104.5Polarization,terminalstationandcentralstationantennas.114.6Radomes.11AnnexA(informative):Bibliography.12History.13SIST EN 301 215-2 V1.3.1:2003



ETSIETSIEN301215-2V1.3.1(2002-06)4IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://webapp.etsi.org/IPR/home.asp).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeTransmissionandMultiplexing(TM).Thepresentdocumentispart2ofamulti-partdeliverablecoveringrequirementsforantennasinconjunctionwithmultipoint(MP)systemsnecessarytofacilitatefrequencyco-ordinationbetweenservicesinthefrequencybands11GHzto60GHz,asidentifiedbelow:Part1:"Generalaspects";Part2:"24GHzto30GHz";Part3:"MultipointMultimediaWirelesssystemin40,5GHzto43,5GHz";Part4:"MultipointMultimediaWirelesssystemin30GHzto40,5GHz".Thepresentdocumentisorganizedinthefollowingway.Part1givesgeneralinformationaboutthescope,normativereferences,definitions,classification,normativeandinformativeelectricalandmechanicalcharacteristics.Part1istheframeworkforfurtherparts,wheredistinctvaluesofnormativecharacteristicsforagivenfrequencysub-bandaredefined.Consequently,part1incombinationwithanotherpartformstheENforagivensub-band.NationaltranspositiondatesDateofadoptionofthisEN:31May2002DateoflatestannouncementofthisEN(doa):31August2002DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):28February2003DateofwithdrawalofanyconflictingNationalStandard(dow):28February2003SIST EN 301 215-2 V1.3.1:2003



ETSIETSIEN301215-2V1.3.1(2002-06)51ScopeThepresentdocumentspecifiestheessentialelectricalrequirementsforlinearpolarization,fixedbeamantennastobeutilizedwithnewPoint-to-Multipoint(P-MP)systemsEN301213-1[1],includingcentralstationandterminalstationapplications,operatinginfrequencybandsfrom11GHzto60GHz.Thesesystemsusevariousmultipleaccessschemes.Electronicallysteerableantennas,andcircularlypolarizedantennasarenotconsideredinthepresentdocument.The
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 302 326-2 V1.1.1:2006(Main)
Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment
ETSI EN 302 326-2 V1.1.1 (2005-12)

The present document is intended to cover the provisions of the R&TTE Directive [2] regarding article 3.2, which states that "[...] radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
The present document is applicable to the essential requirements of equipment (including equipment with integral antennas) used in Multipoint (MP) Digital Fixed Radio Systems (DFRS). The present document, together with EN 302 326-3 [12] are intended to replace and supersede, after a suitable transition period, the harmonized EN 301 753 (see bibliography) for all multipoint equipment and antennas. The present document and EN 302 326-3 [12] introduce rationalization among systems conforming to previous EN 301 753 (see bibliography) referencing a number of ENs which, being developed at different times, might have specified slightly different requirements. However, care has been taken so that such variations will not affect any frequency planning assumption for already deployed networks. Therefore, unless specifically mentioned, these new requirements, whenever different from those single ENs, are considered completely "equivalent". Therefore mixed use of equipment conforming to the present document and to those previous one will not change, in practice, any frequency planning rule in any network.
Therefore, from a strictly technical point of view, in most cases it is expected that equipment already conforming to the previous versions of Harmonized EN 301 753 (see bibliography), would not need re-assessment of essential requirements according to the present document. The legal implications of the declaration of conformity and equipment labelling are, however, outside the scope of this whole multi-part deliverable. Cases, where additional conformance assessment is anyhow required, will be specifically mentioned in the present document and also EN 302 326-3 [12].
In addition to the present document, other ENs specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [2] and which will apply to equipment within the scope of the present document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.
In order to (technically) cover different market and network requirements, with an appropriate balance of performance to cost and effective and appropriate use of the radio spectrum, the present document, together with EN 302 326-3 [12], offers a number of system types and antennas alternatives, for selection by administrations, operators and manufacturers dependent on the desired use of the radio spectrum and network/market requirements; those options include:
• channel separation alternatives (as provided by the relevant CEPT Recommendation);
• spectral efficiency class alternatives (different modulation formats provided in radio equipment standards);
• antenna sectorization alternatives and directivity classes for CS;
• antenna directivity class alternatives for TS and/or RS;
• antenna basic polarization (linear or circular).
The applicability of this whole multi-part deliverable to MP equipment is governed by the definition of a number of system profiles that define the set of consistent requirements as described in EN 302 326-1 [11] to which equipment shall conform.
The present document is considered applicable to fixed radio systems products with integral antennas, for which all the technical requirements included in the present document and in EN 302 326-3 [12] apply, and to separate equipment products, to which only the relevant technical requirements apply, and which might therefore be subject to separate declarations of conformity with respect to the essential requirements of the R&TTE Directive [2].

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302 326-3 V1.1.1:2006(Main)
Fixed Radio Systems; Multipoint Equipment and Antennas; Part 3: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Multipoint Radio Antennas
ETSI EN 302 326-3 V1.1.1 (2005-12)

The present document is intended to cover the provisions of the R&TTE Directive [1] regarding article 3.2, which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
The present document is applicable to the essential requirements of antennas (including equipment with integral antennas) used in fixed multipoint radio systems The present document together with EN 302 326-2 [7], is intended to replace and supersede, after a suitable transition period, the harmonized EN 301 753 (see bibliography). for all multipoint equipment and antennas under its scope.
The present document and EN 302 326-2 [7] introduce rationalization among systems conforming to previous EN 301 753 (see bibliography) referencing a number of ENs which, being developed at different times, may have specified slightly different antenna parameters. Nevertheless, care has been taken so that such variations will not affect any frequency planning assumption for already deployed networks. Therefore, unless specifically mentioned, these new requirements, whenever different from those single ENs, are considered completely "equivalent". Therefore mixed use of antennas conforming to the present document and to those previous ones will not change, in practice, any frequency planning rule in any network.
Therefore, from a strictly technical point of view, in most cases it is expected that equipment already conforming to the previous versions of Harmonized EN 301 753 (see bibliography), would not need re-assessment of essential requirements according to the present document. The legal implications of the declaration of conformity and equipment labelling are, however, outside the scope of this whole multi-part deliverable. Cases, where additional conformance
assessment is required, will be specifically mentioned in EN 302 326-2 [7] and in the present document. A formal change in the requirements, introduced by the present document, is that the antenna manufacturer shall declare the nominal gain and tolerance of the antenna against which the conformity assessment is done. In addition to the present document, other ENs specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] and which will apply to antennas within the scope of the present document.
NOTE: A list of such ENs is included on the web site: http://www.newapproach.org.
In order to (technically) cover different market and network requirements, with an appropriate balance of performance to cost and effective and appropriate use of the radio spectrum, the present document, together with EN 302 326-2 [7], offers a number of system types and antennas alternatives, for selection by administrations, operators and manufacturers dependent on the desired use of the radio spectrum and network/market requirements; those options include:
• channel separation alternatives (as provided by the relevant CEPT Recommendation);
• spectral efficiency class alternatives (different modulation formats provided in radio equipment standards);
• antenna sectorization alternatives and directivity classes for CS;
• antenna directivity class alternatives for TS and/or RS;
• antenna basic polarization (linear or circular).
For Digital Fixed Radio Systems (DFRS), antennas are considered "relevant components" of "radio equipment" according the definition in article 2(c) of the R&TTE Directive [1]. In particular, it has to be noted that TCAM, while recognizing the "essentiality" of antenna directional requirements for some applications, including the Fixed Service, has deliberated that there should be no obligation for separate declaration of conformity for stand alone antennas and that the conformity to the relevant essential requirements should be the responsibility of the final system integrator.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302 217-1 V1.1.4:2006(Main)
Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 1: Overview and system-independent common characteristics
ETSI EN 302 217-1 V1.1.4 (2005-11)

Through the notification of the UK interface regulation, the European Commission have strongly requested that ETSI TM4 consider a rationalisation of the number of fixed terrestrial (point-to-point) standards. This work item is therefore in response to this request and aims to simplify (and rationalise the number of)  existing standards.   This work item is to appraise only the published ETSI fixed terrestrial (point-to-point) radio relay standards and consolidate these into the new style generic format . The primary intention will be to rationalise the existing number of standards, in excess of 30, to just a handful, e.g. ideally 5. These standards will then be proposed as Harmonised Standards.  The preferred method of segmentation is yet to be decided, but this may be on the basis of  (frequency range or application or traffic capacity).  Annex A illustrates possible segmentation options.  The work will only consolidate new or existing work items on standards if the output deliverables are formally published before the completion of this work activity. Further, this work item does not, in principle, propose to change any existing technical parameter values, although the presentation of data/information may be modified to enhance understanding and usability leading to some new or revised requirements. The format shall be consistent across the range of standards which are segmented under the preferred method.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302 217-4-1 V1.1.3:2006(Main)
Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 4-1: System-dependent requirements for antennas
ETSI EN 302 217-4-1 V1.1.3 (2004-12)

The present document summarizes all requirements for single main beam, linear polarization, directional antennas to be adopted in conjunction with Point-to-Point (PP) systems operating in the frequency range 1 GHz to 60 GHz. Single polarization antennas, dual polarization antennas, dual band/single polarized antennas and dual band/dual polarization antennas are considered. Description and limits for parameters relevant to essential requirements under article 3.2 of the R&TTE Directive [1] are given in EN 302 217-4-2 [4].
For other parameters and general information that does not affect the R&TTE Directive [1] "essential requirements" mentioned above, description and limits are set out in the present document. There are a number of different antenna types for various applications, the principles by which they are classified are given in clause 5. The present document does not cover aspects related to test procedures and test conditions, which are covered by the scope of EN 301 126-3-1 [2]. Guidance on the definition of radio parameters relevant to the essential requirements under article 3.2 of the R&TTE Directive [1] for DFRS may be found in TR 101 506 (see bibliography).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302 085 V1.2.3:2006(Main)
Fixed Radio Systems; Point-to-Multipoint Antennas; Antennas for point-to-multipoint fixed radio systems in the 3 GHz to 11 GHz band
ETSI EN 302 085 V1.2.3 (2005-09)

The present document specifies the essential electrical requirements for linear polarization, fixed beam antennas to be utilized with new Point-to-Multipoint (P-MP) systems, including central station and terminal station applications, operating in frequency bands from 3 GHz to 11 GHz. These systems use various multiple access schemes. Electronically steerable antennas and circularly polarized antennas are not considered in the present document. Only in exceptional circumstances, and after a consultation period with operators and manufacturers, the Regulatory Authority may impose the use of tighter requirements than the minimum values given in the present document, in order to maximize the use of scarce spectrum resources. For some high gain, point-to-multipoint requirements, antennas may be used having performance as per the appropriate point-to-point antenna standard. For these antennas, minimum requirements are given in EN 300 833 [8].

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302 217-1 V1.1.3:2006(Main)
Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 1: Overview and system-independent common characteristics
ETSI EN 302 217-1 V1.1.3 (2004-12)

The present document applies to the following digital fixed radio systems (DFRS), including equipment with integral antenna, and antenna types:
• point-to-point systems intended for operation in frequency bands that require co-ordination;
• point-to-point systems intended for operation in frequency bands that do not require co-ordination;
• antennas for point-to-point operation.
The present document summarizes all characteristics, principles and definitions that are common to all P-P equipment and antennas, EN 302 217- 2-1 and EN 302 217-4-1 (see bibliography) summarize the other system dependent characteristics and include limits for "non-essential" requirements, EN 302 217-2-2, EN 302 217-3 and EN 302 217-4-2 (see bibliography) contain the whole description and limits of "essential" requirements under article 3.2 of the R&TTE Directive [1]. Health and safety requirements, relevant to article 3.1a of the R&TTE Directive [1] are not considered in any part of this EN 302 217 series. EMC conditions and requirements, relevant to article 3.1b of the R&TTE Directive [1] and any other essential requirement relevant to article 3.3 of the R&TTE Directive [1] are not in the scope of any part of this EN 302 217 series.
However, for reader information, EG 201 752 (see bibliography) gives guidance in the selection of other ETSI and CENELEC standards for the assessment of essential requirements under article 3.1 of the R&TTE Directive [1] for any Fixed Radio System.
NOTE: A list of such ENs is available on the web site http://www.newapproach.org.
For administration's guidance when notifying their regulated interfaces in accordance with article 4.1 of the R&TTE Directive [1], annex B provides explanatory considerations on the applicability of the TCAM-RIG format for P-P fixed links. An example of such a notification is also provided. Annex B has been elaborated in co-ordination with the CEPT ECC WG SE.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 302 217-2-1 V1.1.3:2006(Main)
Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2-1: System-dependent requirements for digital systems operating in frequency bands where frequency co-ordination is applied
ETSI EN 302 217-2-1 V1.1.3 (2004-12)

The present document summarizes all system-dependent requirements for Point-to-Point (P-P) equipment in applications deployed in bands where frequency co-ordination is generally applied. These requirements are introduced in two different clauses sub-sets:
• Main requirements are requirements that are also related to the "essential requirements" under article 3.2 of the R&TTE Directive [1] and further detailed in EN 302 217-2-2 [16].
• Complementary requirements are requirements that are not related to essential requirements under article 3.2 of the R&TTE Directive [1]. Nevertheless they are considered having been commonly agreed for proper system operation and deployment when specific deployment conditions or compatibility requirements are present. Compliance to all or some of these requirements is made on a voluntary basis. Description and limits for parameters relevant to essential requirements under article 3.2 of R&TTE Directive [1] are given in EN 302 217-2-2 [16].
For other system-dependent parameters where standardization is required but that do not affect the R&TTE Directive "essential requirements" mentioned above, description and limits are detailed in the present document in the annexes A to G, subdivided by frequency band or specific applications. The present document deals with Radio Frequency (RF) and base-band equipment characteristics; antenna system requirements are covered in EN 302 217-4-1 (see bibliography) and EN 302 217-4-2 (see bibliography). The present document does not cover test procedures and test conditions which are set out in EN 301 126-1 [14]. As the maximum transmission rate in a given bandwidth depends on system spectral efficiency, different equipment classes are defined:
• Class 1: equipment spectral efficiency based on typical 2-states modulation scheme (e.g. 2-FSK, 2-PSK or equivalent);
• Class 2: equipment spectral efficiency based on typical 4-states modulation scheme (e.g. 4-FSK, 4-QAM, or equivalent);
• Class 3: equipment spectral efficiency based on typical 8-states modulation scheme (e.g. 8-PSK, or equivalent);
NOTE: It is also noted that, in this class, for design commonality with other efficiency classes, the 16 QAM format is popular).
• Class 4: equipment spectral efficiency based on typical 16-states or 32-states modulation scheme (e.g. 16-QAM or 32-QAM, or equivalent);
• Class 5A: equipment spectral efficiency based on typical 64-states or 128-states modulation scheme (e.g. 64-QAM or 128-QAM, or equivalent), for cross-polar adjacent channel (ACAP) operation;
• Class 5B: equipment spectral efficiency based on typical 64-states or 128-states modulation scheme (e.g. 64-QAM or 128-QAM, or equivalent), for co-polar adjacent channel (ACCP) and frequency reuse through CCDP operation;
• Class 6A: equipment spectral efficiency based on typical 256-states or 512-states modulation scheme (e.g. 256-QAM or 512-QAM, or equivalent), for cross-polar adjacent channel (ACAP) operation;
• Class 6B: equipment spectral efficiency based on typical 256-states or 512-states modulation scheme (e.g. 256-QAM or 512-QAM, or equivalent), for co-polar adjacent channel (ACCP) and frequency reuse through CCDP operation.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 215-4 V1.1.1:2003(Main)
Fixed Radio Systems; Point-to-Multipoint Antennas; Antennas for multipoint fixed radio systems in the 11 GHz to 60 GHz band; Part 4: 30 GHz to 40,5 GHz
ETSI EN 301 215-4 V1.1.1 (2003-12)

To study and to specify the additional requirements for antennas for MP applications, operating in the frequency band 30 to 40.5 GHz.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 833 V1.2.1:2003(Main)
Fixed Radio Systems; Point-to-point Antennas; Antennas for point-to-point fixed radio systems operating in the frequency band 3 GHz to 60 GHz
ETSI EN 300 833 V1.2.1 (2000-08)

Clarification of antenna XPD categories.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 126-3-1 V1.1.1:2003(Main)
Fixed Radio Systems; Conformance testing; Part 3-1: Point-to-Point antennas; Definitions, general requirements and test procedures
ETSI EN 301 126-3-1 V1.1.1 (2000-04)

The parameters to be tested and the appropriate test methods for Point-to-Point Antennas (Definitions, general requirements and test procedures).  Purpose: To ensure conformance of equipment to the relevant TM4 standards.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day