oSIST prEN IEC 63171-1:2025

Connectors for electrical and electronic equipment - Part 1: Detail specification for 2-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 (copper LC style)

This part of IEC 63171 covers two-way, shielded or unshielded, free and fixed connectors known as Type 1, for balanced single-pair data transmission with frequencies up to 600 MHz and with current carrying capacity up to 2,0 A at 60 °C.
It specifies the common dimensions, and provides the mechanical, electrical, signal integrity, and environmental characteristics, the reliability specifications and corresponding tests for these connectors

Steckverbinder für elektrische und elektronische Einrichtungen - Teil 1: Bauartspezifikation für geschirmte oder ungeschirmte freie und feste Steckverbinder, 2-polig - Mechanische Steckinformationen, Pinbelegung und zusätzliche Anforderungen für Typ 1 (Kupfer LC Bauform)

Connecteurs pour équipements électriques et électroniques - Partie 1 : Spécification particulière pour fiches et embases écrantées ou non écrantées à 2 pôles - Informations d’accouplement mécanique, affectation des broches et exigences supplémentaires pour le type 1 (modèle LC en cuivre)

Konektorji za električno in elektronsko opremo - 1. del: Podrobne specifikacije za dvopolne, zaslonjene ali nezaslonjene, proste ali pritrjene konektorje - Informacije o mehanskih prilagoditvah, funkcije polov in dodatne zahteve za tip 1 (baker, vrsta LC)

General Information

• Status: Not Published
• Public Enquiry End Date: 31-Dec-2025
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 16-Oct-2025
• Due Date: 05-Mar-2026
• Ref Project: prEN IEC 63171-1:2025 - Connectors for electrical and electronic equipment - Part 1: Detail specification for 2-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 (copper LC style)

Relations

• Revises: SIST EN IEC 63171-1:2020 - Connectors for electrical and electronic equipment - Part 1: Detail specification for two-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 copper LC style (IEC 63171-1:2020)
• Effective Date: 16-Sep-2025

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2025
Konektorji za električno in elektronsko opremo - 1. del: Podrobne specifikacije za
dvopolne, zaslonjene ali nezaslonjene, proste ali pritrjene konektorje - Informacije
o mehanskih prilagoditvah, funkcije polov in dodatne zahteve za tip 1 (baker, vrsta
LC)
Connectors for electrical and electronic equipment - Part 1: Detail specification for 2-way,
shielded or unshielded, free and fixed connectors - Mechanical mating information, pin
assignment and additional requirements for Type 1 (copper LC style)
Steckverbinder für elektrische und elektronische Einrichtungen - Teil 1:
Bauartspezifikation für geschirmte oder ungeschirmte freie und feste Steckverbinder, 2-
polig - Mechanische Steckinformationen, Pinbelegung und zusätzliche Anforderungen für
Typ 1 (Kupfer LC Bauform)
Connecteurs pour équipements électriques et électroniques - Partie 1 : Spécification
particulière pour fiches et embases écrantées ou non écrantées à 2 pôles - Informations
d’accouplement mécanique, affectation des broches et exigences supplémentaires pour
le type 1 (modèle LC en cuivre)
Ta slovenski standard je istoveten z: prEN IEC 63171-1:2025
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
prEN IEC 63171-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2025
ICS 31.220.10 Will supersede EN IEC 63171-1:2020
English Version
Connectors for electrical and electronic equipment - Part 1:
Detail specification for 2-way, shielded or unshielded, free and
fixed connectors - Mechanical mating information, pin
assignment and additional requirements for Type 1 (copper LC
style)
(IEC 63171-1:2024)
Connecteurs pour équipements électriques et électroniques Steckverbinder für elektrische und elektronische
- Partie 1 : Spécification particulière pour fiches et embases Einrichtungen - Teil 1: Bauartspezifikation für geschirmte
écrantées ou non écrantées à 2 pôles - Informations oder ungeschirmte freie und feste Steckverbinder, 2-polig -
d'accouplement mécanique, affectation des broches et Mechanische Steckinformationen, Pinbelegung und
exigences supplémentaires pour le type 1 (modèle LC en zusätzliche Anforderungen für Typ 1 (Kupfer LC Bauform)
cuivre) (IEC 63171-1:2024)
(IEC 63171-1:2024)
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2026-01-02.

The text of this draft consists of the text of IEC 63171-1:2024.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 81878 Ref. No. prEN IEC 63171-1:2025 E

European foreword
This document (prEN IEC 63171-1:2025) consists of the text of document IEC 63171-1:2024, prepared
by IEC/SC 48B “Electrical connectors” of IEC/TC 48 "Electrical connectors and mechanical structures
for electrical and electronic equipment ".
This document is currently submitted to the Enquiry.
The following dates are proposed:
• latest date by which the existence of this document (doa) dav + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) dav + 36 months
conflicting with this document have to be withdrawn (to be confirmed or
modified when voting)
This document will supersede EN IEC 63171-1:2020 and all of its amendments and corrigenda (if any).
Annex ZA
(normative)
Normative references to international publications with their
corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-581 2008 International Electrotechnical Vocabulary - - -
Part 581: Electromechanical components for
electronic equipment
IEC 60068-1 2013 Environmental testing - Part 1: General and EN 60068-1 2014
guidance
IEC 60512-1 2018 Connectors for electrical and electronic EN IEC 60512-1 2018
equipment - Tests and measurements - Part
1: Generic specification
IEC 61754-20 2012 Fibre optic interconnecting devices and EN 61754-20 2012
passive components - Fibre optic connector
interfaces - Part 20: Type LC connector family
+ AMD1 2022 + A1 2022
IEC 63171 2021 Connectors for electrical and electronic EN IEC 63171 2021
equipment - Shielded or unshielded free and
fixed connectors for balanced single-pair data
transmission with current-carrying capacity -
General requirements and tests
ISO/IEC 11801-1 2017 Information technology - Generic cabling for - -
customer premises - Part 1: General
requirements
IEC 63171-1 ®
Edition 2.0 2024-04
INTERNATIONAL
STANDARD
Connectors for electrical and electronic equipment –

Part 1: Detail specification for 2-way, shielded or unshielded, free and fixed

connectors – Mechanical mating information, pin assignment and additional

requirements for Type 1 (copper LC style)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.220.10  ISBN 978-2-8322-8217-5

– 2 – IEC 63171-1:2024 © IEC 2024
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 9
4 Common features and typical connector pair . 10
4.1 Mating information . 10
4.1.1 General . 10
4.1.2 Interoperability . 10
4.1.3 Contacts – Mating conditions . 11
4.1.4 Fixed connector . 11
4.1.5 Free connector . 15
5 Characteristics . 16
5.1 General . 16
5.2 Pin assignment . 16
5.3 Classification into climatic category . 16
5.4 Electrical characteristics . 17
5.4.1 Creepage and clearance distances . 17
5.4.2 Voltage proof . 17
5.4.3 Current-temperature derating . 17
5.4.4 Initial contact resistance – interface only . 17
5.4.5 Input to output DC resistance . 17
5.4.6 Input to output DC resistance unbalanced. 17
5.4.7 Initial insulation resistance . 17
5.5 Transmission characteristics . 17
5.5.1 General . 17
5.5.2 Insertion loss (IL) . 17
5.5.3 Return loss (RL) . 18
5.5.4 Propagation delay . 18
5.5.5 Transverse conversion loss (TCL) . 18
5.5.6 Transverse conversion transfer loss (TCTL) . 18
5.5.7 Transfer impedance (shielded only) . 18
5.5.8 Coupling attenuation . 18
5.5.9 Power sum alien (exogenous) NEXT . 18
5.5.10 Power sum alien (exogenous) FEXT . 18
5.6 Mechanical characteristics . 18
5.6.1 Mechanical operation . 18
5.6.2 Effectiveness of connector coupling devices . 18
5.6.3 Insertion and withdrawal forces . 18
5.6.4 Polarizing method . 18
5.6.5 Dynamic stress . 18
6 Tests and test schedule . 19
6.1 General . 19
6.2 Example of arrangement for input to output contact resistance measurement . 19
6.3 Example of arrangement for contact resistance measurement . 19
6.4 Arrangement for vibration test (test phase DP) . 19

IEC 63171-1:2024 © IEC 2024 – 3 –
6.5 Test procedures and measuring methods . 19
6.6 Preconditioning . 20
6.7 Test schedules . 20
6.7.1 General . 20
6.7.2 Basic (minimum) test schedule . 20
6.7.3 Full test schedule . 20
Bibliography . 21

Figure 1 – Relationships between the IEC 63171 series and its related references . 7
Figure 2 – Connector overview . 8
Figure 3 – Mated fixed and free Type 1 connectors . 11
Figure 4 – Fixed Type 1 connector . 12
Figure 5 – Fixed Type 1 connector pin detail (detail A from Figure 4c) section D-D) . 14
Figure 6 – Free Type 1 connector . 15
Figure 7 – Arrangement for vibration test . 19

Table 1 – Dimensions for Figure 4a), Figure 4b) and Figure 4c) . 13
Table 2 – Dimensions for Figure 5 . 14
Table 3 – Dimensions for Figure 6a) and Figure 6b) . 16
Table 4 – Creepage and clearance distances . 17

– 4 – IEC 63171-1:2024 © IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT –

Part 1: Detail specification for 2-way, shielded or unshielded, free and
fixed connectors – Mechanical mating information, pin assignment and
additional requirements for Type 1 (copper LC style)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that th
...