SIST EN ISO 11431:2004

Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass (ISO 11431:2002)

ISO 11431:2002 specifies a method for the determination of the adhesion/cohesion properties of sealants after cyclic exposure to heat and artificial light followed by a period of exposure to water at a defined temperature.

Hochbau - Fugendichtstoffe - Bestimmung des Haft- und Dehnverhaltens von Dichtstoffen nach Einwirkung von Wärme, Wasser und künstlichem Licht durch Glas (ISO/FDIS 11431:2002)

Diese Internationale Norm legt ein Verfahren zur Bestimmung des Haft- und Dehnverhaltens von Dichtstoffen nach zyklischer Einwirkung von Wärme und künstlichem Licht gefolgt von einer Periode des Einwirkens von Wasser bei festgelegten Temperaturen fest.
ANMERKUNG   Die zyklische Einwirkung von Wasser, Strahlung und Wärme auf die Probekörper soll die Einwirkung der Bedingungen simulieren, denen Dichtstoffe beim Einsatz unter natürlicher Bewitterung ausgesetzt sind. Der im Vergleich mit den realen Bedingungen gegebene Beschleunigungsfaktor ist unbekannt. Es ist nicht beabsichtigt, Daten für die Dauerhaftigkeit der zu beurteilenden Dichtstoffe zu geben, sondern vielmehr eine Mindestleistungsfähigkeit für die Anwendung beim Verglasen sicherzustellen.

Construction immobiliere - Produits pour joints - Détermination des propriétés d'adhésivité/cohésion des mastics aprés exposition a la chaleur, a l'eau et a la lumiere artificielle a travers le verre (ISO 11431:2002)

L'ISO 11431:2002 prescrit une méthode de détermination des propriétés d'adhésivité/cohésion des mastics soumis à un certain nombre de cycles d'exposition à la chaleur et à la lumière artificielle, suivis d'une exposition à l'eau à une température élevée.

Gradnja objektov - Sredstva za stikovanje - Ugotavljanje adhezijskih/kohezijskih lastnosti tesnilnih mas po izpostavljenosti vročini, vodi in umetni svetlobi skozi steklo (ISO 11431:2002)

General Information

• Status: Published
• Publication Date: 31-Mar-2004
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: ISS SPL.GPO - Building construction
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Apr-2004
• Due Date: 01-Apr-2004
• Completion Date: 01-Apr-2004
• Ref Project: EN ISO 11431:2002 - Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass (ISO 11431:2002)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11431:2004
01-april-2004
*UDGQMDREMHNWRY6UHGVWYD]DVWLNRYDQMH8JRWDYOMDQMHDGKH]LMVNLKNRKH]LMVNLK
ODVWQRVWLWHVQLOQLKPDVSRL]SRVWDYOMHQRVWLYURþLQLYRGLLQXPHWQLVYHWORELVNR]L
VWHNOR,62
Building construction - Jointing products - Determination of adhesion/cohesion properties
of sealants after exposure to heat, water and artificial light through glass (ISO
11431:2002)
Hochbau - Fugendichtstoffe - Bestimmung des Haft- und Dehnverhaltens von
Dichtstoffen nach Einwirkung von Wärme, Wasser und künstlichem Licht durch Glas
(ISO/FDIS 11431:2002)
Construction immobiliere - Produits pour joints - Détermination des propriétés
d'adhésivité/cohésion des mastics aprés exposition a la chaleur, a l'eau et a la lumiere
artificielle a travers le verre (ISO 11431:2002)
Ta slovenski standard je istoveten z: EN ISO 11431:2002
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN ISO 11431:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11431:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 11431:2004
EUROPEAN STANDARD
EN ISO 11431
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2002
ICS 91.100.50
English version
Building construction - Jointing products - Determination of
adhesion/cohesion properties of sealants after exposure to heat,
water and artificial light through glass (ISO 11431:2002)
Construction immobilière - Produits pour joints - Hochbau - Fugendichtstoffe - Bestimmung des Haft- und
Détermination des propriétés d'adhésivité/cohésion des Dehnverhaltens von Dichtstoffen nach Einwirkung von
mastics aprés exposition à la chaleur, à l'eau et à la Wärme, Wasser und künstlichem Licht durch Glas (ISO
lumière artificielle à travers le verre (ISO 11431:2002) 11431:2002)
This European Standard was approved by CEN on 11 July 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11431:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11431:2004
EN ISO 11431:2002 (E)
CORRECTED  2002-10-02
Foreword
This document (EN ISO 11431:2002) has been prepared by Technical Committee ISO /TC 59
"Building construction" in collaboration with CMC.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by February 2003, and conflicting national
standards shall be withdrawn at the latest by February 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the
United Kingdom.
Endorsement notice
The text of ISO 11431:2002 has been approved by CEN as EN ISO 11431:2002 without any
modifications.
NOTE  Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 11431:2004
EN ISO 11431:2002 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications,
indicated by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 4892-1 1999 Plastics - Methods of exposure to EN ISO 4892-1 2000
laboratory light sources - Part 1:
General guidance
ISO 4892-2 1994 Plastics - Methods of exposure to EN ISO 4892-2 1999
laboratory light sources - Part 2:
Xenon-arc sources
ISO 6927 1981 Building construction - Jointing EN 26927 1990
products - Sealants - Vocabulary
3

---------------------- Page: 5 ----------------------

SIST EN ISO 11431:2004

---------------------- Page: 6 ----------------------

SIST EN ISO 11431:2004
INTERNATIONAL ISO
STANDARD 11431
Second edition
2002-08-15
Building construction — Jointing
products — Determination of
adhesion/cohesion properties of sealants
after exposure to heat, water and artificial
light through glass
Construction immobilière — Produits pour joints — Détermination des
propriétés d'adhésivité/cohésion des mastics après exposition à la chaleur,
à l'eau et à la lumière artificielle à travers le verre

Reference number
ISO 11431:2002(E)
© ISO 2002

---------------------- Page: 7 ----------------------

SIST EN ISO 11431:2004
ISO 11431:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
©
ii ISO 2002 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 11431:2004
ISO 11431:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO11431 was prepared by Technical Committee ISO/TC59, Building construction,
Subcommittee SC 8, Jointing products.
This second edition cancels and replaces the first edition (ISO 11431:1993), which has been technically revised.
©
ISO 2002 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 11431:2004

---------------------- Page: 10 ----------------------

SIST EN ISO 11431:2004
INTERNATIONAL STANDARD ISO 11431:2002(E)
Building construction — Jointing products — Determination of
adhesion/cohesion properties of sealants after exposure to heat,
water and artificial light through glass
1 Scope
This International Standard specifies a method for the determination of the adhesion/cohesion properties of sealants
after cyclic exposure to heat and artificial light followed by a period of exposure to water at a defined temperature.
NOTE The cyclic exposure of the test specimens to water and to radiation and heat is meant to simulate the exposure of sealants
in service to natural weather conditions. The acceleration factor in comparison with the real situation is unknown. The intention is
not to receive durability data for the sealants under evaluation but to ensure a minimum performance in glazing applications.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of
this International Standard. For dated references, subsequent amendments to, or revisions of, any of these
publications do not apply. However, parties to agreements based on this International Standard are encouraged to
investigate the possibility of applying the most recent editions of the normative documents indicated below. For
undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC
maintain registers of currently valid International Standards.
ISO 4892-1:1999, Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
ISO 4892-2, Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc sources
ISO 6927, Building construction — Jointing products — Sealants — Vocabulary
ISO 13640, Building construction — Jointing products — Specifications for test substrates
CIE Publication No. 85:1989, Techn
...