SIST EN 14498:2004

Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles

This European Standard describes a test method to determine the volume and weight changes of injection products used for swelling fitted filling of cracks, voids and interstices after air drying and water storage cycles.

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Änderungen von Volumen und Gewicht nach Wechsel-Beanspruchung durch Trocknung an der Luft und Lagerung in Wasser

Diese Europäische Norm beschreibt ein Prüfverfahren zur Bestimmung der Änderungen von Volumen und Gewicht nach Wechsel-Beanspruchung durch Trocknung an der Luft und Lagerung in Wasser von Rissfüll-stoffen, die zum quellfähigen Füllen von Rissen, Hohlräumen und Fugen eingesetzt werden.

Produits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Changements de volume et de poids des produits d'injection par des cycles de séchage a l'air et de conditionnement dans l'eau

Le présent document décrit une méthode d'essai pour déterminer les changements de volume et de poids des produits d'injection aptes a gonfler, utilisés pour le remplissage des fissures, des vides et des interstices, apres des cycles de séchage a l'air et de conditionnement dans l'eau.

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Preskusne metode – Prostorninske in masne spremembe injekcijske mase po cikličnem sušenju na zraku in namakanju v vodi

General Information

• Status: Published
• Publication Date: 30-Nov-2004
• ICS: 91.080.40 - Concrete structures
• Technical Committee: BBB - Concrete, reinforced concrete and prestressed concrete
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2004
• Due Date: 01-Dec-2004
• Completion Date: 01-Dec-2004
• Mandate: M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
• Ref Project: EN 14498:2004 - Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.OLþQHPProdukte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Änderungen von Volumen und Gewicht nach Wechsel-Beanspruchung durch Trocknung an der Luft und Lagerung in WasserProduits et systemes de protection et de réparation des structures en béton - Méthodes d'essai - Changements de volume et de poids des produits d'injection par des cycles de séchage a l'air et de conditionnement dans l'eauProducts and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 14498:2004SIST EN 14498:2004en01-december-2004SIST EN 14498:2004SLOVENSKI
STANDARD



SIST EN 14498:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14498September 2004ICS 91.080.40 English versionProducts and systems for the protection and repair of concretestructures - Test methods - Volume and weight changes ofinjection products after air drying and water storage cyclesProduits et systèmes de protection et de réparation desstructures en béton - Méthodes d'essai - Variations devolume et de poids à l'issue de cycles de séchage à l'air etde conditionnement dans l'eauProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Änderungen von Volumen und Gewicht nach Wechsel-Beanspruchung durch Trocknung an der Luft und Lagerungin WasserThis European Standard was approved by CEN on 16 April 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14498:2004: ESIST EN 14498:2004



EN 14498:2004 (E) 2 Contents page 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Test principle.4 5 Apparatus.4 6 Sampling and preparation.5 7 Procedure.5 8 Expression of results.7 9 Test report.7
SIST EN 14498:2004



EN 14498:2004 (E) 3 Foreword This document (EN 14498:2004) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. It has been drafted by Sub-Committee 8 "Products and systems for the protection and repair of concrete structures" (Secretariat AFNOR). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by March 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 14498:2004



EN 14498:2004 (E) 4 1 Scope This document describes a test method to determine the volume and weight changes of injection products used for swelling fitted filling of cracks, voids and interstices after air drying and water storage cycles. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 196-1:1994, Methods of testing cement – Part 1: Determination of strength. EN 1504-1:1998, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions. prEN 1504-5:2001, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection. 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1504-1:1998 and prEN 1504-5:2001 apply. 4 Test principle The volume and weight changes which occur during air drying and water storage, from 24 h after casting and onwards, are measured on prismatic specimens having
...