iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 976-2:2000

(Main)

Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks

Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks

This part 2 of this European standard EN 976 specifies the requirements for the transportation, site handling, storage and installation of horizontal, cylindrical single wall tanks made of glass reinforced thermosetting resins used for the underground non-pressure storage of liquid petroleum based fuels, complying with the requirement of EN 976-1.

Unterirdische Tanks aus textilglasverstärkten Kunststoffen (GFK) - Liegende zylindrische Tanks für die drucklose Lagerung von flüssigen Kraftstoffen auf Erdölbasis - Teil 2: Transport, Handhabung, Zwischenlagerung und Einbau einwandiger Tanks

Dieser Teil 2 der europäischen Norm EN 976 legt die Anforderungen beim Transport, bei der Handhabung auf der Baustelle, bei der Zwischenlagerung und dem Einbau von liegenden zylindrischen, einwandigen Tanks aus textilglasverstärkten Reaktionsharz-Formstoffen für die unterirdische, drucklose Lagerung von flüssigen Kraftstoffen auf Erdölbasis fest, die den Anforderungen der EN 976-1 entsprechen.

Réservoirs enterrés en plastiques renforcés de verre (PRV) - Réservoirs cylindriques horizontaux pour le stockage sans pression de carburants ou combustibles pétroliers liquides - Partie 2: Transport, manutention, stockage et installation de réservoirs a simple paroi

La présente norme européenne prescrit les prescriptions concernant le transport, la manutention, le stockage et l'installation de réservoirs horizontaux cylindriques a simple paroi en résines thermodurcissables renforcées de fibre de verre utilisés pour le stockage sans pression souterrain de carburants et combustibles pétroliers liquides conformes aux prescriptions de l'EN 976-1.

Podzemni rezervoarji iz armiranega poliestra - Horizontalni cilindrični rezervoarji za breztlačno shranjevanje utekočinjenih goriv na osnovi nafte - 2. del: Transport, rokovanje, shranjevanje in postavitev enoplaščnih rezervoarjev

General Information

Status
Published
Publication Date
30-Nov-2000
ICS
23.020.10 - Stationary containers and tanks
Technical Committee
TLP - Pressure vessels
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2000
Due Date
01-Dec-2000
Completion Date
01-Dec-2000
Directive
TP181 - Uredba o vrsti dejavnosti in naprav, ki lahko povzročajo onesnaževanje okolja večjega obsega
TRRTP129 - Tehnična smernica TSG-12640-001:2008 Zdravstveni objekti
Ref Project
EN 976-2:1997 - Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks

Buy Standard

EN 976-2:2000 (EN)EN 976-2:2000 (EN)
PreviousNext
Standard
EN 976-2:2000 (EN)
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN 976-2:2000 (DE)EN 976-2:2000 (DE)
PreviousNext
Standard
EN 976-2:2000 (DE)
German language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 976-2:2000
01-december-2000
3RG]HPQLUH]HUYRDUMLL]DUPLUDQHJDSROLHVWUD+RUL]RQWDOQLFLOLQGULþQLUH]HUYRDUML
]DEUH]WODþQRVKUDQMHYDQMHXWHNRþLQMHQLKJRULYQDRVQRYLQDIWHGHO7UDQVSRUW
URNRYDQMHVKUDQMHYDQMHLQSRVWDYLWHYHQRSODãþQLKUH]HUYRDUMHY
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for
the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling,
storage and installation of single wall tanks
Unterirdische Tanks aus textilglasverstärkten Kunststoffen (GFK) - Liegende zylindrische
Tanks für die drucklose Lagerung von flüssigen Kraftstoffen auf Erdölbasis - Teil 2:
Transport, Handhabung, Zwischenlagerung und Einbau einwandiger Tanks
Réservoirs enterrés en plastiques renforcés de verre (PRV) - Réservoirs cylindriques
horizontaux pour le stockage sans pression de carburants ou combustibles pétroliers
liquides - Partie 2: Transport, manutention, stockage et installation de réservoirs a simple
paroi
Ta slovenski standard je istoveten z: EN 976-2:1997
ICS:
23.020.10 1HSUHPLþQHSRVRGHLQ Stationary containers and
UH]HUYRDUML tanks
SIST EN 976-2:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 976-2:2000

---------------------- Page: 2 ----------------------

SIST EN 976-2:2000

---------------------- Page: 3 ----------------------

SIST EN 976-2:2000

---------------------- Page: 4 ----------------------

SIS
...

SLOVENSKI STANDARD
SIST EN 976-2:2000
01-december-2000
3RG]HPQLUH]HUYRDUMLL]DUPLUDQHJDSROLHVWUD+RUL]RQWDOQLFLOLQGULþQLUH]HUYRDUML
]DEUH]WODþQRVKUDQMHYDQMHXWHNRþLQMHQLKJRULYQDRVQRYLQDIWHGHO7UDQVSRUW
URNRYDQMHVKUDQMHYDQMHLQSRVWDYLWHYHQRSODãþQLKUH]HUYRDUMHY
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for
the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling,
storage and installation of single wall tanks
Unterirdische Tanks aus textilglasverstärkten Kunststoffen (GFK) - Liegende zylindrische
Tanks für die drucklose Lagerung von flüssigen Kraftstoffen auf Erdölbasis - Teil 2:
Transport, Handhabung, Zwischenlagerung und Einbau einwandiger Tanks
Réservoirs enterrés en plastiques renforcés de verre (PRV) - Réservoirs cylindriques
horizontaux pour le stockage sans pression de carburants ou combustibles pétroliers
liquides - Partie 2: Transport, manutention, stockage et installation de réservoirs a simple
paroi
Ta slovenski standard je istoveten z: EN 976-2:1997
ICS:
23.020.10 1HSUHPLþQHSRVRGHLQ Stationary containers and
UH]HUYRDUML tanks
SIST EN 976-2:2000 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 976-2:2000

---------------------- Page: 2 ----------------------

SIST EN 976-2:2000

---------------------- Page: 3 ----------------------

SIST EN 976-2:2000

---------------------- Page: 4 ----------------------

SIS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15969-2:2022(Main)
Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 2: Commercial and logistic data
EN 15969-2:2022

This European Standard specifies the data structure needed for tour management, scheduling orders of measured and unmeasured products online to the truck. Processed orders are transferred back to the host in the office at once or later every time the truck is online.
It specifies the transfer of commercial and logistic data between transport vehicle equipment, on board computer of the tank vehicle and stationary facilities for all communication channels between these parties.
This document should only be used in conjunction with EN 15969-1 and should not modify or override any of the requirements of EN 15969-1.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15969-1:2022(Main)
Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 1: Protocol specification - Control, measurement and event data
EN 15969-1:2022

This document specifies data protocols and data format for the communication between electronic
equipment (TVE), on-board computer (OBC) of the tank vehicle and stationary equipment.
This document specifies the basic protocol FTL used in the communication (basic protocol layer), the
format and structure of FTL-data to be transmitted (data protocol layer) and describes the content of the
FTL-data.
This data protocol can be used for other application e.g. between stationary tank equipment and offices.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13799:2022(Main)
LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
EN 13799:2022

This European Standard specifies minimum requirements for design and testing of contents gauges, which are directly connected to transportable tanks, drums, cylinders and static LPG tanks above 0,5 l water capacity excluding those used for automotive containers. This European Standard does not apply to refineries or other process plants.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13121-1:2021(Main)
GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria
EN 13121-1:2021

This document gives requirements for specification and acceptance conditions of raw materials for GRP tanks and vessels with or without lining for storage or processing of fluids, factory made or site built, non-pressurised or pressurised, for use above ground.
Tanks and vessels for storage or processing of food, raw materials for food and potable water additionally have to be in compliance with relevant EU directives and applicable national standards and regulations.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12542:2020(Main)
LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
EN 12542:2020

This European Standard specifies requirements for the design and manufacture of static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) with a volume not greater than 13 m³ and for installation above or below ground.

  • Standard
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12285-3:2019(Main)
Workshop fabricated steel tanks - Part 3: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids for heating and cooling of buildings
EN 12285-3:2019

This document specifies the product characteristics and test/assessment methods for workshop
fabricated cylindrical, horizontal steel tanks, single (type S) and double skin (type D) intended to be
used for the underground storage of water polluting liquids (both flammable and non-flammable),
specifically used for storage and/or supply of fuel for building heating/cooling systems, and of hot or
cold water not intended for human consumption at normal ambient temperature conditions (−20 °C to
+50 °C) within the following limits:
— from 800 mm up to 3000 mm nominal diameter and;
— up to a maximum overall length of 6 times the nominal diameter;
— for liquids with a maximum density of up to 1,1 kg/l and;
— with an operating pressure (Po) of maximum 50 kPa (0,5 bar(g)) and minimum – 5 kPa (–50
mbar(g)) and;
— for double skin tanks with a vacuum leak detection system where the kinematic viscosity does not
exceed 5 × 10−3 m2/s.
Two tank types are distinguished:
— Type S: Single skin;
— Type D: Double skin.
Tanks designed to this document allow for an earth cover of up to 1,5 m. If there are imposed traffic
loads or a greater earth cover, calculation will occur.
This document is not applicable to tanks installed in industrial processes or in petrol stations, nor to
loads and special measures necessary in areas subject to risk of earthquakes and/or to flooding.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12285-1:2018(Main)
Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings
EN 12285-1:2018

This document specifies the product characteristics and test methods for workshop fabricated cylindrical,
horizontal steel tanks, single (type S) and double skin (type D) intended to be used for the underground
storage of water polluting liquids (both flammable and non-flammable) and installed in industrial processes
or in petrol stations at normal ambient temperature conditions (−20 °C to +50 °C) within the following
limits:
— from 800 mm up to 3 000 mm nominal diameter and;
— up to a maximum overall length of 6 times the nominal diameter;
— with an operating pressure (Po) of maximum 50 kPa (0,5 bar(g)) and minimum – 5 kPa (–50 mbar(g))
and;
— for double skin tanks with a vacuum leak detection system where the kinematic viscosity does not
exceed 5 × 10−3 m2/s.
Tanks designed to this standard allow for an earth cover of up to 1,5 m. If there are imposed traffic loads or a
greater earth cover, calculation is expected to be carried out.
This document is not applicable to tanks used for storage and/or supply of fuel/gas for building
heating/cooling systems, and of hot or cold water not intended for human consumption, nor to loads and
special measures necessary in areas subject to risk of earthquakes.
Guidance on installation of tanks is presented in Annex A, which does not include special measures that
might be necessary in areas subject to flooding.
This document is not applicable for the storage of liquids having dangerous goods classes listed in Table 1
because of the special dangers involved.

  • Standard
    119 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 13121-5:2018(Main)
GRP tanks and vessels for use above ground - Part 5: Example calculation of a GRP-vessel
CEN/TR 13121-5:2017

This Technical Report gives guidance for the design of a vessel using the standard EN 13121-3 GRP tanks and vessels for use above ground. The calculation is done according to the advanced design method given in EN 13121-3:2016, 7.9.3 with approved laminates and laminate properties.

  • Technical report
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13160-3:2016(Main)
Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks
EN 13160-3:2016

This standard gives requirements and the corresponding test/assessment methods applicable to leak detection kits based on the drop of the liquid level in the leak detector header tank. The kits are usually composed of:
- sensing device;
- evaluation device;
- alarm device.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13160-5:2016(Main)
Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
EN 13160-5:2016

This standard gives requirements and the corresponding test/assessment methods applicable to leak detection kits, based upon volumetric loss from within the tank or pressurised pipework system. The kits are usually composed by:
- measuring device
; - evaluation device
; - alarm device

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day