SIST EN 13087-6:2012
(Main)Protective helmets - Test methods - Part 6: Field of vision
Protective helmets - Test methods - Part 6: Field of vision
This European Standard specifies methods of test for protective helmets. The purpose of these tests is to enable assessment of the performance of the helmet as specified in the appropriate helmet standard.
This European Standard specifies the method of test for field of vision.
Schutzhelme - Prüfverfahren - Teil 6: Sichtfeld
Die Europäische Norm legt Prüfverfahren für Schutzhelme fest. Zweck dieser Prüfungen ist die Beurteilung der Gebrauchstauglichkeit des Helmes, wie es in der entsprechenden Norm für Helme festgelegt ist.
Diese Europäische Norm legt das Prüfverfahren für das Sichtfeld fest.
Casques de protection - Méthodes d'essai - Partie 6: Champ visuel
La présente Norme européenne décrit des méthodes d'essai pour les casques de protection. Ces essais sont
destinés à permettre l’évaluation de la performance du casque spécifiée dans la norme de casque appropriée.
La présente Norme européenne spécifie la méthode d'essai pour le champ visuel.
Varovalne čelade - Preskusne metode - 6. del: Vidno polje
Ta evropski standard določa preskusne metode za varovalne čelade. Namen teh preskusov je omogočiti oceno lastnosti čelade, kot je določeno v ustreznem standardu za čelado. Ta evropski standard določa preskusne metode za vidno polje.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzhelme - Prüfverfahren - Teil 6: SichtfeldCasques de protection - Méthodes d'essai - Partie 6: Champ visuelProtective helmets - Test methods - Part 6: Field of vision13.340.20Varovalna oprema za glavoHead protective equipmentICS:Ta slovenski standard je istoveten z:EN 13087-6:2012SIST EN 13087-6:2012en,fr,de01-julij-2012SIST EN 13087-6:2012SLOVENSKI
STANDARDSIST EN 13087-6:2000/A1:2002SIST EN 13087-6:20001DGRPHãþD
SIST EN 13087-6:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13087-6
February 2012 ICS 13.340.20 Supersedes EN 13087-6:2000English Version
Protective helmets - Test methods - Part 6: Field of vision
Casques de protection - Méthodes d'essai - Partie 6: Champ visuel
Schutzhelme - Prüfverfahren - Teil 6: Sichtfeld This European Standard was approved by CEN on 17 December 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13087-6:2012: ESIST EN 13087-6:2012
EN 13087-6:2012 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .53Terms and definitions .54Prerequisites .55Methods .55.1General .55.2Principle .65.3Apparatus .65.4Procedure .65.5Report .6Annex A (normative)
Test results – Uncertainty of measurement .8Annex B (informative)
Significant technical changes between this European Standard and EN 13087-6:2000.9Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC Personal Protective Equipment . 10 SIST EN 13087-6:2012
EN 13087-6:2012 (E) 3 Foreword This document (EN 13087-6:2012) has been prepared by Technical Committee CEN/TC 158 “Head protection”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13087-6:2000. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. Annex B provides details of significant technical changes between this European Standard and the previous edition. This European Standard consists of the following ten parts: Part 1 : Conditions and conditioning; Part 2 : Shock absorption; Part 3 : Resistance to penetration; Part 4 : Retention system effectiveness; Part 5 : Retention system strength; Part 6 : Field of vision; Part 7 : Flame resistance; Part 8 : Electrical properties; Part 9 : Mechanical rigidity1; Part 10 : Resistance to radiant heat. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.