Protective equipment for martial arts - Part 8: Additional requirements and test methods for karate face protectors

This European standard specifies additional test methods and requirements for face protectors, used in the practice of karate.
This European Standard is not applicable for other sports equipment and protectors except face protectors for karate because the test methods and requirements are very specific for karate face protectors and do not meet the characteristics of face protectors for other sports.

Schutzausrüstung für den Kampfsport - Teil 8: Zusätzliche Anforderungen und Prüfverfahren für Gesichtsschützer für Karate

Diese Europäische Norm legt zusätzliche Prüfverfahren und Anforderungen für Gesichtsschützer fest, die bei der Ausübung von Karate verwendet werden.
Diese Europäische Norm gilt außer für Gesichtsschützer für Karate für keine andere Sportausrüstung und keine anderen Schützer, da die Prüfverfahren und Anforderungen für Gesichtsschützer für Karate sehr spezifisch sind und nicht den Eigenschaften von Gesichtsschützern für andere Sportarten entsprechen.

Equipement de protection pour les arts martiaux - Partie 8 : Exigences et méthodes d'essai complémentaires pour les protections faciales de karaté

La présente Norme européenne spécifie des exigences et des méthodes d'essai complémentaires relatives aux protections faciales utilisées dans la pratique du karaté.
Elle n'est pas applicable aux autres protecteurs et équipements sportifs car les exigences et méthodes d'essai décrites sont tout à fait spécifiques des protections faciales de karaté et ne répondent pas aux caractéristiques des protections faciales utilisées dans la pratique des autres sports.

Varovalna oprema za borilne športe - 8. del: Dodatne zahteve in preskusne metode za ščitnike obraza pri karateju

Ta evropski standard določa dodatne preskusne metode in zahteve za ščitnike za obraz, ki se uporabljajo pri treningu karateja. Ta evropski standard se ne uporablja za drugo športno opremo in ščitnike, ker so preskusne metode in zahteve oblikovane posebej za ščitnike za obraz za karate in niso skladne z lastnostmi ščitnikov za obraz za druge športe.

General Information

Status
Published
Public Enquiry End Date
24-Oct-2016
Publication Date
14-Dec-2017
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
08-Dec-2017
Due Date
12-Feb-2018
Completion Date
15-Dec-2017

Buy Standard

Standard
SIST EN 13277-8:2018
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzausrüstung für den Kampfsport - Teil 8: Zusätzliche Anforderungen und Prüfverfahren für Gesichtsschützer für KarateEquipement de protection pour les arts martiaux - Partie 8 : Exigences et méthodes d'essai complémentaires pour les protections faciales de karatéProtective equipment for martial arts - Part 8: Additional requirements and test methods for karate face protectors97.220.30Oprema za dvoranske športeIndoor sports equipment13.340.20Varovalna oprema za glavoHead protective equipmentICS:Ta slovenski standard je istoveten z:EN 13277-8:2017SIST EN 13277-8:2018en,fr,de01-januar-2018SIST EN 13277-8:2018SLOVENSKI

STANDARD
SIST EN 13277-8:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13277-8
November
t r s y ICS
s uä u v rä t r English Version
Protective equipment for martial arts æ Part

zã Additional requirements and test methods for karate face protectorsEquipement de protection pour les arts martiaux æ Partie

z ã Exigences et méthodes d 5essai complémentaires pour les protections faciales de karaté

Schutzausrüstung für den Kampfsport æ Teil

zã Zusätzliche Anforderungen und Prüfverfahren für Gesichtsschützer für Karate This European Standard was approved by CEN on

t w September
t r s yä

egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä

translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä

CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä

EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels

t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN

s u t y yæ zã t r s y ESIST EN 13277-8:2018

EN 13277-8:2017 (E) 2 Contents Page European foreword ....................................................................................................................................................... 3 Introduction .................................................................................................................................................................... 4 1 Scope .................................................................................................................................................................... 5 2 Normative references .................................................................................................................................... 5 3 Terms and definitions ................................................................................................................................... 5 4 Requirements ................................................................................................................................................... 5 4.1 General ................................................................................................................................................................ 5 4.2 Openings ............................................................................................................................................................. 5 4.3 Mass ...................................................................................................................................................................... 5 4.4 Size ........................................................................................................................................................................ 6 4.5 Field of vision .................................................................................................................................................... 6 4.6 Headforms ......................................................................................................................................................... 6 4.7 Restraint system .............................................................................................................................................. 8 4.8 Nose clearance ................................................................................................................................................. 8 4.9 Protection zone ................................................................................................................................................ 8 4.10 Flexibility/deformation ................................................................................................................................ 9 4.11 Impact strength ................................................................................................................................................ 9 5 Test methods .................................................................................................................................................... 9 5.1 General ................................................................................................................................................................ 9 5.2 Sampling ............................................................................................................................................................. 9 5.3 Conditioning ................................................................................................................................................... 10 5.4 Field of vision ................................................................................................................................................. 10 5.5 Restraint test ................................................................................................................................................. 10 5.6 Nose clearance .............................................................................................................................................. 11 5.7 Protection zone ............................................................................................................................................. 12 5.8 Flexibility/deformation ............................................................................................................................. 12 5.9 Impact test ...................................................................................................................................................... 13 6 Marking ............................................................................................................................................................ 14 7 Additional information supplied by the manufacturer .................................................................. 14 Annex ZA (informative)

Relationship between this European Standard and the essential Requirements of EU Directive 89/686/EEC aimed to be covered .............................................. 15 Annex ZB Annex ZB (informative)

Relationship between this European Standard and the essential requirements of REGULATION (EU) 2016/425 EEC aimed to be covered ............ 16

SIST EN 13277-8:2018

EN 13277-8:2017 (E) 3 European foreword This document (EN 13277-8:2017) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2018, and conflicting national standards shall be withdrawn at the latest by May 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA and ZB, which are integral parts of this document. EN 13277, Protective equipment for martial arts, consists of the following parts: — Part 1: General requirements and test methods — Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors — Part 3: Additional requirements and test methods for trunk protectors — Part 4: Additional requirements and test methods for head protectors — Part 5: Additional requirements and test methods for genital protectors and abdominal protectors — Part 6: Additional requirements and test methods for breast protectors for females — Part 7: Additional requirements and test methods for hand and foot protectors — Part 8: Additional requirements and test methods for karate face protectors According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 13277-8:2018

EN 13277-8:2017 (E) 4 Introduction Karate face protectors are individual elements in protection equipment for protecting the upper part of the face: nose, cheekbones, eyebrows, temple and eyes in the practice of karate. They are designed to provide a high degree of security in case of accidental contact during the practice of karate. A hard and uncontrolled knock in the face can produce severe injuries. SIST EN 13277-8:2018

EN 13277-8:2017 (E) 5 1 Scope This European Standard specifies additional test methods and requirements for face protectors, used in the practice of karate. This European Standard is not applicable for other sports equipment and protectors except face protectors for karate, because the test methods and requirements are very specific for karate face protectors and do not meet the characteristics of face protectors for other sports. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13087-6, Protective helmets - Test methods - Part 6: Field of vision EN 13277-1:2000, Protective equipment for martial arts - Part 1: General requirements and test methods EN 13277-2:2000, Protective equipment for martial arts - Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors EN 168, Personal eye-protection - Non-optical test methods 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13277-1 and EN 168 apply. 4 Requirements 4.1 General The general requirements for karate face protectors shall be in accordance

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.