SIST EN 1888-2:2019

Child care articles - Wheeled child conveyances - Part 2: Pushchairs for children above 15 kg up to 22 kg

This European Standard specifies the additional safety requirements and test methods for pushchairs, designed for the carriage of one or more children, to cover the use from 15 kg up to 22 kg each.
This standard applies in conjunction and in addition to the European standard EN 1888-1 "Child use and care articles - Wheeled child conveyances - Pushchairs and pram body"

Artikel für Säuglinge und Kleinkinder - Transportmittel auf Rädern für Kinder - Teil 2: Kinderwagen für schwerere Kinder

Diese Europäische Norm legt die ergänzenden Sicherheitsanforderungen und Prüfverfahren für Kindersportwagen, die zur Beförderung von einem oder mehreren Kindern, jeweils mit einem Gewicht von über 15 kg und bis 22 kg, vorgesehen sind.
Diese Europäische Norm gilt gemeinsam mit und ergänzend zu der Europäischen Norm EN 1888 1 und kann nicht separat angewendet werde

Articles de puériculture - Voitures d’enfant - Partie 2 : Poussettes pour enfants de 15 kg à 22 kg

La présente Norme européenne spécifie les exigences de sécurité et les méthodes d’essai complémentaires relatives aux poussettes destinées à transporter un ou plusieurs enfants pesant chacun plus de 15 kg, jusqu’à 22 kg.
La présente Norme européenne est applicable conjointement avec la Norme européenne EN 1888-1, et en complément de celle-ci. Elle ne peut donc pas être utilisée séparément.

Izdelki za otroke - Otroški vozički - 2. del: Otroški vozički s sedežem za otroke, težke nad 15 kg do 22 kg

Ta evropski standard določa dodatne varnostne zahteve in preskusne metode za otroške vozičke, namenjene prevozu enega ali več otrok, ki tehtajo od 15 kg do največ 22 kg.  Ta standard se uporablja v povezavi in skupaj z evropskim standardom EN 1888-1 »Izdelki za otroke - Otroški vozički - Otroški vozički s sedežem in otroški vozički s košaro«.

General Information

• Status: Published
• Public Enquiry End Date: 02-Jan-2017
• Publication Date: 11-Mar-2019
• ICS: 97.190 - Equipment for children
• Technical Committee: OTR - Child use and care article
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 04-Mar-2019
• Due Date: 09-May-2019
• Completion Date: 12-Mar-2019
• Mandate: M/264 - Mandate to CEN and CENELEC in the field of consumer safety related to the safety of child-care articles
• Ref Project: EN 1888-2:2018 - Child care articles - Wheeled child conveyances - Part 2: Pushchairs for children above 15 kg up to 22 kg

Relations

• Replaces: SIST EN 1888:2012 - Child care articles - Wheeled child conveyances - Safety requirements and test methods
• Effective Date: 01-Apr-2019
• Revised: SIST EN 1888-2:2019/kFprA1:2022 - Child care articles - Wheeled child conveyances - Part 2: Pushchairs for children above 15 kg up to 22 kg
• Effective Date: 01-Sep-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Artikel für Säuglinge und Kleinkinder - Transportmittel auf Rädern für Kinder - Teil 2: Kinderwagen für schwerere KinderArticles de puériculture - Voitures d’enfant - Partie 2 : Poussettes pour enfants de 15 kg à 22 kgChild care articles - Wheeled child conveyances - Part 2: Pushchairs for children above 15 kg up to 22 kg97.190Otroška opremaEquipment for childrenICS:Ta slovenski standard je istoveten z:EN 1888-2:2018SIST EN 1888-2:2019en,fr,de01-april-2019SIST EN 1888-2:2019SLOVENSKI

STANDARDSIST EN 1888:20121DGRPHãþD
SIST EN 1888-2:2019
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1888-2
December
t r s z ICS
{ yä s { r English Version
Child care articles æ Wheeled child conveyances æ Part
tã Pushchairs for children above
s w kg up to
t t kg Articles de puériculture æ Voitures d 5enfant æ Partie
t ã Poussettes pour enfants de
s w kg à
t t kg

Artikel für Säuglinge und Kleinkinder æ Transportmittel auf Rädern für Kinder æ Teil

tã Kinderwagen für schwerere Kinder This European Standard was approved by CEN on

t u April
t r s zä

egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä

translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä

CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä

EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels

t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN

s z z zæ tã t r s z ESIST EN 1888-2:2019

EN 1888-2:2018 (E) 2 Contents Page European foreword ....................................................................................................................................................... 3 1 Scope (see Annex A) ....................................................................................................................................... 4 2 Normative references .................................................................................................................................... 4 3 Terms and definitions ................................................................................................................................... 4 4 General requirements and test conditions ............................................................................................ 4 4.1 General requirement (see Annex B) ......................................................................................................... 4 4.2 Test conditions ................................................................................................................................................. 4 5 Test equipment - Test mass H ..................................................................................................................... 4 6 Mechanical hazards ........................................................................................................................................ 5 6.1 Restraint system .............................................................................................................................................. 5 6.1.1 Additional dimensional requirement ...................................................................................................... 5 6.1.2 Test method ...................................................................................................................................................... 5 6.1.3 Attachment of the restraint system to seat unit .................................................................................. 5 6.1.4 Strength of fasteners ...................................................................................................................................... 5 6.2 Parking and braking devices....................................................................................................................... 5 6.3 Stability ............................................................................................................................................................... 6 6.4 Structural integrity ......................................................................................................................................... 6 6.4.1 Strength and durability of attachment devices for seat units ......................................................... 6 6.4.2 Irregular surface test ..................................................................................................................................... 6 6.4.3 Dynamic strength ............................................................................................................................................ 6 6.4.4 Handle strength ............................................................................................................................................... 6 7 Product information ...................................................................................................................................... 6 7.1 Marking of product ......................................................................................................................................... 6 7.2 Purchase information .................................................................................................................................... 7 7.3 Instructions for use ........................................................................................................................................ 7 Annex A (informative)

Rationale — Scope .......................................................................................................... 8 Annex B (normative)

Sequence for testing (see figures) ............................................................................... 9 Bibliography ................................................................................................................................................................. 11

SIST EN 1888-2:2019

EN 1888-2:2018 (E) 3 European foreword This document (EN 1888-2:2018) has been prepared by Technical Committee CEN/TC 252 “Child care articles”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be withdrawn at the latest by June 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. In November 2014 the European Working Group CEN TC 252/WG 3 decided to split EN 1888 into different parts to clearly treat in a different way, new products or new functions of wheeled child conveyances. EN 1888-2 covers pushchairs designed for the carriage of children up to 22 kg and is only applicable in conjunction with EN 1888-1, which states general requirements for pushchairs and prams. Compliance with EN 1888-1 is made mandatory to comply with EN 1888-2. EN 1888 is currently composed with the following parts: — EN 1888-1, Child care articles — Wheeled child conveyances — Part 1: Pushchairs and prams; — EN 1888-2, Child care articles — Wheeled child

...

SLOVENSKI STANDARD
oSIST prEN 1888-2:2016
01-december-2016
,]GHONL]DRWURNH2WURãNLYR]LþNLGHOâSRUWQLYR]LþNL]DWHåMHRWURNH

Child care articles - Wheeled child conveyances - Part 2: Pushchairs for heavier children

Artikel für Säuglinge und Kleinkinder - Transportmittel auf Rädern für Kinder - Teil 2:

Kinderwagen für schwerere Kinder

Articles de puériculture - Voitures d'enfant - Partie 2 : Poussettes pour enfants plus

lourds
Ta slovenski standard je istoveten z: prEN 1888-2
ICS:
97.190 Otroška oprema Equipment for children
oSIST prEN 1888-2:2016 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1888-2:2016
---------------------- Page: 2 ----------------------
oSIST prEN 1888-2:2016
DRAFT
EUROPEAN STANDARD
prEN 1888-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2016
ICS 97.190
English Version
Child care articles - Wheeled child conveyances - Part 2:
Pushchairs for heavier children

Articles de puériculture - Voitures d'enfant - Partie 2 : Artikel für Säuglinge und Kleinkinder - Transportmittel

Poussettes pour enfants de poids élevé auf Rädern für Kinder - Teil 2: Kinderwagen für

schwerere Kinder

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 252.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1888-2:2016 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 1888-2:2016
prEN 1888-2:2016 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Introduction .................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions ................................................................................................................................... 5

4 General requirements and test conditions - Samples ........................................................................ 5

5 Test equipment - Test mass H ..................................................................................................................... 5

6 Mechanical hazards ........................................................................................................................................ 6

6.1 Restraint system .............................................................................................................................................. 6

6.1.1 Dimensional requirements.......................................................................................................................... 6

6.1.2 Test method ...................................................................................................................................................... 6

6.1.3 Attachment of the restraint system to seat unit .................................................................................. 6

6.2 Parking and braking devices....................................................................................................................... 6

6.3 Stability ............................................................................................................................................................... 6

6.4 Structural integrity ......................................................................................................................................... 6

6.4.1 Strength and durability of attachment devices for seat units ......................................................... 6

6.4.2 Irregular surface test ..................................................................................................................................... 6

6.4.3 Dynamic strength ............................................................................................................................................ 6

6.4.4 Handle strength ............................................................................................................................................... 7

7 Product information ...................................................................................................................................... 7

7.1 Marking of product ......................................................................................................................................... 7

7.2 Purchase information .................................................................................................................................... 7

7.3 Instructions for use ........................................................................................................................................ 7

Annex A (informative) Sequence for testing (chart) ....................................................................................... 8

Bibliography ................................................................................................................................................................. 12

---------------------- Page: 4 ----------------------
oSIST prEN 1888-2:2016
prEN 1888-2:2016 (E)
European foreword

This document (prEN 1888-2:2016) has been prepared by Technical Committee CEN/TC 252 “Child use

and care articles”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association.
---------------------- Page: 5 ----------------------
oSIST prEN 1888-2:2016
prEN 1888-2:2016 (E)
Introduction

In November 2014 the European Working Group decided to split EN 1888 standard into different parts

to clearly treat in a different way, new products or new functions of wheeled child conveyances.

EN 1888-2 covers pushchairs designed for the carriage of heavier children (up to 22 kg) and is only

applicable in conjunction with EN 1888-1, which states general requirements for pushchairs and prams.

Compliance with EN 1888-1 is mandatory to comply with EN 1888-2.
---------------------- Page: 6 ----------------------
oSIST prEN 1888-2:2016
prEN 1888-2:2016 (E)
1 Scope

This European Standard specifies the additional safety requirements and test methods for pushchairs,

designed for the carriage of one or more children, above15 kg and up to 22 kg each.

This European Standard applies in conjunction with and in addition to the European standard

EN 1888-1 and it cannot be used separately
2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are

indispensable for its application. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any amendments) applies.

prEN 1888-1:2015, Child care articles - Wheeled child conveyances - Part 1: Pushchairs and prams

3 Terms and definitions

For the purposes of this document, the terms and definitions given in prEN 1888-1:2015 apply.

4 General requirements and test conditions - Samples
Tests shall
...