iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50160:2011/A3:2019

(Amendment)

Voltage characteristics of electricity supplied by public electricity networks

Voltage characteristics of electricity supplied by public electricity networks

New values for the 15th and 21st harmonic

Merkmale der Spannung in öffentlichen Elektrizitätsversorgungsnetzen

Caractéristiques de la tension fournie par les réseaux publics de distribution

Značilnosti napetosti v javnih razdelilnih omrežjih - Dopolnilo A3

General Information

Status
Published
Publication Date
15-Oct-2019
ICS
29.240.01 - Power transmission and distribution networks in general
Technical Committee
NTF - Electricity energy supply systems
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
14-Oct-2019
Due Date
19-Dec-2019
Completion Date
16-Oct-2019
Directive
2016/631 - Commission Regulation (EU) 2016/631 of 14 April 2016 establishing a network code on requirements for grid connection of generators
TP251 - Pravilnik o vrstah podatkov, ki jih zagotavljajo izvajalci energetskih dejavnosti in drugih zavezanci
TP253 - Akt o metodologiji za določitev regulativnega okvira za elektrooperaterje
Mandate
M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
Ref Project
EN 50160:2010/A3:2019 - Voltage characteristics of electricity supplied by public electricity networks

Relations

Replaced By
SIST EN 50160:2023 - Voltage characteristics of electricity supplied by public distribution networks
Effective Date
20-Dec-2022
Revised
SIST EN 50160:2023 - Voltage characteristics of electricity supplied by public distribution networks
Effective Date
24-Dec-2019

Buy Standard

EN 50160:2011/A3:2019EN 50160:2011/A3:2019
PreviousNext
Amendment
EN 50160:2011/A3:2019
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50160:2011/A3:2019
01-november-2019
Značilnosti napetosti v javnih razdelilnih omrežjih - Dopolnilo A3
Voltage characteristics of electricity supplied by public electricity networks
Merkmale der Spannung in öffentlichen Elektrizitätsversorgungsnetzen
Caractéristiques de la tension fournie par les réseaux publics de distribution
Ta slovenski standard je istoveten z: EN 50160:2010/A3:2019
ICS:
29.240.01 Omrežja za prenos in Power transmission and
distribucijo električne energije distribution networks in
na splošno general
SIST EN 50160:2011/A3:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50160:2011/A3:2019

---------------------- Page: 2 ----------------------
SIST EN 50160:2011/A3:2019


EUROPEAN STANDARD EN 50160:2010/A3

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2019
ICS 29.020

English Version
Voltage characteristics of electricity supplied by public electricity
networks
Caractéristiques de la tension fournie par les réseaux Merkmale der Spannung in öffentlichen
publics de distribution Elektrizitätsversorgungsnetzen
This amendment A3 modifies the European Standard EN 50160:2010; it was approved by CENELEC on 2019-03-25. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romani
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50160:2023(Main)
Voltage characteristics of electricity supplied by public distribution networks
EN 50160:2022

1.1   Scope
This document specifies the main characteristics of the voltage at a network user's supply terminals in public low voltage, medium, high, and extra-high voltage AC electricity networks under normal operating conditions. This document specifies the limits or values within which the voltage characteristics can be expected to remain at any supply terminal in public European electricity networks, only.
NOTE 1   If non-public networks (e.g. residential quarters, energy communities, office centres, shopping centres) have similar end-users as public networks, it is strongly advised to apply the same requirements as for public networks.
NOTE 2   Industrial networks are excluded from the scope of EN 50160, only the connection to the supply terminals of the public network is relevant, here.
This document does not apply under abnormal operating conditions, including the following:
a)   a temporary supply arrangement to keep network users supplied during conditions arising as a result of a fault, maintenance and construction work, or to minimize the extent and duration of a loss of supply.
b)   in the case of non-compliance of a network user's installation or equipment with the relevant standards or with the technical requirements for connection, established either by the public authorities or the network operator, including the limits for the emission of conducted disturbances.
NOTE 4   A network user’s installation can include load and generation.
c)   in exceptional situations, in particular:
1)   exceptional weather conditions and other natural disasters;
2)   third party interference;
3)   acts by public authorities,
4)   industrial actions (subject to legal requirements);
5)   force majeure;
6)   power shortages resulting from external events.
The voltage characteristics given in this document refer to conducted disturbances in public electric power networks. They are not intended to be used as electromagnetic compatibility (EMC) levels or product emission limits.
Power quality is related to EMC in several ways – especially because compliance with power quality requirements depends on the control of cumulative effect of electromagnetic emissions from all/multiple equipment and/or installations. Therefore, the voltage characteristics given in this document gives guidance for specifying requirements in equipment product standards and in installation standards.
NOTE 5   The performance of equipment might be impaired if it is subjected to supply conditions which are not specified in the equipment product standard.
NOTE 6   This document can be superseded in total or in part by the terms of a contract between the individual network user and the network operator.
NOTE 7   The sharing of complaint management and problem mitigation costs between the involved parties is outside the scope of EN 50160.
Measurement methods to be applied in this document are described in EN 61000 4 30.
1.2   Object
The object of this document is to define, describe and specify the characteristics of the supply voltage concerning:
a)   Frequency;
b)   Magnitude;
c)   Waveform;
d)   Symmetry of the line voltages.
This document also covers the continuous characteristics of the supply voltage and other foreseeable phenomena which may influence the voltage characteristics, such as e.g. operational communication, monitoring or measurement signals which are transmitted via power lines.
These characteristics are subject to variations during the normal operation of a supply system due to changes of load, disturbances generated by certain equipment and the occurrence of faults which are mainly caused by external events.
The characteristics vary in a manner which is random in time, with reference to any specific supply terminal, and random in location, with reference to any given instant of time. Because of these variations, the values given in this document for the characteristics can be expected to be exceeded on a small number of occasions.
[...]

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50549-10:2023(Main)
Requirements for generating plants to be connected in parallel with distribution networks - Part 10: Tests for conformity assessment of generating units
EN 50549-10:2022

The purpose of this document is to provide technical guidance for tests on generating units and interface protection to evaluate their electrical characteristics.
NOTE 1    Mechanical issues are taken into account as far as they influence the electrical characteristics.
The evaluation results are intended to be used to demonstrate conformity of generating units to technical requirements for grid connection. In this context the evaluation results can also be used as part of a certification programme.
NOTE 2    Besides the type test results of the generating unit all additional elements for connection to the grid (e.g. transformer, cabling, multiple units) are considered in the evaluation of the final installation of a generating plant.
The requirements to be evaluated are covered in the following standardization documents:
–   EN 50549 1:2019: Requirements for generating plants to be connected in parallel with distribution networks - Part 1: connection to a LV distribution network - Generating plants up to and including Type B
–   EN 50549 2:2019: Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network - Generating plants up to and including Type B
If grid connection requirements are dealt with in other documents or for other generating module types, where no specific testing procedure is provided, testing methods of this document can be used if applicable.
This document provides evaluation criteria for the conformity assessment of generating units with respect to the above mentioned standardization documents, based on type testing. However, some requirements are applicable on the generating plant level. The assessment of the conformity to these plant requirements are out of the scope of this document. Nevertheless, this document may be used to show the capabilities of a generating unit to be used in a plant.
As a consequence, it is possible that the conformity assessment of a generating unit does not cover all aspects of the above-mentioned standardization documents, typically when a requirement is evaluated on a plant level. Therefore, the conformity assessment report indicates clearly which clauses of this document are covered and which clauses are not covered.
This document recognizes the existence of specific technical test requirements within several member states that must be complied with.

  • Standard
    168 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC/TS 50654-1:2020(Main)
HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 1: Guidelines
CLC/TS 50654-1:2020

This document in conjunction with CLC/TS 50654-2: 2018-03 Parameter Lists to Functional Specifications describes specific functional requirements for HVDC Grid Systems in Europe. The terminology "HVDC Grid Systems" is used here describing HVDC systems for power transmission having more than two converter stations connected to a common DC circuit.
While this document focuses on requirements, that are specific for HVDC Grid Systems, some requirements are considered applicable to all HVDC systems in general, i.e. including point-to-point HVDC systems. Existing IEC, Cigré or other documents relevant have been used for reference as far as possible.
Corresponding to electric power transmission applications, this document is applicable to high voltage systems, i.e. only nominal DC voltages equal or higher than 50 kV with respect to earth are considered in this document.

  • Technical specification
    124 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC/TS 50654-2:2020(Main)
HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 2: Parameter Lists
CLC/TS 50654-2:2020

This document in conjunction with CLC/TS 50654-1: 2018-03 Guideline for Functional Specifications describes specific functional requirements for HVDC Grid Systems in Europe. The terminology “HVDC Grid Systems” is used here describing HVDC systems for power transmission having more than two converter stations connected to a common DC circuit.
While this document focuses on requirements, that are specific for HVDC Grid Systems, some requirements are considered applicable to all HVDC systems in general, i.e. including point-to-point HVDC systems. Existing IEC, Cigré or other documents relevant have been used for reference as far as possible.
Corresponding to electric power transmission applications, this document is applicable to high voltage systems, i.e. only nominal DC voltages equal or higher than 50 kV with respect to earth are considered in this document.

  • Technical specification
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50160:2011/A2:2019(Amendment)
Voltage characteristics of electricity supplied by public electricity networks
EN 50160:2010/A2:2019

3 rather small amendments
A note 2 will solve the issue of the different approaches in frequency
Flagged data idea (IEC TS 62749) will be integrated in EN 50160
A new chapter “Frequency range 2-150kHz” will be integrated

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50549-1:2019/AC:2019(Corrigendum)
Requirements for generating plants to be connected in parallel with distribution networks - Part 1: Connection to a LV distribution network - Generating plants up to and including Type B
EN 50549-1:2019/AC:2019-04

These standards provide technical requirements for the connection of generating plants up to and including Type A (-1-1)/ Type B (-1-2) which can be operated in parallel with a public LV distribution network. They are intended to be used as a technical reference for connection agreements between DNOs and electricity producers and to demonstrate compliance with COMMISSION REGULATION (EU) 2016/631 (Requirements for Generators).

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Corrigendum – translation
    2 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50549-2:2019/AC:2019(Corrigendum)
Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network - Generating plants up to and including Type B
EN 50549-2:2019/AC:2019-03

2019-09-17: No XML available because of the template of CLC corrigendum

  • Corrigendum
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50549-2:2019(Main)
Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network - Generating plants up to and including Type B
EN 50549-2:2019

This standard provides technical requirements for the connection of generating plants up to and including Type B which can be operated in parallel with a public MV distribution network. They are intended to be used as a technical reference for connection agreements between DSOs and electricity producers and to demonstrate compliance with COMMISSION REGULATION (EU) 2016/631 (Requirements for Generators).

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50549-1:2019(Main)
Requirements for generating plants to be connected in parallel with distribution networks - Part 1: Connection to a LV distribution network - Generating plants up to and including Type B
EN 50549-1:2019

These standards provide technical requirements for the connection of generating plants up to and including Type A (-1-1)/ Type B (-1-2) which can be operated in parallel with a public LV distribution network. They are intended to be used as a technical reference for connection agreements between DNOs and electricity producers and to demonstrate compliance with COMMISSION REGULATION (EU) 2016/631 (Requirements for Generators).

  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    74 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50160:2011/A1:2015(Amendment)
Voltage characteristics of electricity supplied by public electricity networks
EN 50160:2010/A1:2015

Amendment to cover Norwegian A-deviation.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day