SIST EN 12365-2:2003

Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods

This part 2 of prEN 33/WI 131/245 specifies the method to be used to select, condition and test samples of gasket or weatherstripping, to determine the force required to deflect them by a predetermined amount under the conditions layed down in the test. The test has been devised to cover all likely gasket and weatherstripping shapes or materials.

Schlösser und Baubeschläge - Dichtungen und Dichtungenprofile für Fenster, Türen und andere Abschlüsse sowie vorgehängte Fassaden - Teil 2: Linearer Schließdruck, Prüfverfahren

Dieser Teil der EN WI 33245 legt das Verfahren fest, das für die Auswahl, Konditionierung und Prüfung von Proben von Dichtungen und Dichtungsprofilen a anzuwenden ist, um die erforderliche Kraft zu bestimmen, mit der sie unter den für die Prüfung vorgeschriebenen Bedingungen um ein zuvor festgelegtes Maß zusammengedrückt werden. Die Prüfung gilt für alle möglichen Formen oder Materialien von Dichtungen und Dichtungsprofilen.

Quincaillerie pour le bâtiment - Profilés d'étanchéité de vitrage et entre ouvrant et dormant pour portes, fenetres, fermetures et façades rideaux - Partie 2: Méthodes d'essai pour déterminer la réaction linéique a la déformation

La présente partie de l'EN 12365 spécifie la méthode devant etre utilisée pour sélectionner, préparer le conditionnement et soumettre aux essais des échantillons de profilés d'étanchéité de vitrage et entre ouvrant et dormant afin de déterminer la force nécessaire pour les comprimer et les déformer a leur épaisseur de travail minimale au moyen d'une valeur prédéterminée et ceci dans les conditions fixées pour l'essai.
Des exemples de détermination de la plage de travail de profilés d'étanchéité de vitrage et entre ouvrant et dormant types sont indiqués dans l'annexe A.

Stavbno okovje – Tesnila in tesnilni trakovi za vrata, okna, polkna in obešene fasade – 2. del: Preskusne metode za obremenjevanje z linijsko tlačno silo

General Information

• Status: Published
• Publication Date: 31-Oct-2003
• ICS: 91.060.50 - Doors and windows
• Technical Committee: ISTP - Doors and windows
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Nov-2003
• Due Date: 01-Nov-2003
• Completion Date: 01-Nov-2003
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 12365-2:2003 - Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods

Relations

• Parent: SIST EN 12365-1:2003 - Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schlösser und Baubeschläge - Dichtungen und Dichtungenprofile für Fenster, Türen und andere Abschlüsse sowie vorgehängte Fassaden - Teil 2: Linearer Schließdruck, PrüfverfahrenQuincaillerie pour le bâtiment - Profilés d'étanchéité de vitrage et entre ouvrant et dormant pour portes, fenetres, fermetures et façades rideaux - Partie 2: Méthodes d'essai pour déterminer la réaction linéique a la déformationBuilding hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods91.060.50Vrata in oknaDoors and windowsICS:Ta slovenski standard je istoveten z:EN 12365-2:2003SIST EN 12365-2:2003en,fr,de01-november-2003SIST EN 12365-2:2003SLOVENSKI
STANDARD



SIST EN 12365-2:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12365-2September 2003ICS 91.060.50; 91.190English versionBuilding hardware - Gasket and weatherstripping for doors,windows, shutters and curtain walling - Part 2: Linearcompression force test methodsQuincaillerie pour le bâtiment - Profilés d'étanchéité devitrage et entre ouvrant et dormant pour portes, fenêtres,fermetures et façades rideaux - Partie 2: Méthodes d'essaipour déterminer la réaction linéique à la déformationSchlösser und Baubeschläge - Dichtungen undDichtungenprofile für Fenster, Türen und andereAbschlüsse sowie vorgehängte Fassaden - Teil 2: LinearerSchließdruck, PrüfverfahrenThis European Standard was approved by CEN on 1 August 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12365-2:2003 ESIST EN 12365-2:2003



EN 12365-2:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Requirements.44.1Working range.44.2Linear compression force.55Test apparatus.56Test procedure.56.1Test measurements.56.2Test samples.66.2.1General.66.2.2Conditioning.66.3Preparation of test pieces.67Test method.67.1Temperature and humidity.67.2Determination of free height.67.3Compression test.67.4Expression of results.78Test report.7Annex A (informative)
Examples of determining the working range of typical gaskets andweatherstripping.8Annex B (informative)
Typical test apparatus.12Annex C (informative)
Flow chart of test procedure.13SIST EN 12365-2:2003



EN 12365-2:2003 (E)3ForewordThis document (EN 12365-2:2003) has been prepared by Technical Committee CEN/TC 33 “Doors,windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by March 2004, and conflicting national standards shallbe withdrawn at the latest by March 2004.EN 12365 – Building hardware – Gaskets and weatherstripping, consists of the following parts:— Part 1 : Performance requirements and classification;— Part 2 : Linear compression test method;— Part 3 : Deflection recovery test method;— Part 4 : Recovery after accelerated ageing test method.This European Standard is one of a series of European Standards for building hardware.Annexes A, B and C are informative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg,Malta, Netherlands, Norway, Portugal, Slovakia, Spai
...