SIST EN 12365-4:2003

Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method

This part 4 of prEN 33/WI131/247 specifies the method to be used to select, condition and test standard extruded samples of typical raw materials, to determine the percentage of long term recovery after being deflected through its working deflection range under the conditions layed down in the test. The test has been devised to cover all likely raw materials.

Baubeschläge - Dichtungen und Dichtungenprofile für Fenster, Türen und andere Abschlüsse sowie vorgehängte Fassaden - Teil 4: Langzeitrückstellvermögen, Prüfverfahren

Dieser Teil der EN WI 33247 legt das Verfahren fest, das für die Auswahl und K Konditionierung genormter stranggepreßter Proben aus den typischen Rohmaterialien anzuwenden ist, und dann an ihnen den prozentualen Anteil des Langzeitrückstellvermögens nach einer Durchbiegung innerhalb des Wirkungsbereichs unter den für die Prüfung vorgeschriebenen Bedingungen zu bestimmen. Die Prüfung gilt für alle möglichen Rohmaterialien.

Quincaillerie pour le bâtiment - Profilés d'étanchéité de vitrage et entre ouvrant et dormant pour portes, fenetres, fermetures et façades rideaux - Partie 4: Méthode d'essai pour déterminer la reprise élastique apres vieillissement

La présente partie de l'EN 12365 spécifie la méthode devant etre utilisée pour sélectionner, préparer, conditionner et soumettre aux essais des échantillons en matiere premiere type afin de déterminer les performances a long terme des profilés d'étanchéité de vitrage et entre ouvrant et dormant, dans les conditions fixées pour l'essai, apres vieillissement a la température maximale de travail.
L'essai a été conçu pour couvrir tous les types de matiere premiere.

Stavbno okovje – Tesnila in tesnilni trakovi za vrata, okna, polkna in obešene fasade – 4. del: Preskusna metoda za ugotavljanje povratnih deformacij po preskusu s pospešenim staranjem

General Information

• Status: Published
• Publication Date: 31-Oct-2003
• ICS: 91.060.50 - Doors and windows
• Technical Committee: ISTP - Doors and windows
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Nov-2003
• Due Date: 01-Nov-2003
• Completion Date: 01-Nov-2003
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 12365-4:2003 - Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method

Relations

• Parent: SIST EN 12365-1:2003 - Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stavbno okovje – Tesnila in tesnilni trakovi za vrata, okna, polkna in obešene fasade – 4. del: Preskusna metoda za ugotavljanje povratnih deformacij po preskusu s pospešenim staranjemBaubeschläge - Dichtungen und Dichtungenprofile für Fenster, Türen und andere Abschlüsse sowie vorgehängte Fassaden - Teil 4: Langzeitrückstellvermögen, PrüfverfahrenQuincaillerie pour le bâtiment - Profilés d'étanchéité de vitrage et entre ouvrant et dormant pour portes, fenetres, fermetures et façades rideaux - Partie 4: Méthode d'essai pour déterminer la reprise élastique apres vieillissementBuilding hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method91.060.50Vrata in oknaDoors and windowsICS:Ta slovenski standard je istoveten z:EN 12365-4:2003SIST EN 12365-4:2003en,fr,de01-november-2003SIST EN 12365-4:2003SLOVENSKI
STANDARD



SIST EN 12365-4:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12365-4September 2003ICS 91.060.50; 91.190English versionBuilding hardware - Gasket and weatherstripping for doors,windows, shutters and curtain walling - Part 4: Recovery afteraccelerated ageing test methodQuincaillerie pour le bâtiment - Profilés d'étanchéité devitrage et entre ouvrant et dormant pour portes, fenêtres,fermetures et façades rideaux - Partie 4: Méthode d'essaipour déterminer la reprise élastique après vieillissementBaubeschläge - Dichtungen und Dichtungenprofile fürFenster, Türen und andere Abschlüsse sowie vorgehängteFassaden - Teil 4: Langzeitrückstellvermögen,PrüfverfahrenThis European Standard was approved by CEN on 1 August 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12365-4:2003 ESIST EN 12365-4:2003



EN 12365-4:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Requirements.44.1Maximum working temperature range.44.2Recovery after accelerated ageing.55Test apparatus.55.1Compression block.55.2Heating chamber.56Test procedure.56.1Test measurements.56.2Test samples.66.2.1General.66.2.2Shape and size of test sample.66.2.3Conditioning.66.3Preparation of test pieces.67Test method.67.1General.67.2Temperature and humidity.67.3Determination of free height.77.4Deflection recovery test.77.5Re-measure free height.77.6Expression of results.87.7Determination of final result.88Test report.8Annex A (informative)
Typical compression block for deflection recovery test.9Annex B (informative)
Flow chart of test procedure.10Bibliography.11SIST EN 12365-4:2003



EN 12365-4:2003 (E)3ForewordThis document (EN 12365-4:2003) has been prepared by Technical Committee CEN/TC 33 "Doors,windows, shutters, building hardware and curtain walling", the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by March 2004, and conflicting national standards shallbe withdrawn at the latest by March 2004.EN 12365, Building hardware – Gaskets and weatherstripping, consists of the following parts:— Part 1: Performance requirements and classification;— Part 2: Linear compression test method;— Part 3: Deflection recovery test method;— Part 4: Recovery after accelerated ageing test method.This Standard is one of a series of European Standards for building hardware.Annexes A and B are informative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg,Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the UnitedKingdom.SIST EN 12365-4:2003



EN 12365-4:2003 (E)41 ScopeThis Part of this European Standard specifies the method to be used to select, prepare, condition andtest samples of typical raw materials, to determine the long term performance of gaskets andweatherstripping under the conditions laid down in the test after ageing at the maximum workingtemperature.The test has been devised to cover all likely raw materials.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text, and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions of anyof this publications
...